Just wondering if there are any Qube 2700 users out there, and if the
recent restore CDs work on that one.
5.1_RC2 one just works.
---
Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Fri Jun 5 10:42:59 PDT 1998
1.LCD Test................................PASS
2.Controller Test.........................PASS
4.Flash Test..............................PASS
5.Bank 0:.................................16M
6.Bank 1:.................................16M
7.Bank 2:.................................16M
8.Bank 3:.................................16M
9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
NetBSD/cobalt 5.1_RC2 Bootloader, Revision 0.9 [@0x80f00000]
(builds%b7.netbsd.org@localhost, Fri May 21 01:30:51 UTC 2010)
Model: Cobalt Qube 2700
Memory: 65536 k
PROM boot string: root=/dev/nfs nfsroot=/nfsroot nfsaddrs=bootp
Boot [nfs:netbsd]:
Loading: nfs:netbsd
3795200+312180 [218160+211100]=0x453e4c
Starting at 0x80001000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.1_RC2 (GENERIC) #0: Fri May 21 01:41:38 UTC 2010
builds%b7.netbsd.org@localhost:/home/builds/ab/netbsd-5-1-RC2/cobalt/201005210534Z-obj/home/builds/ab/netbsd-5-1-RC2/src/sys/arch/cobalt/compile/GENERIC
Cobalt Qube 2700
total memory = 65536 KB
avail memory = 59480 KB
mainbus0 (root)
cpu0 at mainbus0: QED RM5200 CPU (0x2810) Rev. 1.0 with built-in FPU Rev. 1.0
cpu0: 16KB/32B 2-way set-associative L1 Instruction cache, 48 TLB entries
cpu0: 16KB/32B 2-way set-associative write-back L1 Data cache
zsc0 at mainbus0 addr 0x1c800000 irq 4: optional Z85C30 serial port
zstty0 at zsc0 channel 0 (console i/o)
zstty1 at zsc0 channel 1
mcclock0 at mainbus0 addr 0x10000070: mc146818 compatible time-of-day clock
panel0 at mainbus0 addr 0x1f000000
gt0 at mainbus0 addr 0x14000000
pci0 at gt0
pchb0 at pci0 dev 0 function 0: Galileo GT-64011 System Controller, rev 1
tlp0 at pci0 dev 7 function 0: DECchip 21041 Ethernet, pass 2.1
tlp0: interrupting at level 2
tlp0: Ethernet address 00:10:e0:00:09:46
tlp0: 10baseT, 10baseT-FDX, 10base2, 10base5
pcib0 at pci0 dev 9 function 0
pcib0: VIA Technologies VT82C586 PCI-ISA Bridge, rev 39
viaide0 at pci0 dev 9 function 1
viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x02) at
pci0 dev 9 function 2 not configured
wd0 at atabus0 drive 0: <QUANTUM FIREBALLlct15 15>
wd0: 14324 MB, 29104 cyl, 16 head, 63 sec, 512 bytes/sect x 29336832 sectors
Kernelized RAIDframe activated
boot device: tlp0
root on tlp0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 10.0.0.254
nfs_boot: my_domain=netbsd.org
nfs_boot: my_addr=10.0.0.160
nfs_boot: my_mask=255.0.0.0
nfs_boot: gateway=10.0.0.254
root on 10.0.0.254:/nfsroot
root file system type: nfs
WARNING: clock gained 73 days
WARNING: CHECK AND RESET THE DATE!
warning: no /dev/console
Created mfs /dev (839680 byte, 1568 inodes)
Wed Aug 7 23:59:11 UTC 2010
Starting file system checks:
Create /dev/*
Unpack /var/*
Setting tty flags.
Setting sysctl variables:
kern.no_sa_support: 0 -> 1
ddb.onpanic: 1 -> 0
Starting network.
/etc/rc: WARNING: $hostname not set.
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:.
Mounting all filesystems...
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
/etc/rc: WARNING: No swap space configured!
Starting local daemons:.
Updating motd.
Starting paneld.
Starting inetd.
Thu Aug 8 00:00:05 UTC 2010
NetBSD/cobalt (Amnesiac) (ttyZ0)
login:
---
Izumi Tsutsui