Port-ia64 archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: patch 20090202



Hi! Kochi-san,


From: KIYOHARA Takashi <kiyohara%kk.iij4u.or.jp@localhost>
Date: Tue, 10 Feb 2009 17:26:01 +0900 (JST)

> 'Pseudo Clock Rate' of 'Table 2-3: UART Device Descriptor Type'
> described:
> 
>   Pseudo Clock Rate. Clock Divisor = Baud Rate / Pseudo Clock Rate. On a
>   standard system, the Pseudo Clock Rate is 115200, for a baud rate of
>   115200, the Clock Divisor programmed is 1 (which is what is programmed
>   into the UART register).
> 
> We must use this to the 4th argment(frequency) for comcnattach().

Oops...  I was mistaking the 6th argument.
And I see panic message. ;-)

-----

Image base: 0x3ea51000

NetBSD/ia64 EFI boot, Revision 0.1
(lance%greed.sins.soum.co.jp@localhost, Sun Feb  8 21:49:31 JST 2009)


Type '?' for a list of commands, 'help' for more detailed help.
OK boot
|/2812448-\|+241960/+97256+80064-\| [138624/+88979-]=0x33eca8
netbsd entry at 0xe000000004008000
Entering ?m0? at 0xe000000004008000...
PAL Proc at 0xe00000003ff48010
SAL Proc at 0xe00000003fec21a0, GP at 0xe00000003fe00000
SAL: AP wake-up vector: 0xff
Platform clock frequency 200000000 Hz
Processor ratio 10/2, Bus ratio 1/1, ITC ratio 10/2
MD 0xe00000003e9d00b0: type 4 pa 0x0 cnt 0x1
MD 0xe00000003e9d00e0: type 7 pa 0x1000 cnt 0x9f
Loading descriptor 0xe00000003e9d00e0: 0x1 / 0x28
MD 0xe00000003e9d0110: type 11 pa 0xa0000 cnt 0x20
MD 0xe00000003e9d0140: type 5 pa 0xc0000 cnt 0x40
MD 0xe00000003e9d0170: type 7 pa 0x100000 cnt 0x3e8d0
Descriptor 0xe00000003e9d0170 contains kernel
Loading chunk before kernel: 0x40 / 0x1000
Loading chunk after kernel: 0x10d1 / 0xfa74
MD 0xe00000003e9d01a0: type 2 pa 0x3e9d0000 cnt 0x81
MD 0xe00000003e9d01d0: type 1 pa 0x3ea51000 cnt 0x2b
MD 0xe00000003e9d0200: type 7 pa 0x3ea7c000 cnt 0x5b7
Loading descriptor 0xe00000003e9d0200: 0xfa9f / 0xfc0c
MD 0xe00000003e9d0230: type 4 pa 0x3f033000 cnt 0x449
MD 0xe00000003e9d0260: type 7 pa 0x3f47c000 cnt 0x312
Loading descriptor 0xe00000003e9d0260: 0xfd1f / 0xfde3
MD 0xe00000003e9d0290: type 3 pa 0x3f78e000 cnt 0x36
MD 0xe00000003e9d02c0: type 5 pa 0x3f7c4000 cnt 0x3e
MD 0xe00000003e9d02f0: type 3 pa 0x3f802000 cnt 0x7a
MD 0xe00000003e9d0320: type 7 pa 0x3f87c000 cnt 0x11
Loading descriptor 0xe00000003e9d0320: 0xfe1f / 0xfe23
MD 0xe00000003e9d0350: type 5 pa 0x3f88d000 cnt 0x6f
MD 0xe00000003e9d0380: type 7 pa 0x3f8fc000 cnt 0x149
Loading descriptor 0xe00000003e9d0380: 0xfe3f / 0xfe91
MD 0xe00000003e9d03b0: type 6 pa 0x3fa45000 cnt 0x38
MD 0xe00000003e9d03e0: type 5 pa 0x3fa7d000 cnt 0x37a
MD 0xe00000003e9d0410: type 9 pa 0x3fdf7000 cnt 0x9
MD 0xe00000003e9d0440: type 5 pa 0x3fe00000 cnt 0x140
MD 0xe00000003e9d0470: type 13 pa 0x3ff40000 cnt 0x40
MD 0xe00000003e9d04a0: type 6 pa 0x3ff80000 cnt 0x80
MD 0xe00000003e9d04d0: type 11 pa 0x80000000 cnt 0x7e000
MD 0xe00000003e9d0500: type 11 pa 0xfed00000 cnt 0x1300
MD 0xe00000003e9d0530: type 11 pa 0x80000000000 cnt 0x80000000
MD 0xe00000003e9d0560: type 12 pa 0x3fffffc000000 cnt 0x4000
ptc.e base=0x0, count1=1, count2=1, stride1=0x0, stride2=0x0
Processor supports 24 Region ID bits
panic: kernel diagnostic assertion "ipl == IPL_NONE" failed: file 
"../../../../kern/kern_mutex.c", line 337
Begin traceback...
Unwind from arbitrary addresses unimplemented. 
trace from arbitrary trap frame address unimplemented. 
End traceback...
2 0 0x000063 0x0000000000000000 starting boot

          ******************************
          *                            *
          *          SEL FULL          *
          *                            *
          ******************************

0 0 0x000020 0x0000000000000000 CPU0 starting early config
       :
  ...<snip>...
       :


I will made patch.

Thanks,
--
kiyohara


Home | Main Index | Thread Index | Old Index