Re: working X11 patches for cats

To: Chris Gilbert <chris%paradox.demon.co.uk@localhost>
Subject: Re: working X11 patches for cats
From: Nick Hudson <nick%nthcliff.demon.co.uk@localhost>
Date: Tue, 30 Jul 2002 08:22:21 +0100

On Sunday 28 July 2002 12:20 pm, Chris Gilbert wrote:
> Actually turns out this patch works fine, I was trying to push the gx
> card at a resoultion it didn't like in some way, dropping from 1152x968
> to 1024x768 and the gfx problems went away.  As for the keyboard adding
> the Option "XkbDisable" to the keyboard section seemed to make the
> keyboard work, still needs to be investigated as without xkb I've got a
> gb keyboard but getting US chars from it 8)

OK, I built and run this on my CATS with and S3 ViRGE/DX or /GX (see the log 
attached)

> Perforamance seems ok, aslong as you're not after xkobo, which causes
> some odd gfx problems, not sure if it's the gfx card or X (but X runs at
> near 100% when playing xkobo, so I've got to investigate further)

xkobo works fine for me. XFree take 20% of CPU.

> On Wed, 2002-07-24 at 19:38, Chris Gilbert wrote:
[...]
> > Note that some of the patch is rather icky in places, but it almost
> > works.  I've not figured out why the keyboard doesn't work yet, or why
> > there's screen corruption, I'm wondering about the SA having a writeback
> > cache has some bearing on the screen corruption.  I'm also not sure
> > about the console defines I'm using, if one of them is confusing the
> > build.

Keyboard works fine and I'm not getting any coruption.

> > Note that if anyone does try it they'll need remote access to kill the X
> > server.  Basically I wanted to show progress, and allow others to have a
> > fiddle 8)

huh? X starts and stops fine for me.

> > Note that you need a recent xsrc with 1.6.x or 1.6 -current for the
> > /dev/pci interfaces (you may need to run MAKEDEV pci0 in /dev

Yep, I needed MAKEDEV pci0

Good work Chris. Commit!

Nick

XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: NetBSD/cats 1.6_BETA2 [ELF] The NetBSD Foundation, Inc.
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Jul 30 06:58:48 2002
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "gb"
(**) XKB: layout: "gb"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to 
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(--) Using pcvt driver (version 3.32)
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:07:0: chip 10b9,1533 card 0000,0000 rev c3 class 06,01,00 hdr 00
(II) PCI: 00:08:0: chip 10b7,5900 card 0000,0000 rev 00 class 02,00,00 hdr 00
(II) PCI: 00:0a:0: chip 5333,8a01 card 5333,8a01 rev 01 class 03,00,00 hdr 00
(II) PCI: 00:10:0: chip 10b9,5229 card 0000,0000 rev c1 class 01,01,ea hdr 00
(II) PCI: 00:11:0: chip 10b9,7101 card 0000,0000 rev 00 class 06,80,00 hdr 00
(II) PCI: 00:14:0: chip 10b9,5237 card 0000,0000 rev 03 class 0c,03,10 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus 0 I/O range:
        [0] -1  0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
        [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
        [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(0:10:0) S3 ViRGE/DX or /GX rev 1, Mem @ 0x0c000000/26, BIOS @ 
0x10000000/16
(II) Addressable bus resource ranges are
        [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
        [1] -1  0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
        [0] -1  0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0x00000000 - 0x00000000 (0x1) MX[B]
        [2] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
        [3] -1  0x00000000 - 0x00000000 (0x1) IX[B]
(II) Active PCI resource ranges:
        [0] -1  0x10010000 - 0x1001ffff (0x10000) MX[B]E
        [1] -1  0x10000000 - 0x1000ffff (0x10000) MX[B](B)
        [2] -1  0x0c000000 - 0x0fffffff (0x4000000) MX[B](B)
        [3] -1  0x0000eca0 - 0x0000ecbf (0x20) IX[B]E
        [4] -1  0x0000ecc0 - 0x0000ecff (0x40) IX[B]E
        [5] -1  0x0000f0f0 - 0x0000f0ff (0x10) IX[B]E
        [6] -1  0x0000f8e0 - 0x0000f8ff (0x20) IX[B]E
(II) Active PCI resource ranges after removing overlaps:
        [0] -1  0x10010000 - 0x1001ffff (0x10000) MX[B]E
        [1] -1  0x10000000 - 0x1000ffff (0x10000) MX[B](B)
        [2] -1  0x0c000000 - 0x0fffffff (0x4000000) MX[B](B)
        [3] -1  0x0000eca0 - 0x0000ecbf (0x20) IX[B]E
        [4] -1  0x0000ecc0 - 0x0000ecff (0x40) IX[B]E
        [5] -1  0x0000f0f0 - 0x0000f0ff (0x10) IX[B]E
        [6] -1  0x0000f8e0 - 0x0000f8ff (0x20) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1  0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0x00000000 - 0x00000000 (0x1) MX[B]
        [2] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
        [3] -1  0x00000000 - 0x00000000 (0x1) IX[B]
(II) All system resource ranges:
        [0] -1  0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0x00000000 - 0x00000000 (0x1) MX[B]
        [2] -1  0x10010000 - 0x1001ffff (0x10000) MX[B]E
        [3] -1  0x10000000 - 0x1000ffff (0x10000) MX[B](B)
        [4] -1  0x0c000000 - 0x0fffffff (0x4000000) MX[B](B)
        [5] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1  0x00000000 - 0x00000000 (0x1) IX[B]
        [7] -1  0x0000eca0 - 0x0000ecbf (0x20) IX[B]E
        [8] -1  0x0000ecc0 - 0x0000ecff (0x40) IX[B]E
        [9] -1  0x0000f0f0 - 0x0000f0ff (0x10) IX[B]E
        [10] -1 0x0000f8e0 - 0x0000f8ff (0x20) IX[B]E
(II) ATI: ATI driver (version 6.4.8) for chipsets: ati
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
        ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
        ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
        ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
        ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI),
        ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),
        ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),
        ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
        ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
        ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
        ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
        ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LY (AGP),
        ATI Radeon Mobility LZ (AGP), ATI Radeon 8500 QL (AGP),
        ATI Radeon 8500 QN (AGP), ATI Radeon 8500 QO (AGP),
        ATI Radeon 8500 Ql (AGP), ATI Radeon 8500 BB (AGP),
        ATI Radeon 7500 QW (AGP)
(II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8,
        CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD,
        CL-GD5465, CL-GD7548
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
        mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400,
        mgag550
(II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4,
        pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta
(II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968,
        Trio32/64, Aurora64V+
(II) S3VIRGE: driver (version 1.8.3) for S3 ViRGE chipsets: virge, 86C325,
        virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
        86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
        trio 3d/2x, 86C362, 86C368
(II) SIS: driver for SiS chipsets: SIS5597, SIS530, SIS6326, SIS300,
        SIS630, SIS540
(II) SAVAGE: driver (version 1.1.20) for S3 Savage chipsets: Savage4,
        Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
        Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
        ProSavage PN133, ProSavage KN133, SuperSavage/MX 128,
        SuperSavage/MX 64, SuperSavage/MX 64C, SuperSavage/IX 128,
        SuperSavage/IX 128, SuperSavage/IX 64, SuperSavage/IX 64,
        SuperSavage/IXC 64, SuperSavage/IXC 64
(II) TRIDENT: driver for Trident chipsets: tvga9000, tvga9000i, tvga8900c,
        tvga8900d, tvga9200cxr, tgui9400cxi, cyber9320, cyber9388, cyber9397,
        cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4, tgui9420dgi,
        tgui9440agi, tgui9660, tgui9680, providia9682, providia9685,
        cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d, cyberbladei7,
        cyberbladei7d, cyberbladei1, cyberbladei1d, cyberbladeAi1,
        cyberbladeAi1d, cyberbladeXPm/8, cyberbladeXPm/16, cyberbladeXPAi1
(II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525,
        ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550,
        ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300
(II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
        3dfx Voodoo3, 3dfx Voodoo5
(II) FBDEV: driver for framebuffer: fbdev, afb
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) Primary Device is: PCI 00:0a:0
(--) Chipset virge dx found
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1  0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0x00000000 - 0x00000000 (0x1) MX[B]
        [2] -1  0x10010000 - 0x1001ffff (0x10000) MX[B]E
        [3] -1  0x10000000 - 0x1000ffff (0x10000) MX[B](B)
        [4] -1  0x0c000000 - 0x0fffffff (0x4000000) MX[B](B)
        [5] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1  0x00000000 - 0x00000000 (0x1) IX[B]
        [7] -1  0x0000eca0 - 0x0000ecbf (0x20) IX[B]E
        [8] -1  0x0000ecc0 - 0x0000ecff (0x40) IX[B]E
        [9] -1  0x0000f0f0 - 0x0000f0ff (0x10) IX[B]E
        [10] -1 0x0000f8e0 - 0x0000f8ff (0x20) IX[B]E
(II) resource ranges after probing:
        [0] -1  0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0x00000000 - 0x00000000 (0x1) MX[B]
        [2] -1  0x10010000 - 0x1001ffff (0x10000) MX[B]E
        [3] -1  0x10000000 - 0x1000ffff (0x10000) MX[B](B)
        [4] -1  0x0c000000 - 0x0fffffff (0x4000000) MX[B](B)
        [5] 0   0x000a0000 - 0x000affff (0x10000) MS[B]
        [6] 0   0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [7] 0   0x000b8000 - 0x000bffff (0x8000) MS[B]
        [8] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
        [9] -1  0x00000000 - 0x00000000 (0x1) IX[B]
        [10] -1 0x0000eca0 - 0x0000ecbf (0x20) IX[B]E
        [11] -1 0x0000ecc0 - 0x0000ecff (0x40) IX[B]E
        [12] -1 0x0000f0f0 - 0x0000f0ff (0x10) IX[B]E
        [13] -1 0x0000f8e0 - 0x0000f8ff (0x20) IX[B]E
        [14] 0  0x000003b0 - 0x000003bb (0xc) IS[B]
        [15] 0  0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(==) S3VIRGE(0): Depth 8, (==) framebuffer bpp 8
(==) S3VIRGE(0): Default visual is PseudoColor
(==) S3VIRGE(0): Using HW Cursor
(==) S3VIRGE(0): Using fb.
(==) S3VIRGE(0): mx_cr3a_fix.
(==) S3VIRGE(0): XVideo allowed (depends on chipset).
(II) S3VIRGE(0): initializing int10
(II) S3VIRGE(0): No legacy BIOS found -- trying PCI
(II) Truncating PCI BIOS Length to 32768
(II) S3VIRGE(0): VESA BIOS detected
(II) S3VIRGE(0): VESA VBE Version 2.0
(II) S3VIRGE(0): VESA VBE Total Mem: 4096 kB
(II) S3VIRGE(0): VESA VBE OEM: S3 Incorporated. ViRGE /DX /GX
(II) S3VIRGE(0): VESA VBE OEM Software Rev: 1.1
(II) S3VIRGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) S3VIRGE(0): VESA VBE OEM Product: ViRGE /DX /GX
(II) S3VIRGE(0): VESA VBE OEM Product Rev: Rev B
(--) S3VIRGE(0): Chipset: "virge dx"
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) S3VIRGE(0): VESA VBE DDC supported
(II) S3VIRGE(0): VESA VBE DDC Level 2
(II) S3VIRGE(0): VESA VBE DDC transfer in appr. 1 sec.
(II) S3VIRGE(0): VESA VBE DDC read successfully
(II) S3VIRGE(0): Manufacturer: DEL  Model: 708a  Serial#: 825773658
(II) S3VIRGE(0): Year: 2000  Week: 8
(II) S3VIRGE(0): EDID Version: 1.2
(II) S3VIRGE(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) S3VIRGE(0): Sync:  Separate
(II) S3VIRGE(0): Max H-Image Size [cm]: horiz.: 36  vert.: 27
(II) S3VIRGE(0): Gamma: 2.74
(II) S3VIRGE(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) S3VIRGE(0): First detailed timing is preferred mode
(II) S3VIRGE(0): redX: 0.615 redY: 0.350   greenX: 0.290 greenY: 0.610
(II) S3VIRGE(0): blueX: 0.155 blueY: 0.070   whiteX: 0.281 whiteY: 0.311
(II) S3VIRGE(0): Supported VESA Video Modes:
(II) S3VIRGE(0): 720x400@70Hz
(II) S3VIRGE(0): 640x480@60Hz
(II) S3VIRGE(0): 640x480@75Hz
(II) S3VIRGE(0): 800x600@75Hz
(II) S3VIRGE(0): 1024x768@75Hz
(II) S3VIRGE(0): 1280x1024@75Hz
(II) S3VIRGE(0): Manufacturer's mask: 0
(II) S3VIRGE(0): Supported Future Video Modes:
(II) S3VIRGE(0): #0: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) S3VIRGE(0): #1: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) S3VIRGE(0): #2: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) S3VIRGE(0): #3: hsize: 1280  vsize 1024  refresh: 85  vid: 39297
(II) S3VIRGE(0): #4: hsize: 1600  vsize 1200  refresh: 75  vid: 20393
(II) S3VIRGE(0): Supported additional Video Mode:
(II) S3VIRGE(0): clock: 157.5 MHz   Image Size:  355 x 265 mm
(II) S3VIRGE(0): h_active: 1280  h_sync: 1344  h_sync_end 1504 h_blank_end 1728 
h_border: 0
(II) S3VIRGE(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1072 
v_border: 0
(II) S3VIRGE(0): Serial No: 1238PM18NZ20
(II) S3VIRGE(0): Monitor name: DELL M990
(II) S3VIRGE(0): Ranges: V min: 50  V max: 160 Hz, H min: 30  H max: 96 kHz, 
PixClock max 2550 MHz
(==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) S3VIRGE(0): videoram:  4096k
(--) S3VIRGE(0): Detected current MCLK value of 47.131 MHz
(WW) S3VIRGE(0): Monitor0: Using default hsync range of 30.00-96.00kHz
(WW) S3VIRGE(0): Monitor0: using default vrefresh range of 50.00-160.00Hz
(II) S3VIRGE(0): Clock range:  20.00 to 270.00 MHz
(II) S3VIRGE(0): Not using default mode "320x175" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x200" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "360x200" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "576x432" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "640x480" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "640x480" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "640x512" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "640x512" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "640x512" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of 
range)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of 
range)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of 
range)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of 
range)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of 
range)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1792x1344" (horizontal timing out of 
range)
(II) S3VIRGE(0): Not using default mode "896x672" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1792x1344" (horizontal timing out of 
range)
(II) S3VIRGE(0): Not using default mode "896x672" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1856x1392" (horizontal timing out of 
range)
(II) S3VIRGE(0): Not using default mode "928x696" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1856x1392" (horizontal timing out of 
range)
(II) S3VIRGE(0): Not using default mode "928x696" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1920x1440" (horizontal timing out of 
range)
(II) S3VIRGE(0): Not using default mode "960x720" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1920x1440" (horizontal timing out of 
range)
(II) S3VIRGE(0): Not using default mode "960x720" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "700x525" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "700x525" (bad mode 
clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "800x512" (bad mode 
clock/interlace/doublescan)
(--) S3VIRGE(0): Virtual size is 1400x1050 (pitch 1400)
(**) S3VIRGE(0): Default mode "1400x1050": 155.8 MHz, 81.5 kHz, 74.8 Hz
(II) S3VIRGE(0): Modeline "1400x1050"  155.80  1400 1464 1784 1912  1050 1052 
1064 1090 +hsync +vsync
(**) S3VIRGE(0): Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "1400x1050"  122.00  1400 1488 1640 1880  1050 1052 
1064 1082 +hsync +vsync
(**) S3VIRGE(0): Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "1280x1024"  157.50  1280 1344 1504 1728  1024 1025 
1028 1072 +hsync +vsync
(**) S3VIRGE(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) S3VIRGE(0): Modeline "1280x1024"  135.00  1280 1296 1440 1688  1024 1025 
1028 1066 +hsync +vsync
(**) S3VIRGE(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 
1028 1066 +hsync +vsync
(**) S3VIRGE(0): Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "1280x960"  148.50  1280 1344 1504 1728  960 961 964 
1011 +hsync +vsync
(**) S3VIRGE(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "1280x960"  108.00  1280 1376 1488 1800  960 961 964 
1000 +hsync +vsync
(**) S3VIRGE(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) S3VIRGE(0): Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 868 
900 +hsync +vsync
(**) S3VIRGE(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 
808 +hsync +vsync
(**) S3VIRGE(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) S3VIRGE(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 
800 +hsync +vsync
(**) S3VIRGE(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) S3VIRGE(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 
806 -hsync -vsync
(**) S3VIRGE(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 
806 -hsync -vsync
(**) S3VIRGE(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) S3VIRGE(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 776 
817 interlace +hsync +vsync
(**) S3VIRGE(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) S3VIRGE(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 
+hsync +vsync
(**) S3VIRGE(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) S3VIRGE(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 
+hsync +vsync
(**) S3VIRGE(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) S3VIRGE(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 
+hsync +vsync
(**) S3VIRGE(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) S3VIRGE(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 
+hsync +vsync
(**) S3VIRGE(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) S3VIRGE(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 
+hsync +vsync
(**) S3VIRGE(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 
-hsync -vsync
(**) S3VIRGE(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) S3VIRGE(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 
-hsync -vsync
(**) S3VIRGE(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) S3VIRGE(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 
-hsync -vsync
(**) S3VIRGE(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 
-hsync -vsync
(**) S3VIRGE(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 
-hsync +vsync
(**) S3VIRGE(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) S3VIRGE(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 
-hsync +vsync
(**) S3VIRGE(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) S3VIRGE(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 
+hsync -vsync
(--) S3VIRGE(0): Display dimensions: (360, 270) mm
(--) S3VIRGE(0): DPI set to (98, 98)
(II) resource ranges after preInit:
        [0] 0   0x0c000000 - 0x0fffffff (0x4000000) MS[B]
        [1] -1  0xffffffff - 0xffffffff (0x1) MX[B]
        [2] -1  0x00000000 - 0x00000000 (0x1) MX[B]
        [3] -1  0x10010000 - 0x1001ffff (0x10000) MX[B]E
        [4] -1  0x10000000 - 0x1000ffff (0x10000) MX[B](B)
        [5] -1  0x0c000000 - 0x0fffffff (0x4000000) MX[B](B)
        [6] 0   0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
        [7] 0   0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
        [8] 0   0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
        [9] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
        [10] -1 0x00000000 - 0x00000000 (0x1) IX[B]
        [11] -1 0x0000eca0 - 0x0000ecbf (0x20) IX[B]E
        [12] -1 0x0000ecc0 - 0x0000ecff (0x40) IX[B]E
        [13] -1 0x0000f0f0 - 0x0000f0ff (0x10) IX[B]E
        [14] -1 0x0000f8e0 - 0x0000f8ff (0x20) IX[B]E
        [15] 0  0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
        [16] 0  0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) S3VIRGE(0): Using FB
(II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        CPU to Screen color expansion
        Solid Horizontal and Vertical Lines
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                32 128x128 slots
                13 256x256 slots
                4 512x512 slots
(==) S3VIRGE(0): Backing store disabled
(==) S3VIRGE(0): Silken mouse enabled
(**) Option "dpms"
(**) S3VIRGE(0): DPMS enabled
(**) Option "Protocol" "wsmouse"
(**) Mouse0: Protocol: wsmouse
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/wsmouse0"
(==) Mouse0: Buttons: 3
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)

Follow-Ups:
- Re: working X11 patches for cats
  - From: Chris Gilbert
- Re: working X11 patches for cats
  - From: Stephen Borrill

References:
- semi-working X11 patches for cats
  - From: Chris Gilbert
- Re: working X11 patches for cats
  - From: Chris Gilbert

Prev by Date: Re: working X11 patches for cats
Next by Date: Re: working X11 patches for cats
Previous by Thread: Re: working X11 patches for cats
Next by Thread: Re: working X11 patches for cats
Indexes:

Home | Main Index | Thread Index | Old Index