| Re : https://mail-index.netbsd.org/port-arm/2019/09/26/msg006179.html over arm64.img arm64# uname -a NetBSD arm64 9.99.13 NetBSD 9.99.13 (RPI4TEST64) #0: Thu Sep 26 11:24:00 UTC 20m ----- begin coldboot -------- sudo minicom -D /dev/ttyAMA0 -b 115200 Willkommen zu minicom 2.7 Optionen: I18n Übersetzt am Apr 22 2017, 09:14:19. Port /dev/ttyAMA0, 06:44:08 Drücken Sie CTRL-A Z für Hilfe zu speziellen Tasten boot NetBSD/aarch64 PC = 0000000000200838 SP = 0000000000df6000 CurrentEL = 0000000000000002 SCTLR_EL2 = 0000000030c50830 HCR_EL2 = 0000000000000000 SPSR_EL1 = 0000000000000010 CNTFREQ_EL0 = 000000000337f980 SCTLR_EL1 = 0000000000c50838 MIDR_EL1 = 00000000410fd083 MPIDR_EL1 = 0000000080000000 ID_AA64MPFR0_EL1 = 0000000000002222 ID_AA64MPFR1_EL1 = 0000000000000000 ID_AA64ISAR0_EL1 = 0000000000010000 ID_AA64ISAR1_EL1 = 0000000000000000 ID_AA64MMFR0_EL1 = 0000000000001124 ID_AA64MMFR1_EL1 = 0000000000000000 Drop to EL1...OK CurrentEL = 0000000000000001 Creating VA=PA tables (0x00000000-0xffffffff) Creating VA=PA tables for kernel image Creating VA=PA tables for FDT Creating KVA=PA tables OK MMU Enable...OK SPSR_EL1 = 0000000000000010 DAIF = 0000000000000000 vstart = ffffffc000001898 PC = ffffffc000001898 SP(lwp0,kvm) = ffffffc000bf5ed0 curcpu = ffffffc000a28b00 initarm [ 1.0000000] FDT<0x2eff5f00> [ 1.0000000] cpufunc [ 1.0000000] devmap [ 1.0000000] pmap_devmap_bootstrap: [ 1.0000000] devmap: pa fe000000-feffffff = va fffffffff7000000 [ 1.0000000] devmap: pa ff800000-ff9fffff = va fffffffff6800000 [ 1.0000000] devmap: pa 00000000-00000fff = va fffffffff0000000 [ 1.0000000] bootstrap [ 1.0000000] bcm283x_bootparams: memory size 1006632960 [ 1.0000000] bcm283x_bootparams: arm clock 1500000000 [ 1.0000000] bcm283x_bootparams: vpu clock 432000000 [ 1.0000000] bcm283x_bootparams: emmc clock 200000000 [ 1.0000000] bcm283x_bootparams: firmware rev 5d39ecad [ 1.0000000] bcm283x_bootparams: board model 0 [ 1.0000000] bcm283x_bootparams: mac-address 57e92132a6dc [ 1.0000000] bcm283x_bootparams: board rev c03111 [ 1.0000000] bcm283x_bootparams: board serial 10000000fca20bfc [ 1.0000000] bcm283x_bootparams: DMA channel mask 0x000071f5 [ 1.0000000] bcm283x_bootparams: cmdline bcm2708_fb.fbwidth=656 bcm2708_x [ 1.0000000] stdout [ 1.0000000] consinit ok [ 1.0000000] uboot: args 0x2eff5f00, 0, 0, 0 [ 1.0000000] NetBSD/evbarm (fdt) booting ... [ 1.0000000] FDT /memory [0] @ 0x0 size 0x3c000000 [ 1.0000000] FDT /memory [1] @ 0x40000000 size 0xbc000000 [ 1.0000000] initarm: memory start 0 end fc000000 (len fc000000) [ 1.0000000] initarm: fdt_build_bootconfig [ 1.0000000] Usable memory: [ 1.0000000] 1000 - 3bffffff [ 1.0000000] 40000000 - fbffffff [ 1.0000000] Creating KSEG tables for 0000000000001000-00000000001fffff (L3) [ 1.0000000] Creating KSEG tables for 0000000000200000-000000003bffffff (L2) [ 1.0000000] Creating KSEG tables for 0000000040000000-00000000bfffffff (L1) [ 1.0000000] Creating KSEG tables for 00000000c0000000-00000000fbffffff (L2) [ 1.0000000] write protect 0xffffffc000000000 .. 0xffffffc000a00000 [ 1.0000000] va ffffffc000000000 -> pa 0000000000fac000 -> l0 ffff000000fac000 [ 1.0000000] va ffffffc000200000 -> pa 0000000000fac000 -> l0 ffff000000fac000 [ 1.0000000] va ffffffc000400000 -> pa 0000000000fac000 -> l0 ffff000000fac000 [ 1.0000000] va ffffffc000600000 -> pa 0000000000fac000 -> l0 ffff000000fac000 [ 1.0000000] va ffffffc000800000 -> pa 0000000000fac000 -> l0 ffff000000fac000 [ 1.0000000] exec protect 0xffffffc000600000 .. 0xffffffc000dbb000 [ 1.0000000] va ffffffc000600000 -> pa 0000000000fac000 -> l0 ffff000000fac000 [ 1.0000000] va ffffffc000800000 -> pa 0000000000fac000 -> l0 ffff000000fac000 [ 1.0000000] va ffffffc000a00000 -> pa 0000000000fac000 -> l0 ffff000000fac000 [ 1.0000000] va ffffffc000c00000 -> pa 0000000000fac000 -> l0 ffff000000fac000 [ 1.0000000] cpu_kernel_vm_init: kernel phys start 200000 end fac000+f000 [ 1.0000000] bootargs: 8250.nr_uarts=1 cma=64M bcm2708_fb.fbwidth=656 bcm2708x [ 1.0000000] Memory regions: [ 1.0000000] 1000 - 1fffff [ 1.0000000] fbb000 - 3bffffff [ 1.0000000] 40000000 - fbffffff [ 1.0000000] ------------------------------------------ [ 1.0000000] kern_vtopdiff = 0xffffffbfffe00000 [ 1.0000000] physical_start = 0x0000000000001000 [ 1.0000000] kernel_start_phys = 0x0000000000200000 [ 1.0000000] kernel_end_phys = 0x0000000000fac000 [ 1.0000000] msgbuf = 0x000000003bff0000 [ 1.0000000] physical_end = 0x00000000fc000000 [ 1.0000000] VM_MIN_KERNEL_ADDRESS = 0xffffffc000000000 [ 1.0000000] kernel_start_l2 = 0xffffffc000000000 [ 1.0000000] kernel_start = 0xffffffc000000000 [ 1.0000000] kernel_end = 0xffffffc000dac000 [ 1.0000000] pagetables = 0xffffffc000dac000 [ 1.0000000] pagetables_end = 0xffffffc000dbb000 [ 1.0000000] kernel_end_l2 = 0xffffffc000e00000 [ 1.0000000] module_start = 0xffffffc000e00000 [ 1.0000000] module_end = 0xffffffc002e00000 [ 1.0000000] (kernel va area) [ 1.0000000] (devmap va area) = 0xfffffffff0000000 [ 1.0000000] VM_MAX_KERNEL_ADDRESS = 0xffffffffffe00000 [ 1.0000000] ------------------------------------------ [ 1.0000000] mpstart [CPU1] PC = 0000000000201a50 [CPU1] SP = 0000000000df7e00 [CPU1] CurrentEL = 0000000000000002 [CPU1] SCTLR_EL2 = 0000000030c50830 [CPU1] HCR_EL2 = 0000000000000000 [CPU1] SPSR_EL1 = 0000000000000010 [CPU1] SCTLR_EL1 = 0000000000c50838 [CPU1] MIDR_EL1 = 00000000410fd083 [CPU1] MPIDR_EL1 = 0000000080000001 [CPU1] Drop to EL1... [CPU1] Drop to EL1 OK [CPU1] CurrentEL = 0000000000000001 [CPU1] MMU Enable... [CPU1] MMU Enable OK [CPU1] PC = ffffffc000001cfc [CPU1] arm_cpu_hatched |= 0000000000000002 [CPU2] PC = 0000000000201a50 [CPU2] SP = 0000000000df7d00 [CPU2] CurrentEL = 0000000000000002 [CPU2] SCTLR_EL2 = 0000000030c50830 [CPU2] HCR_EL2 = 0000000000000000 [CPU2] SPSR_EL1 = 0000000000000010 [CPU2] SCTLR_EL1 = 0000000000c50838 [CPU2] MIDR_EL1 = 00000000410fd083 [CPU2] MPIDR_EL1 = 0000000080000002 [CPU2] Drop to EL1... [CPU2] Drop to EL1 OK [CPU2] CurrentEL = 0000000000000001 [CPU2] MMU Enable... [CPU2] MMU Enable OK [CPU2] PC = ffffffc000001cfc [CPU2] arm_cpu_hatched |= 0000000000000004 [CPU3] PC = 0000000000201a50 [CPU3] SP = 0000000000df7c00 [CPU3] CurrentEL = 0000000000000002 [CPU3] SCTLR_EL2 = 0000000030c50830 [CPU3] HCR_EL2 = 0000000000000000 [CPU3] SPSR_EL1 = 0000000000000010 [CPU3] SCTLR_EL1 = 0000000000c50838 [CPU3] MIDR_EL1 = 00000000410fd083 [CPU3] MPIDR_EL1 = 0000000080000003 [CPU3] Drop to EL1... [CPU3] Drop to EL1 OK [CPU3] CurrentEL = 0000000000000001 [CPU3] MMU Enable... [CPU3] MMU Enable OK [CPU3] PC = ffffffc000001cfc [CPU3] arm_cpu_hatched |= 0000000000000008 main [ 1.0000000] pool redzone disabled for 'kmem-4096' [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 20, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, , [ 1.0000000] 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights res. [ 1.0000000] NetBSD 9.99.13 (RPI4TEST64) #0: Thu Sep 26 11:24:00 UTC 2019 [ 1.0000000] mlelstv@slowpoke:/home/netbsd-current/obj.evbarm64-el/scratch/n4 [ 1.0000000] total memory = 3954 MB [ 1.0000000] avail memory = 3812 MB [ 1.0000000] pool redzone disabled for 'buf4k' [ 1.0000000] pool redzone disabled for 'buf64k' [ 1.0000000] timecounter: Timecounters tick every 10.000 msec [ 1.0000000] armfdt0 (root) [ 1.0000000] simplebus0 at armfdt0: Raspberry Pi 4 Model B Rev 1.1 [ 1.0000000] simplebus1 at simplebus0 (/soc) [ 1.0000000] simplebus1: WARNING: power management not supported [ 1.0000000] simplebus2 at simplebus0 (/clocks) [ 1.0000000] simplebus2: WARNING: power management not supported [ 1.0000000] simplebus3 at simplebus0 (/scb) [ 1.0000000] simplebus3: WARNING: power management not supported [ 1.0000000] cpus0 at simplebus0 (/cpus) [ 1.0000000] cpus0: WARNING: power management not supported [ 1.0000000] simplebus4 at simplebus0 (/v3dbus) [ 1.0000000] simplebus4: WARNING: power management not supported [ 1.0000000] simplebus5 at simplebus0 (/chosen) [ 1.0000000] simplebus5: WARNING: power management not supported [ 1.0000000] cpu0 at cpus0 (/cpus/cpu@0): Cortex-A72 r0p3 (Cortex V8-A core) [ 1.0000000] cpu0: package 0, core 0, smt 0 [ 1.0000000] cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabd [ 1.0000000] cpu0: Cache Writeback Granule 16B, Exclusives Reservation GranulB [ 1.0000000] cpu0: Dcache line 64, Icache line 64 [ 1.0000000] cpu0: L1 48KB/64B 3-way read-allocate PIPT Instruction cache [ 1.0000000] cpu0: L1 32KB/64B 2-way write-back read-allocate write-allocate e [ 1.0000000] cpu0: L2 1024KB/64B 16-way write-back read-allocate write-allocae [ 1.0000000] cpu0: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID [ 1.0000000] cpu0: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation,d [ 1.0000000] cpu0: A72 errata #859971 present, workaround NOT enabled (U-Boot) [ 1.0000000] cpu0: WARNING: power management not supported [ 1.0000000] cpu1 at cpus0 (/cpus/cpu@1): Cortex-A72 r0p3 (Cortex V8-A core) [ 1.0000000] cpu1: package 0, core 1, smt 0 [ 1.0000000] cpu1: WARNING: power management not supported [ 1.0000000] cpu2 at cpus0 (/cpus/cpu@2): Cortex-A72 r0p3 (Cortex V8-A core) [ 1.0000000] cpu2: package 0, core 2, smt 0 [ 1.0000000] cpu2: WARNING: power management not supported [ 1.0000000] cpu3 at cpus0 (/cpus/cpu@3): Cortex-A72 r0p3 (Cortex V8-A core) [ 1.0000000] cpu3: package 0, core 3, smt 0 [ 1.0000000] cpu3: WARNING: power management not supported [ 1.0000000] simplebus6 at simplebus1 (/soc/firmware) [ 1.0000000] simplebus6: WARNING: power management not supported [ 1.0000000] gic0 at simplebus1 (/soc/gic400@40041000): GIC [ 1.0000000] armgic0 at gic0: Generic Interrupt Controller, 256 sources (247 ) [ 1.0000000] armgic0: Architecture version 2 (0x43b:32 rev 1) [ 1.0000000] armgic0: 16 Priorities, 224 SPIs, 7 PPIs, 16 SGIs [ 1.0000000] armgic0: WARNING: power management not supported [ 1.0000000] gic0: WARNING: power management not supported [ 1.0000000] bcmcprman0 at simplebus1 (/soc/cprman@7e101000): BCM283x Clock Cr [ 1.0000000] bcmcprman0: WARNING: power management not supported [ 1.0000000] fclock0 at simplebus2 (/clocks/clock@3): 54000000 Hz fixed clock) [ 1.0000000] fclock0: WARNING: power management not supported [ 1.0000000] bcmaux0 at simplebus1 (/soc/aux@7e215000) [ 1.0000000] bcmaux0: WARNING: power management not supported [ 1.0000000] fclock1 at simplebus2 (/clocks/clock@4): 480000000 Hz fixed cloc) [ 1.0000000] fclock1: WARNING: power management not supported [ 1.0000000] bcmicu0 at simplebus1 (/soc/local_intc@40000000): Multiprocessor [ 1.0000000] bcmicu0: WARNING: power management not supported [ 1.0000000] gtmr0 at simplebus0 (/timer): Generic Timer [ 1.0000000] gtmr0: interrupting on GIC irq 27 [ 1.0000000] armgtmr0 at gtmr0: Generic Timer (54000 kHz, virtual) [ 1.0000000] timecounter: Timecounter "armgtmr0" frequency 54000000 Hz qualit0 [ 1.0000030] armgtmr0: WARNING: power management not supported [ 1.0000030] gtmr0: WARNING: power management not supported [ 1.0000030] gregulator0 at simplebus0 (/sd_io_1v8_reg): vdd-sd-io [ 1.0000030] gregulator0: cannot get pin 0 [ 1.0000030] gregulator0: WARNING: power management not supported [ 1.0000030] plcom0 at simplebus1 (/soc/serial@7e201000): ARM PL011 UART [ 1.0000030] plcom0: txfifo disabled [ 1.0000030] plcom0: interrupting on GIC irq 153 [ 1.0000030] plcom0: WARNING: power management not supported [ 1.0000030] com0 at simplebus1 (/soc/serial@7e215040): BCM AUX UART, workingo [ 1.0000030] com0: console [ 1.0000030] com0: interrupting on GIC irq 125 [ 1.0000030] com0: WARNING: power management not supported [ 1.0000030] fregulator0 at simplebus0 (/fixedregulator_5v0): 5v0 [ 1.0000030] fregulator0: WARNING: power management not supported [ 1.0000030] fregulator1 at simplebus0 (/fixedregulator_3v3): 3v3 [ 1.0000030] fregulator1: WARNING: power management not supported [ 1.0000030] /soc/thermal@7d5d2200 at simplebus1 <brcm,avs-tmon-bcm2838> not d [ 1.0000030] /soc/dsi@7e209000 at simplebus1 <brcm,bcm2835-dsi0> not configurd [ 1.0000030] bcmgpio0 at simplebus1 (/soc/gpio@7e200000): GPIO controller [ 1.0000030] bcmgpio0: attach pin 0 [ 1.0000030] bcmgpio0: attach pin 1 [ 1.0000030] bcmgpio0: attach pin 2 [ 1.0000030] bcmgpio0: attach pin 3 [ 1.0000030] bcmgpio0: attach pin 4 [ 1.0000030] bcmgpio0: attach pin 5 [ 1.0000030] bcmgpio0: attach pin 6 [ 1.0000030] bcmgpio0: attach pin 7 [ 1.0000030] bcmgpio0: attach pin 8 [ 1.0000030] bcmgpio0: attach pin 9 [ 1.0000030] bcmgpio0: attach pin 10 [ 1.0000030] bcmgpio0: attach pin 11 [ 1.0000030] bcmgpio0: attach pin 12 [ 1.0000030] bcmgpio0: attach pin 13 [ 1.0000030] bcmgpio0: skip pin 14 - func = 2 [ 1.0000030] bcmgpio0: skip pin 15 - func = 2 [ 1.0000030] bcmgpio0: attach pin 16 [ 1.0000030] bcmgpio0: attach pin 17 [ 1.0000030] bcmgpio0: attach pin 18 [ 1.0000030] bcmgpio0: attach pin 19 [ 1.0000030] bcmgpio0: attach pin 20 [ 1.0000030] bcmgpio0: attach pin 21 [ 1.0000030] bcmgpio0: attach pin 22 [ 1.0000030] bcmgpio0: attach pin 23 [ 1.0000030] bcmgpio0: attach pin 24 [ 1.0000030] bcmgpio0: attach pin 25 [ 1.0000030] bcmgpio0: attach pin 26 [ 1.0000030] bcmgpio0: attach pin 27 [ 1.0000030] bcmgpio0: skip pin 28 - func = 2 [ 1.0000030] bcmgpio0: skip pin 29 - func = 2 [ 1.0000030] bcmgpio0: attach pin 30 [ 1.0000030] bcmgpio0: attach pin 31 [ 1.0000030] bcmgpio0: attach pin 32 [ 1.0000030] bcmgpio0: attach pin 33 [ 1.0000030] bcmgpio0: attach pin 34 [ 1.0000030] bcmgpio0: attach pin 35 [ 1.0000030] bcmgpio0: attach pin 36 [ 1.0000030] bcmgpio0: attach pin 37 [ 1.0000030] bcmgpio0: attach pin 38 [ 1.0000030] bcmgpio0: attach pin 39 [ 1.0000030] bcmgpio0: skip pin 40 - func = 4 [ 1.0000030] bcmgpio0: skip pin 41 - func = 4 [ 1.0000030] bcmgpio0: attach pin 42 [ 1.0000030] bcmgpio0: attach pin 43 [ 1.0000030] bcmgpio0: attach pin 44 [ 1.0000030] bcmgpio0: attach pin 45 [ 1.0000030] bcmgpio0: attach pin 46 [ 1.0000030] bcmgpio0: attach pin 47 [ 1.0000030] bcmgpio0: attach pin 48 [ 1.0000030] bcmgpio0: attach pin 49 [ 1.0000030] bcmgpio0: attach pin 50 [ 1.0000030] bcmgpio0: attach pin 51 [ 1.0000030] bcmgpio0: attach pin 52 [ 1.0000030] bcmgpio0: attach pin 53 [ 1.0000030] bcmgpio0: pins 0..31 interrupting on GIC irq 145 [ 1.0000030] bcmgpio0: pins 32..54 interrupting on GIC irq 146 [ 1.0000030] pinctrl: set config pinctrl-0 for /soc/serial@7e201000 [ 1.0000030] pinctrl: set config pinctrl-0 for /soc/serial@7e215040 [ 1.0000030] pinctrl: set config pinctrl-0 for /soc/mmcnr@7e300000 [ 1.0000030] gpio0 at bcmgpio0: 54 pins [ 1.0000030] bcmgpio0: WARNING: power management not supported [ 1.0000030] bcmdmac0 at simplebus1 (/soc/dma@7e007000): DMA0 DMA2 DMA4 DMA5 4 [ 1.0000030] bcmdmac0: WARNING: power management not supported [ 1.0000030] /soc/power at simplebus1 <raspberrypi,bcm2835-power> not configud [ 1.0000030] /phy at simplebus0 <usb-nop-xceiv> not configured [ 1.0000030] bcmmbox0 at simplebus1 (/soc/mailbox@7e00b880): VC mailbox [ 1.0000030] bcmmbox0: interrupting on GIC irq 65 [ 1.0000030] vcmbox0 at bcmmbox0 [ 1.0000030] vcmbox0: WARNING: power management not supported [ 1.0000030] bcmmbox0: WARNING: power management not supported [ 1.0000030] bcmpmwdog0 at simplebus1 (/soc/watchdog@7e100000): Power managemr [ 1.0000030] bcmpmwdog0: WARNING: power management not supported [ 1.0000030] /scb/pcie@7d500000 at simplebus3 <brcm,bcm7211-pcie> <brcm,bcm74d [ 1.0000030] /scb/genet@7d580000 at simplebus3 <brcm,genet-v5> not configured [ 1.0000030] bcm2838rng0 at simplebus1 (/soc/rng@7e104000): Hardware RNG [ 1.0000030] bcm2838rng0: WARNING: power management not supported [ 1.0000030] sdhc0 at simplebus1 (/soc/mmcnr@7e300000): SDHC controller [ 1.0000030] sdhc0: ref freq 200000 kHz [ 1.0000030] sdhc0: interrupting on GIC irq 158 : failed to decode interrupt [ 1.0000030] gpioleds0 at simplebus0 (/leds): led0 [ 1.0000030] gpioleds0: WARNING: power management not supported [ 1.0000030] /soc/firmware/gpio at simplebus6 <raspberrypi,firmware-gpio> notd [ 1.0000030] dwctwo0 at simplebus1 (/soc/usb@7e980000): USB controller [ 1.0000030] dwctwo0: interrupting on GIC irq 105 [ 1.0000030] sdhc1 at simplebus1 (/soc/emmc2@7e340000): SDHC controller [ 1.0000030] sdhc1: ref freq 100000 kHz [ 1.0000030] sdhc1: interrupting on GIC irq 158 [ 1.0000030] genfb0 at simplebus1 (/soc/fb)rpi_fb_init: addr = 0xfe876000 siz0 [ 1.0000030] rpi_fb_init: depth = 32 [ 1.0000030] rpi_fb_init: pitch = 5120 [ 1.0000030] rpi_fb_init: width = 1280 height = 720 [ 1.0000030] rpi_fb_init: vwidth = 1280 vheight = 720 [ 1.0000030] genfb0: framebuffer at 0xfe876000, size 1280x720, depth 32, stri0 [ 1.0000030] wsdisplay0 at genfb0 kbdmux 1 [ 1.0000030] wsmux1: connecting to wsdisplay0 [ 1.0000030] wsdisplay0: screen 0-3 added (default, vt100 emulation) [ 1.0000030] /soc/vcsm at simplebus1 <raspberrypi,bcm2835-vcsm> not configured [ 1.0000030] /soc/virtgpio at simplebus1 <brcm,bcm2835-virtgpio> not configurd [ 1.0000030] bcmdmac1 at simplebus3 (/scb/dma@7e007b00): DMA12 DMA13 DMA14 [ 1.0000030] bcmdmac1: WARNING: power management not supported [ 1.0000030] /scb/mailbox@7e00b840 at simplebus3 <brcm,bcm2838-vchiq> not cond [ 1.0000030] armpmu0 at simplebus0 (/arm-pmu): Performance Monitor Unit [ 1.0000030] /soc/gpiomem at simplebus1 <brcm,bcm2835-gpiomem> not configured [ 1.0000030] /scb/hevc-decoder@7eb00000 at simplebus3 <raspberrypi,argon-hevcd [ 1.0000030] /scb/argon-local-intc@7eb10000 at simplebus3 <raspberrypi,argon-d [ 1.0000030] /scb/h264-decoder@7eb20000 at simplebus3 <raspberrypi,argon-h264d [ 1.0000030] /scb/vp9-decoder@7eb30000 at simplebus3 <raspberrypi,argon-vp9-dd [ 1.0000030] simplebus0: WARNING: power management not supported [ 1.0000030] armfdt0: WARNING: power management not supported [ 1.0000030] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quali0 [ 1.0000030] cpu_boot_secondary_processors: writing mbox with 0xe [ 1.0000030] cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabd [ 1.7390717] cpu3: Cache Writeback Granule 16B, Exclusives Reservation GranulB [ 1.7490666] cpu3: Dcache line 64, Icache line 64 [ 1.7490666] cpu3: L1 48KB/64B 3-way read-allocate PIPT Instruction cache [ 1.7590669] cpu3: L1 32KB/64B 2-way write-back read-allocate write-allocate e [ 1.7690670] cpu3: L2 1024KB/64B 16-way write-back read-allocate write-allocae [ 1.7690670] cpu3: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID [ 1.7790672] cpu3: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation,d [ 1.7890681] cpu3: A72 errata #859971 present, workaround NOT enabled (U-Boot) [ 1.7990680] cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabd [ 1.8090676] cpu2: Cache Writeback Granule 16B, Exclusives Reservation GranulB [ 1.8190681] cpu2: Dcache line 64, Icache line 64 [ 1.8190681] cpu2: L1 48KB/64B 3-way read-allocate PIPT Instruction cache [ 1.8290681] cpu2: L1 32KB/64B 2-way write-back read-allocate write-allocate e [ 1.8390687] cpu2: L2 1024KB/64B 16-way write-back read-allocate write-allocae [ 1.8390687] cpu2: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID [ 1.8490686] cpu2: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation,d [ 1.8590693] cpu2: A72 errata #859971 present, workaround NOT enabled (U-Boot) [ 1.8690691] cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabd [ 1.8790695] cpu1: Cache Writeback Granule 16B, Exclusives Reservation GranulB [ 1.8890696] cpu1: Dcache line 64, Icache line 64 [ 1.8890696] cpu1: L1 48KB/64B 3-way read-allocate PIPT Instruction cache [ 1.8990700] cpu1: L1 32KB/64B 2-way write-back read-allocate write-allocate e [ 1.9090701] cpu1: L2 1024KB/64B 16-way write-back read-allocate write-allocae [ 1.9090701] cpu1: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID [ 1.9190708] cpu1: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation,d [ 1.9290706] cpu1: A72 errata #859971 present, workaround NOT enabled (U-Boot) [ 1.9390711] cpu_boot_secondary_processors: secondary processors hatched [ 1.9505940] sdhc0: SDHC 3.0, rev 153, PIO, 200000 kHz, HS 3.3V, re-tuning mos [ 1.9594801] sdmmc0 at sdhc0 slot 0 [ 1.9594801] sdhc0: WARNING: power management not supported [ 1.9594801] dwctwo0: Core Release: 2.80a (snpsid=4f54280a) [ 1.9741725] usb0 at dwctwo0: USB revision 2.0 [ 1.9794823] sdhc0: update power 7 [ 1.9894817] delay(100000) chip=54000000, param=54000000 [ 2.0894839] sdhc1: SDHC 3.0, rev 16, PIO, 100000 kHz, HS 3.3V, re-tuning mods [ 2.1094845] sdmmc1 at sdhc1 slot 0 [ 2.1094845] sdhc1: WARNING: power management not supported [ 2.1194847] sdhc0: cmd timeout error (cmd=341a) [ 2.1294850] sdmmc0: direct I/O error 60, r=6 p=0xffffffc0619f4e3c w=1 [ 2.1494855] sdhc1: update power 7 [ 2.1494855] delay(100000) chip=54000000, param=54000000 [ 2.2594879] uhub0 at usb0: NetBSD (0000) DWC2 root hub (0000), class 9/0, re1 [ 2.2694883] uhub0: 1 port with 1 removable, self powered [ 2.2694883] sdhc1: cmd timeout error (cmd=341a) [ 2.2894888] sdmmc1: direct I/O error 60, r=6 p=0xffffffc061a0ee3c w=1 [ 2.2894888] armpmu0: interrupting on GIC irq 48 [ 2.2994892] armpmu0: interrupting on GIC irq 49 [ 2.2994892] armpmu0: interrupting on GIC irq 50 [ 2.3094892] armpmu0: interrupting on GIC irq 51 [ 2.3094892] armpmu0: WARNING: power management not supported [ 2.3394904] IPsec: Initialized Security Association Processing. [ 2.3594914] sdmmc1: SD card status: 4-bit, C10, U1 [ 2.3594914] ld1 at sdmmc1: <0x1b:0x534d:EB1QT:0x30:0xe0a45778:0x128> [ 2.3694914] ld1: WARNING: power management not supported [ 2.3694914] ld1: 30528 MB, 7753 cyl, 128 head, 63 sec, 512 bytes/sect x 6252s [ 2.3875511] ld1: 4-bit width, High-Speed/SDR25, 50.000 MHz [ 2.4375517] sdmmc0: SDIO function [ 2.4375517] bwfm0 at sdmmc0 function 1 [ 2.4475528] bwfm0: WARNING: power management not supported [ 2.4475528] (manufacturer 0x2d0, product 0xa9a6) at sdmmc0 function 2 not cod [ 2.4575521] (manufacturer 0x2d0, product 0xa9a6, standard function interfaced [ 2.4775524] dwctwo0: WARNING: power management not supported [ 2.9875617] crypto: assign driver 0, flags 2 [ 2.9875617] crypto: driver 0 registers alg 1 flags 0 maxoplen 0 [ 2.9875617] crypto: driver 0 registers alg 2 flags 0 maxoplen 0 [ 3.0033616] crypto: driver 0 registers alg 3 flags 0 maxoplen 0 [ 3.0093443] crypto: driver 0 registers alg 4 flags 0 maxoplen 0 [ 3.0093443] crypto: driver 0 registers alg 5 flags 0 maxoplen 0 [ 3.0213089] crypto: driver 0 registers alg 26 flags 0 maxoplen 0 [ 3.0213089] crypto: driver 0 registers alg 27 flags 0 maxoplen 0 [ 3.0334500] crypto: driver 0 registers alg 29 flags 0 maxoplen 0 [ 3.0334500] crypto: driver 0 registers alg 33 flags 0 maxoplen 0 [ 3.0455909] crypto: driver 0 registers alg 17 flags 0 maxoplen 0 [ 3.0455909] crypto: driver 0 registers alg 6 flags 0 maxoplen 0 [ 3.0576440] crypto: driver 0 registers alg 19 flags 0 maxoplen 0 [ 3.0576440] crypto: driver 0 registers alg 7 flags 0 maxoplen 0 [ 3.0696971] crypto: driver 0 registers alg 20 flags 0 maxoplen 0 [ 3.0696971] crypto: driver 0 registers alg 15 flags 0 maxoplen 0 [ 3.0818384] crypto: driver 0 registers alg 24 flags 0 maxoplen 0 [ 3.0818384] crypto: driver 0 registers alg 25 flags 0 maxoplen 0 [ 3.0939791] crypto: driver 0 registers alg 8 flags 0 maxoplen 0 [ 3.0939791] crypto: driver 0 registers alg 21 flags 0 maxoplen 0 [ 3.1060321] crypto: driver 0 registers alg 16 flags 0 maxoplen 0 [ 3.1060321] crypto: driver 0 registers alg 9 flags 0 maxoplen 0 [ 3.1180851] crypto: driver 0 registers alg 10 flags 0 maxoplen 0 [ 3.1180851] crypto: driver 0 registers alg 13 flags 0 maxoplen 0 [ 3.1302262] crypto: driver 0 registers alg 14 flags 0 maxoplen 0 [ 3.1302262] crypto: driver 0 registers alg 28 flags 0 maxoplen 0 [ 3.1423673] crypto: driver 0 registers alg 30 flags 0 maxoplen 0 [ 3.1423673] crypto: driver 0 registers alg 31 flags 0 maxoplen 0 [ 3.1545085] crypto: driver 0 registers alg 32 flags 0 maxoplen 0 [ 3.1545085] crypto: driver 0 registers alg 11 flags 0 maxoplen 0 [ 3.1666493] crypto: driver 0 registers alg 18 flags 0 maxoplen 0 [ 3.1666493] crypto: driver 0 registers alg 23 flags 0 maxoplen 0 [ 3.1787905] crypto: driver 0 registers alg 22 flags 0 maxoplen 0 [ 3.1787905] WARNING: 4 errors while detecting hardware; check system log. [ 3.1917237] boot device: ld1 [ 3.1917237] root on ld1a dumps on ld1b [ 3.1988260] root file system type: ffs [ 3.2088272] kern.module.path=/stand/evbarm/9.99.13/modules [ 3.2088272] WARNING: no TOD clock present [ 3.2088272] WARNING: using filesystem time [ 3.2223678] WARNING: CHECK AND RESET THE DATE! [ 3.2388278] bwfm0: failed firmware_open of file brcmfmac43455-sdio.bin Thu Sep 26 21:55:03 UTC 2019 Starting root file system check: /dev/rld1a: file system is clean; not checking fdisk: Cannot determine the number of heads Not resizing /: already correct size swapctl: adding /dev/ld1b as swap device at priority 0 Starting file system checks: /dev/rld1e: 697 files, 14160 free (3540 clusters) random_seed: /var/db/entropy-file: Not present Setting tty flags. Setting sysctl variables: ddb.onpanic: 1 -> 0 Starting network. Hostname: arm64 IPv6 mode: host Configuring network interfaces:. Adding interface aliases:. Waiting for DAD to complete for statically configured addresses... Starting dhcpcd. no valid interfaces found Starting mdnsd. mDNSResponder: mDNSResponder (Engineering Build) starting mDNSResponder: Unable to parse DNS server list. Unicast DNS-SD unavailable mDNSResponder: mDNSPlatformSourceAddrForDest: connect 1.1.1.1 failed errno 49 () Building databases: dev, utmp, utmpx. wsconscfg: screen 1 is already configured wsconscfg: screen 2 is already configured wsconscfg: screen 3 is already configured [ 5.0389116] wsdisplay0: screen 4 added (default, vt100 emulation) Starting syslogd. Sep 26 21:55:05 arm64 mDNSResponder: mDNSPlatformSendUDP got error 49 (Can't as1 Mounting all file systems... Clearing temporary files. Updating fontconfig cache: done. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 Starting virecover. Checking for core dump... savecore: no core dump Starting devpubd. Starting local daemons:. Updating motd. Starting ntpd. Starting sshd. Starting postfix. Starting inetd. Starting cron. Thu Sep 26 21:55:09 UTC 2019 NetBSD/evbarm (arm64) (constty) login: root Sep 26 21:55:14 arm64 syslogd[187]: last message repeated 8 times Sep 26 21:55:14 arm64 login: ROOT LOGIN (root) on tty constty Last login: Thu Sep 26 21:53:12 2019 on constty Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. load averages: 0.11, 0.03, 0.01; up 0+00:01:02 21:55:31 17 processes: 15 sleeping, 2 on CPU CPU states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% idle Memory: 49M Act, 23M Wired, 13M Exec, 32M File, 3700M Free Swap: 128M Total, 128M Free PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND 0 root 0 0 0K 34M CPU/3 0:03 0.00% 2.69% [system] 454 root 43 0 20M 2256K CPU/0 0:00 0.00% 0.00% top 361 root 85 0 21M 23M pause/1 0:00 0.00% 0.00% ntpd 579 root 85 0 27M 4824K wait/0 0:00 0.00% 0.00% login 606 postfix 85 0 27M 4760K kqueue/1 0:00 0.00% 0.00% qmgr 598 postfix 85 0 28M 4728K kqueue/2 0:00 0.00% 0.00% pickup 380 root 85 0 24M 2916K select/0 0:00 0.00% 0.00% sshd 583 root 85 0 22M 2804K kqueue/2 0:00 0.00% 0.00% master 187 root 85 0 19M 2336K kqueue/3 0:00 0.00% 0.00% syslogd 376 root 85 0 22M 2160K nanosl/3 0:00 0.00% 0.00% ntpd 141 nobody 85 0 14M 2112K select/1 0:00 0.00% 0.00% mdnsd 588 root 85 0 16M 2096K wait/3 0:00 0.00% 0.00% sh 1 root 85 0 19M 1612K wait/3 0:00 0.00% 0.00% init 644 root 85 0 14M 1600K nanosl/3 0:00 0.00% 0.00% cron 136 root 85 0 13M 1440K kqueue/0 0:00 0.00% 0.00% dhcpcd 494 root 85 0 13M 1376K kqueue/0 0:00 0.00% 0.00% inetd arm64# sysctl hw hw.machine = evbarm hw.model = Cortex-A72 r0p3 (Cortex V8-A core) hw.ncpu = 4 hw.byteorder = 1234 hw.physmem = -148684800 hw.usermem = -172765184 hw.pagesize = 4096 hw.disknames = ld1 hw.machine_arch = aarch64 hw.alignbytes = 15 hw.cnmagic = \x2b\x2b\x2b\x2b\x2b hw.physmem64 = 4146282496 hw.usermem64 = 4122202112 hw.iostatnames = ld1 hw.ncpuonline = 4 hw.acpi.root = 0 hw.acpi.stat.gpe = 0 hw.acpi.stat.sci = 0 hw.acpi.stat.fixed = 0 hw.acpi.stat.method = 0 hw.uhso.autoswitch = 1 hw.wsdisplay.multicons = 1 hw.firmware.path = /libdata/firmware:/usr/libdata/firmware:/usr/pkg/libdata/fira hw.drm2.dp_aux_i2c_transfer_size = 16 hw.drm2.dp_aux_i2c_speed_khz = 10 hw.drm2.drm_debug = 7 hw.drm2.edid_fixup = 6 hw.drm2.drm_fbdev_emulation = 1 hw.drm2.drm_timestamp_monotonic = 1 hw.drm2.drm_timestamp_precision = 20 hw.drm2.drm_vblank_offdelay = 5000 hw.drm2.drm_kms_helper_poll = 1 hw.clk.fclock0.osc.rate = 54000000 hw.clk.fclock0.osc.parent = ? hw.clk.fclock0.osc.parent_domain = ? hw.clk.fclock1.otg.rate = 480000000 hw.clk.fclock1.otg.parent = ? hw.clk.fclock1.otg.parent_domain = ? hw.led.led0 = 0 arm64# dmesg [ 1.000000] ------------------------------------------ [ 1.000000] kern_vtopdiff = 0xffffffbfffe00000 [ 1.000000] physical_start = 0x0000000000001000 [ 1.000000] kernel_start_phys = 0x0000000000200000 [ 1.000000] kernel_end_phys = 0x0000000000fac000 [ 1.000000] msgbuf = 0x000000003bff0000 [ 1.000000] physical_end = 0x00000000fc000000 [ 1.000000] VM_MIN_KERNEL_ADDRESS = 0xffffffc000000000 [ 1.000000] kernel_start_l2 = 0xffffffc000000000 [ 1.000000] kernel_start = 0xffffffc000000000 [ 1.000000] kernel_end = 0xffffffc000dac000 [ 1.000000] pagetables = 0xffffffc000dac000 [ 1.000000] pagetables_end = 0xffffffc000dbb000 [ 1.000000] kernel_end_l2 = 0xffffffc000e00000 [ 1.000000] module_start = 0xffffffc000e00000 [ 1.000000] module_end = 0xffffffc002e00000 [ 1.000000] (kernel va area) [ 1.000000] (devmap va area) = 0xfffffffff0000000 [ 1.000000] VM_MAX_KERNEL_ADDRESS = 0xffffffffffe00000 [ 1.000000] ------------------------------------------ [ 1.000000] mpstart [ 1.000000] pool redzone disabled for 'kmem-4096' [ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 201, [ 1.000000] 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserv. [ 1.000000] NetBSD 9.99.13 (RPI4TEST64) #0: Thu Sep 26 11:24:00 UTC 2019 [ 1.000000] mlelstv@slowpoke:/home/netbsd-current/obj.evbarm64-el/s4 [ 1.000000] total memory = 3954 MB [ 1.000000] avail memory = 3812 MB [ 1.000000] pool redzone disabled for 'buf4k' [ 1.000000] pool redzone disabled for 'buf64k' [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] armfdt0 (root) [ 1.000000] simplebus0 at armfdt0: Raspberry Pi 4 Model B Rev 1.1 [ 1.000000] simplebus1 at simplebus0 (/soc) [ 1.000000] simplebus1: WARNING: power management not supported [ 1.000000] simplebus2 at simplebus0 (/clocks) [ 1.000000] simplebus2: WARNING: power management not supported [ 1.000000] simplebus3 at simplebus0 (/scb) [ 1.000000] simplebus3: WARNING: power management not supported [ 1.000000] cpus0 at simplebus0 (/cpus) [ 1.000000] cpus0: WARNING: power management not supported [ 1.000000] simplebus4 at simplebus0 (/v3dbus) [ 1.000000] simplebus4: WARNING: power management not supported [ 1.000000] simplebus5 at simplebus0 (/chosen) [ 1.000000] simplebus5: WARNING: power management not supported [ 1.000000] cpu0 at cpus0 (/cpus/cpu@0): Cortex-A72 r0p3 (Cortex V8-A core) [ 1.000000] cpu0: package 0, core 0, smt 0 [ 1.000000] cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enad [ 1.000000] cpu0: Cache Writeback Granule 16B, Exclusives Reservation GranuB [ 1.000000] cpu0: Dcache line 64, Icache line 64 [ 1.000000] cpu0: L1 48KB/64B 3-way read-allocate PIPT Instruction cache [ 1.000000] cpu0: L1 32KB/64B 2-way write-back read-allocate write-allocatee [ 1.000000] cpu0: L2 1024KB/64B 16-way write-back read-allocate write-alloce [ 1.000000] cpu0: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID [ 1.000000] cpu0: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagationd [ 1.000000] cpu0: A72 errata #859971 present, workaround NOT enabled (U-Boo) [ 1.000000] cpu0: WARNING: power management not supported [ 1.000000] cpu1 at cpus0 (/cpus/cpu@1): Cortex-A72 r0p3 (Cortex V8-A core) [ 1.000000] cpu1: package 0, core 1, smt 0 [ 1.000000] cpu1: WARNING: power management not supported [ 1.000000] cpu2 at cpus0 (/cpus/cpu@2): Cortex-A72 r0p3 (Cortex V8-A core) [ 1.000000] cpu2: package 0, core 2, smt 0 [ 1.000000] cpu2: WARNING: power management not supported [ 1.000000] cpu3 at cpus0 (/cpus/cpu@3): Cortex-A72 r0p3 (Cortex V8-A core) [ 1.000000] cpu3: package 0, core 3, smt 0 [ 1.000000] cpu3: WARNING: power management not supported [ 1.000000] simplebus6 at simplebus1 (/soc/firmware) [ 1.000000] simplebus6: WARNING: power management not supported [ 1.000000] gic0 at simplebus1 (/soc/gic400@40041000): GIC [ 1.000000] armgic0 at gic0: Generic Interrupt Controller, 256 sources (247) [ 1.000000] armgic0: Architecture version 2 (0x43b:32 rev 1) [ 1.000000] armgic0: 16 Priorities, 224 SPIs, 7 PPIs, 16 SGIs [ 1.000000] armgic0: WARNING: power management not supported [ 1.000000] gic0: WARNING: power management not supported [ 1.000000] bcmcprman0 at simplebus1 (/soc/cprman@7e101000): BCM283x Clock r [ 1.000000] bcmcprman0: WARNING: power management not supported [ 1.000000] fclock0 at simplebus2 (/clocks/clock@3): 54000000 Hz fixed cloc) [ 1.000000] fclock0: WARNING: power management not supported [ 1.000000] bcmaux0 at simplebus1 (/soc/aux@7e215000) [ 1.000000] bcmaux0: WARNING: power management not supported [ 1.000000] fclock1 at simplebus2 (/clocks/clock@4): 480000000 Hz fixed clo) [ 1.000000] fclock1: WARNING: power management not supported [ 1.000000] bcmicu0 at simplebus1 (/soc/local_intc@40000000): Multiprocessor [ 1.000000] bcmicu0: WARNING: power management not supported [ 1.000000] gtmr0 at simplebus0 (/timer): Generic Timer [ 1.000000] gtmr0: interrupting on GIC irq 27 [ 1.000000] armgtmr0 at gtmr0: Generic Timer (54000 kHz, virtual) [ 1.000000] timecounter: Timecounter "armgtmr0" frequency 54000000 Hz quali0 [ 1.000003] armgtmr0: WARNING: power management not supported [ 1.000003] gtmr0: WARNING: power management not supported [ 1.000003] gregulator0 at simplebus0 (/sd_io_1v8_reg): vdd-sd-io [ 1.000003] gregulator0: autoconfiguration error: cannot get pin 0 [ 1.000003] gregulator0: WARNING: power management not supported [ 1.000003] plcom0 at simplebus1 (/soc/serial@7e201000): ARM PL011 UART [ 1.000003] plcom0: txfifo disabled [ 1.000003] plcom0: interrupting on GIC irq 153 [ 1.000003] plcom0: WARNING: power management not supported [ 1.000003] com0 at simplebus1 (/soc/serial@7e215040): BCM AUX UART, workino [ 1.000003] com0: console [ 1.000003] com0: interrupting on GIC irq 125 [ 1.000003] com0: WARNING: power management not supported [ 1.000003] fregulator0 at simplebus0 (/fixedregulator_5v0): 5v0 [ 1.000003] fregulator0: WARNING: power management not supported [ 1.000003] fregulator1 at simplebus0 (/fixedregulator_3v3): 3v3 [ 1.000003] fregulator1: WARNING: power management not supported [ 1.000003] /soc/thermal@7d5d2200 at simplebus1 <brcm,avs-tmon-bcm2838> notd [ 1.000003] /soc/dsi@7e209000 at simplebus1 <brcm,bcm2835-dsi0> not configud [ 1.000003] bcmgpio0 at simplebus1 (/soc/gpio@7e200000): GPIO controller [ 1.000003] bcmgpio0: attach pin 0 [ 1.000003] bcmgpio0: attach pin 1 [ 1.000003] bcmgpio0: attach pin 2 [ 1.000003] bcmgpio0: attach pin 3 [ 1.000003] bcmgpio0: attach pin 4 [ 1.000003] bcmgpio0: attach pin 5 [ 1.000003] bcmgpio0: attach pin 6 [ 1.000003] bcmgpio0: attach pin 7 [ 1.000003] bcmgpio0: attach pin 8 [ 1.000003] bcmgpio0: attach pin 9 [ 1.000003] bcmgpio0: attach pin 10 [ 1.000003] bcmgpio0: attach pin 11 [ 1.000003] bcmgpio0: attach pin 12 [ 1.000003] bcmgpio0: attach pin 13 [ 1.000003] bcmgpio0: skip pin 14 - func = 2 [ 1.000003] bcmgpio0: skip pin 15 - func = 2 [ 1.000003] bcmgpio0: attach pin 16 [ 1.000003] bcmgpio0: attach pin 17 [ 1.000003] bcmgpio0: attach pin 18 [ 1.000003] bcmgpio0: attach pin 19 [ 1.000003] bcmgpio0: attach pin 20 [ 1.000003] bcmgpio0: attach pin 21 [ 1.000003] bcmgpio0: attach pin 22 [ 1.000003] bcmgpio0: attach pin 23 [ 1.000003] bcmgpio0: attach pin 24 [ 1.000003] bcmgpio0: attach pin 25 [ 1.000003] bcmgpio0: attach pin 26 [ 1.000003] bcmgpio0: attach pin 27 [ 1.000003] bcmgpio0: skip pin 28 - func = 2 [ 1.000003] bcmgpio0: skip pin 29 - func = 2 [ 1.000003] bcmgpio0: attach pin 30 [ 1.000003] bcmgpio0: attach pin 31 [ 1.000003] bcmgpio0: attach pin 32 [ 1.000003] bcmgpio0: attach pin 33 [ 1.000003] bcmgpio0: attach pin 34 [ 1.000003] bcmgpio0: attach pin 35 [ 1.000003] bcmgpio0: attach pin 36 [ 1.000003] bcmgpio0: attach pin 37 [ 1.000003] bcmgpio0: attach pin 38 [ 1.000003] bcmgpio0: attach pin 39 [ 1.000003] bcmgpio0: skip pin 40 - func = 4 [ 1.000003] bcmgpio0: skip pin 41 - func = 4 [ 1.000003] bcmgpio0: attach pin 42 [ 1.000003] bcmgpio0: attach pin 43 [ 1.000003] bcmgpio0: attach pin 44 [ 1.000003] bcmgpio0: attach pin 45 [ 1.000003] bcmgpio0: attach pin 46 [ 1.000003] bcmgpio0: attach pin 47 [ 1.000003] bcmgpio0: attach pin 48 [ 1.000003] bcmgpio0: attach pin 49 [ 1.000003] bcmgpio0: attach pin 50 [ 1.000003] bcmgpio0: attach pin 51 [ 1.000003] bcmgpio0: attach pin 52 [ 1.000003] bcmgpio0: attach pin 53 [ 1.000003] bcmgpio0: pins 0..31 interrupting on GIC irq 145 [ 1.000003] bcmgpio0: pins 32..54 interrupting on GIC irq 146 [ 1.000003] pinctrl: set config pinctrl-0 for /soc/serial@7e201000 [ 1.000003] pinctrl: set config pinctrl-0 for /soc/serial@7e215040 [ 1.000003] pinctrl: set config pinctrl-0 for /soc/mmcnr@7e300000 [ 1.000003] gpio0 at bcmgpio0: 54 pins [ 1.000003] bcmgpio0: WARNING: power management not supported [ 1.000003] bcmdmac0 at simplebus1 (/soc/dma@7e007000): DMA0 DMA2 DMA4 DMA54 [ 1.000003] bcmdmac0: WARNING: power management not supported [ 1.000003] /soc/power at simplebus1 <raspberrypi,bcm2835-power> not configd [ 1.000003] /phy at simplebus0 <usb-nop-xceiv> not configured [ 1.000003] bcmmbox0 at simplebus1 (/soc/mailbox@7e00b880): VC mailbox [ 1.000003] bcmmbox0: interrupting on GIC irq 65 [ 1.000003] vcmbox0 at bcmmbox0 [ 1.000003] vcmbox0: WARNING: power management not supported [ 1.000003] bcmmbox0: WARNING: power management not supported [ 1.000003] bcmpmwdog0 at simplebus1 (/soc/watchdog@7e100000): Power manager [ 1.000003] bcmpmwdog0: WARNING: power management not supported [ 1.000003] /scb/pcie@7d500000 at simplebus3 <brcm,bcm7211-pcie> <brcm,bcm7d [ 1.000003] /scb/genet@7d580000 at simplebus3 <brcm,genet-v5> not configured [ 1.000003] bcm2838rng0 at simplebus1 (/soc/rng@7e104000): Hardware RNG [ 1.000003] bcm2838rng0: WARNING: power management not supported [ 1.000003] sdhc0 at simplebus1 (/soc/mmcnr@7e300000): SDHC controller [ 1.000003] sdhc0: ref freq 200000 kHz [ 1.000003] sdhc0: interrupting on GIC irq 158 [ 1.000003] autoconfiguration error: : failed to decode interrupt [ 1.000003] gpioleds0 at simplebus0 (/leds): led0 [ 1.000003] gpioleds0: WARNING: power management not supported [ 1.000003] /soc/firmware/gpio at simplebus6 <raspberrypi,firmware-gpio> nod [ 1.000003] dwctwo0 at simplebus1 (/soc/usb@7e980000): USB controller [ 1.000003] dwctwo0: interrupting on GIC irq 105 [ 1.000003] sdhc1 at simplebus1 (/soc/emmc2@7e340000): SDHC controller [ 1.000003] sdhc1: ref freq 100000 kHz [ 1.000003] sdhc1: interrupting on GIC irq 158 [ 1.000003] genfb0 at simplebus1 (/soc/fb)rpi_fb_init: addr = 0xfe876000 si0 [ 1.000003] rpi_fb_init: depth = 32 [ 1.000003] rpi_fb_init: pitch = 5120 [ 1.000003] rpi_fb_init: width = 1280 height = 720 [ 1.000003] rpi_fb_init: vwidth = 1280 vheight = 720 [ 1.000003] genfb0: framebuffer at 0xfe876000, size 1280x720, depth 32, str0 [ 1.000003] wsdisplay0 at genfb0 kbdmux 1 [ 1.000003] wsmux1: connecting to wsdisplay0 [ 1.000003] wsdisplay0: screen 0-3 added (default, vt100 emulation) [ 1.000003] /soc/vcsm at simplebus1 <raspberrypi,bcm2835-vcsm> not configurd [ 1.000003] /soc/virtgpio at simplebus1 <brcm,bcm2835-virtgpio> not configud [ 1.000003] bcmdmac1 at simplebus3 (/scb/dma@7e007b00): DMA12 DMA13 DMA14 [ 1.000003] bcmdmac1: WARNING: power management not supported [ 1.000003] /scb/mailbox@7e00b840 at simplebus3 <brcm,bcm2838-vchiq> not cod [ 1.000003] armpmu0 at simplebus0 (/arm-pmu): Performance Monitor Unit [ 1.000003] /soc/gpiomem at simplebus1 <brcm,bcm2835-gpiomem> not configured [ 1.000003] /scb/hevc-decoder@7eb00000 at simplebus3 <raspberrypi,argon-hevd [ 1.000003] /scb/argon-local-intc@7eb10000 at simplebus3 <raspberrypi,argond [ 1.000003] /scb/h264-decoder@7eb20000 at simplebus3 <raspberrypi,argon-h26d [ 1.000003] /scb/vp9-decoder@7eb30000 at simplebus3 <raspberrypi,argon-vp9-d [ 1.000003] simplebus0: WARNING: power management not supported [ 1.000003] armfdt0: WARNING: power management not supported [ 1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz qual0 [ 1.000003] cpu_boot_secondary_processors: writing mbox with 0xe [ 1.000003] cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enad [ 1.739072] cpu3: Cache Writeback Granule 16B, Exclusives Reservation GranuB [ 1.749067] cpu3: Dcache line 64, Icache line 64 [ 1.749067] cpu3: L1 48KB/64B 3-way read-allocate PIPT Instruction cache [ 1.759067] cpu3: L1 32KB/64B 2-way write-back read-allocate write-allocatee [ 1.769067] cpu3: L2 1024KB/64B 16-way write-back read-allocate write-alloce [ 1.769067] cpu3: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID [ 1.779067] cpu3: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagationd [ 1.789068] cpu3: A72 errata #859971 present, workaround NOT enabled (U-Boo) [ 1.799068] cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enad [ 1.809068] cpu2: Cache Writeback Granule 16B, Exclusives Reservation GranuB [ 1.819068] cpu2: Dcache line 64, Icache line 64 [ 1.819068] cpu2: L1 48KB/64B 3-way read-allocate PIPT Instruction cache [ 1.829068] cpu2: L1 32KB/64B 2-way write-back read-allocate write-allocatee [ 1.839069] cpu2: L2 1024KB/64B 16-way write-back read-allocate write-alloce [ 1.839069] cpu2: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID [ 1.849069] cpu2: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagationd [ 1.859069] cpu2: A72 errata #859971 present, workaround NOT enabled (U-Boo) [ 1.869069] cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enad [ 1.879069] cpu1: Cache Writeback Granule 16B, Exclusives Reservation GranuB [ 1.889070] cpu1: Dcache line 64, Icache line 64 [ 1.889070] cpu1: L1 48KB/64B 3-way read-allocate PIPT Instruction cache [ 1.899070] cpu1: L1 32KB/64B 2-way write-back read-allocate write-allocatee [ 1.909070] cpu1: L2 1024KB/64B 16-way write-back read-allocate write-alloce [ 1.909070] cpu1: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID [ 1.919071] cpu1: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagationd [ 1.929071] cpu1: A72 errata #859971 present, workaround NOT enabled (U-Boo) [ 1.939071] cpu_boot_secondary_processors: secondary processors hatched [ 1.950594] sdhc0: SDHC 3.0, rev 153, PIO, 200000 kHz, HS 3.3V, re-tuning ms [ 1.959480] sdmmc0 at sdhc0 slot 0 [ 1.959480] sdhc0: WARNING: power management not supported [ 1.959480] dwctwo0: Core Release: 2.80a (snpsid=4f54280a) [ 1.974172] usb0 at dwctwo0: USB revision 2.0 [ 1.979482] sdhc0: update power 7 [ 1.989482] delay(100000) chip=54000000, param=54000000 [ 2.089484] sdhc1: SDHC 3.0, rev 16, PIO, 100000 kHz, HS 3.3V, re-tuning mos [ 2.109484] sdmmc1 at sdhc1 slot 0 [ 2.109484] sdhc1: WARNING: power management not supported [ 2.119485] sdhc0: cmd timeout error (cmd=341a) [ 2.129485] sdmmc0: autoconfiguration error: direct I/O error 60, r=6 p=0xf1 [ 2.149485] sdhc1: update power 7 [ 2.149485] delay(100000) chip=54000000, param=54000000 [ 2.259488] uhub0 at usb0: NetBSD (0000) DWC2 root hub (0000), class 9/0, r1 [ 2.269488] uhub0: 1 port with 1 removable, self powered [ 2.269488] sdhc1: cmd timeout error (cmd=341a) [ 2.289489] sdmmc1: autoconfiguration error: direct I/O error 60, r=6 p=0xf1 [ 2.289489] armpmu0: interrupting on GIC irq 48 [ 2.299489] armpmu0: interrupting on GIC irq 49 [ 2.299489] armpmu0: interrupting on GIC irq 50 [ 2.309489] armpmu0: interrupting on GIC irq 51 [ 2.309489] armpmu0: WARNING: power management not supported [ 2.339490] IPsec: Initialized Security Association Processing. [ 2.359491] sdmmc1: SD card status: 4-bit, C10, U1 [ 2.359491] ld1 at sdmmc1: <0x1b:0x534d:EB1QT:0x30:0xe0a45778:0x128> [ 2.369491] ld1: WARNING: power management not supported [ 2.369491] ld1: 30528 MB, 7753 cyl, 128 head, 63 sec, 512 bytes/sect x 625s [ 2.387551] ld1: 4-bit width, High-Speed/SDR25, 50.000 MHz [ 2.437552] sdmmc0: SDIO function [ 2.437552] bwfm0 at sdmmc0 function 1 [ 2.447553] bwfm0: WARNING: power management not supported [ 2.447553] (manufacturer 0x2d0, product 0xa9a6) at sdmmc0 function 2 not cd [ 2.457552] (manufacturer 0x2d0, product 0xa9a6, standard function interfacd [ 2.477552] dwctwo0: WARNING: power management not supported [ 2.987562] crypto: assign driver 0, flags 2 [ 2.987562] crypto: driver 0 registers alg 1 flags 0 maxoplen 0 [ 2.987562] crypto: driver 0 registers alg 2 flags 0 maxoplen 0 [ 3.003362] crypto: driver 0 registers alg 3 flags 0 maxoplen 0 [ 3.009344] crypto: driver 0 registers alg 4 flags 0 maxoplen 0 [ 3.009344] crypto: driver 0 registers alg 5 flags 0 maxoplen 0 [ 3.021309] crypto: driver 0 registers alg 26 flags 0 maxoplen 0 [ 3.021309] crypto: driver 0 registers alg 27 flags 0 maxoplen 0 [ 3.033450] crypto: driver 0 registers alg 29 flags 0 maxoplen 0 [ 3.033450] crypto: driver 0 registers alg 33 flags 0 maxoplen 0 [ 3.045591] crypto: driver 0 registers alg 17 flags 0 maxoplen 0 [ 3.045591] crypto: driver 0 registers alg 6 flags 0 maxoplen 0 [ 3.057644] crypto: driver 0 registers alg 19 flags 0 maxoplen 0 [ 3.057644] crypto: driver 0 registers alg 7 flags 0 maxoplen 0 [ 3.069697] crypto: driver 0 registers alg 20 flags 0 maxoplen 0 [ 3.069697] crypto: driver 0 registers alg 15 flags 0 maxoplen 0 [ 3.081838] crypto: driver 0 registers alg 24 flags 0 maxoplen 0 [ 3.081838] crypto: driver 0 registers alg 25 flags 0 maxoplen 0 [ 3.093979] crypto: driver 0 registers alg 8 flags 0 maxoplen 0 [ 3.093979] crypto: driver 0 registers alg 21 flags 0 maxoplen 0 [ 3.106032] crypto: driver 0 registers alg 16 flags 0 maxoplen 0 [ 3.106032] crypto: driver 0 registers alg 9 flags 0 maxoplen 0 [ 3.118085] crypto: driver 0 registers alg 10 flags 0 maxoplen 0 [ 3.118085] crypto: driver 0 registers alg 13 flags 0 maxoplen 0 [ 3.130226] crypto: driver 0 registers alg 14 flags 0 maxoplen 0 [ 3.130226] crypto: driver 0 registers alg 28 flags 0 maxoplen 0 [ 3.142367] crypto: driver 0 registers alg 30 flags 0 maxoplen 0 [ 3.142367] crypto: driver 0 registers alg 31 flags 0 maxoplen 0 [ 3.154508] crypto: driver 0 registers alg 32 flags 0 maxoplen 0 [ 3.154508] crypto: driver 0 registers alg 11 flags 0 maxoplen 0 [ 3.166649] crypto: driver 0 registers alg 18 flags 0 maxoplen 0 [ 3.166649] crypto: driver 0 registers alg 23 flags 0 maxoplen 0 [ 3.178790] crypto: driver 0 registers alg 22 flags 0 maxoplen 0 [ 3.178790] WARNING: 4 errors while detecting hardware; check system log. [ 3.191724] boot device: ld1 [ 3.191724] root on ld1a dumps on ld1b [ 3.198826] root file system type: ffs [ 3.208827] kern.module.path=/stand/evbarm/9.99.13/modules [ 3.208827] WARNING: no TOD clock present [ 3.208827] WARNING: using filesystem time [ 3.222368] WARNING: CHECK AND RESET THE DATE! [ 3.238828] bwfm0: failed firmware_open of file brcmfmac43455-sdio.bin [ 5.038912] wsdisplay0: screen 4 added (default, vt100 emulation) arm64# ifconfig lo0: flags=0x8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33624 inet6 ::1/128 flags 0x20<NODAD> inet6 fe80::1%lo0/64 flags 0x0 scopeid 0x1 inet 127.0.0.1/8 flags 0x0 arm64# --- end cold boot ----- --- begin reboot ---- arm64# reboot Sep 26 22:01:40 arm64 reboot: rebooted by root Sep 26 22:01:40 arm64 syslogd[187]: Exiting on signal 15 [ 407.2964397] syncing disks... done [ 407.3064400] unmounting file systems... [ 407.3164405] unmounted tmpfs on /var/shm type tmpfs [ 407.3264405] unmounted procfs on /proc type procfs [ 407.3464410] unmounted ptyfs on /dev/pts type ptyfs [ 407.3564413] unmounted kernfs on /kern type kernfs [ 407.3664416] unmounted /dev/ld1e on /boot type msdos [ 407.5664461] unmounted /dev/ld1a on / type ffs [ 407.5764465] unmounting done [ 407.5764465] Shutting down devices: shutting down bwfm0, skipped. shutting do. [ 407.7264499] boot NetBSD/aarch64 PC = 0000000000200838 SP = 0000000000df6000 CurrentEL = 0000000000000002 SCTLR_EL2 = 0000000030c50830 HCR_EL2 = 0000000000000000 SPSR_EL1 = 0000000000000010 CNTFREQ_EL0 = 000000000337f980 SCTLR_EL1 = 0000000000c50838 MIDR_EL1 = 00000000410fd083 MPIDR_EL1 = 0000000080000000 ID_AA64MPFR0_EL1 = 0000000000002222 ID_AA64MPFR1_EL1 = 0000000000000000 ID_AA64ISAR0_EL1 = 0000000000010000 ID_AA64ISAR1_EL1 = 0000000000000000 ID_AA64MMFR0_EL1 = 0000000000001124 ID_AA64MMFR1_EL1 = 0000000000000000 Drop to EL1...OK CurrentEL = 0000000000000001 Creating VA=PA tables (0x00000000-0xffffffff) Creating VA=PA tables for kernel image Creating VA=PA tables for FDT Creating KVA=PA tables OK MMU Enable...OK SPSR_EL1 = 0000000000000010 DAIF = 0000000000000000 vstart = ffffffc000001898 PC = ffffffc000001898 SP(lwp0,kvm) = ffffffc000bf5ed0 curcpu = ffffffc000a28b00 initarm [ 1.0000000] FDT<0x2eff5f00> [ 1.0000000] cpufunc [ 1.0000000] devmap [ 1.0000000] pmap_devmap_bootstrap: [ 1.0000000] devmap: pa fe000000-feffffff = va fffffffff7000000 [ 1.0000000] devmap: pa ff800000-ff9fffff = va fffffffff6800000 [ 1.0000000] devmap: pa 00000000-00000fff = va fffffffff0000000 [ 1.0000000] bootstrap [ 1.0000000] bcm283x_bootparams: memory size 1006632960 [ 1.0000000] bcm283x_bootparams: arm clock 1500000000 [ 1.0000000] bcm283x_bootparams: vpu clock 432000000 [ 1.0000000] bcm283x_bootparams: emmc clock 200000000 [ 1.0000000] bcm283x_bootparams: firmware rev 5d39ecad [ 1.0000000] bcm283x_bootparams: board model 0 [ 1.0000000] bcm283x_bootparams: mac-address 57e92132a6dc [ 1.0000000] bcm283x_bootparams: board rev c03111 [ 1.0000000] bcm283x_bootparams: board serial 10000000fca20bfc [ 1.0000000] bcm283x_bootparams: DMA channel mask 0x000071f5 [ 1.0000000] bcm283x_bootparams: cmdline bcm2708_fb.fbwidth=656 bcm2708_x [ 1.0000000] stdout [ 1.0000000] consinit ok [ 1.0000000] uboot: args 0x2eff5f00, 0, 0, 0 [ 1.0000000] NetBSD/evbarm (fdt) booting ... [ 1.0000000] FDT /memory [0] @ 0x0 size 0x3c000000 [ 1.0000000] FDT /memory [1] @ 0x40000000 size 0xbc000000 [ 1.0000000] initarm: memory start 0 end fc000000 (len fc000000) [ 1.0000000] initarm: fdt_build_bootconfig [ 1.0000000] Usable memory: [ 1.0000000] 1000 - 3bffffff [ 1.0000000] 40000000 - fbffffff [ 1.0000000] Creating KSEG tables for 0000000000001000-00000000001fffff (L3) [ 1.0000000] Creating KSEG tables for 0000000000200000-000000003bffffff (L2) [ 1.0000000] Creating KSEG tables for 0000000040000000-00000000bfffffff (L1) [ 1.0000000] Creating KSEG tables for 00000000c0000000-00000000fbffffff (L2) [ 1.0000000] write protect 0xffffffc000000000 .. 0xffffffc000a00000 [ 1.0000000] va ffffffc000000000 -> pa 0000000000fac000 -> l0 ffff000000fac000 [ 1.0000000] panic: Trap: Data Abort (EL1): Translation Fault L0 with read ac] [ 1.0000000] cpu0: Begin traceback... [ 1.0000000] trace fp ffffffc000bf5a80 [ 1.0000000] fp ffffffc000bf5aa0 ?() at ffffffc0004af3e0 [ 1.0000000] fp ffffffc000bf5b00 ?() at ffffffc0004af4b0 [ 1.0000000] fp ffffffc000bf5b90 ?() at ffffffc00007a0ac [ 1.0000000] tf ffffffc000bf5c10 ?() at ffffffc0000772ec [ 1.0000000] ---- trapframe 0xffffffc000bf5c10 (304 bytes) ---- [ 1.0000000] pc=ffffffc00007f538, spsr=0000000060000005 [ 1.0000000] esr=0000000096000004, far=ffff000000facff8 [ 1.0000000] x0=00000000000001ff, x1=0000000000000000 [ 1.0000000] x2=0000000000000000, x3=0000000000000008 [ 1.0000000] x4=0000000000000003, x5=ffffffc0000720d8 [ 1.0000000] x6=0000000000000007, x7=0000000000000078 [ 1.0000000] x8=0000000000000000, x9=00000000fffffff8 [ 1.0000000] x10=ffffffc000bf5af0, x11=ffffffc000bf5af0 [ 1.0000000] x12=ffffffc000c38928, x13=000000003c000000 [ 1.0000000] x14=0000000000000564, x15=ffffffc000bf5d8c [ 1.0000000] x16=0000f3edfa4f95a8, x17=0000f3edfa358594 [ 1.0000000] x18=ffffffc000c38928, x19=ffffffc000000000 [ 1.0000000] x20=0000000000000000, x21=ffffffc0006e9f88 [ 1.0000000] x22=ffffffc000a00000, x23=0000000000000002 [ 1.0000000] x24=0000000000000000, x25=0000000040000000 [ 1.0000000] x26=ffff000000fac000, x27=0000000000000002 [ 1.0000000] x28=ffffffc000cb8000, fp=x29=ffffffc000bf5d40 [ 1.0000000] lr=x30=ffffffc00007f534, sp=ffffffc000bf5d40 [ 1.0000000] ------------------------------------------------ [ 1.0000000] fp ffffffc000bf5d40 ?() at ffffffc00007f538 [ 1.0000000] fp ffffffc000bf5d90 ?() at ffffffc000075168 [ 1.0000000] fp ffffffc000bf5e30 ?() at ffffffc00000bed0 [ 1.0000000] fp 0000000000000000 ?() at ffffffc00000194c [ 1.0000000] cpu0: End traceback... Stopped in pid 0.1 (system) at ffffffc000077410: ret db{0}> --- end reboot ---- Regards Klaus |