Port-arm archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Pinebook - Emma does not show up
All,
I ordered a new eMMC drive (64Gig) for my new Pinebook 1080p. It came in and I installed it; however, when I boot from the Pinebook image downloaded from invisible.ca the new drive does not show up. I don't think it's hardware since I was able install the Pinebook KDE image without a problem.
I checked /var/log/messages and dmesg for errors:
pineverbs$ grep -i error /var/log/messages
Jun 6 14:11:02 pineverbs /netbsd: [ 1.0000090] sunxii2s0 at simplebus1autoconfiguration error: : couldn't get dma channel "tx"
Jun 6 14:11:02 pineverbs /netbsd: [ 1.0000090] autoconfiguration error: : couldn't setup channels
Jun 6 14:11:02 pineverbs /netbsd: [ 1.0000090] sunxidrm0: autoconfiguration error: failed to activate endpoint: 19
Jun 6 14:11:02 pineverbs /netbsd: [ 1.0000090] ausoc0: autoconfiguration error: couldn't acquire cpu dai on sound node
Jun 6 14:11:02 pineverbs /netbsd: [ 2.9994883] sdmmc2: autoconfiguration error: switch error
Jun 6 14:11:02 pineverbs /netbsd: [ 2.9994883] sdmmc2: autoconfiguration error: can't change high speed 2, error 22
Jun 6 14:11:02 pineverbs /netbsd: [ 3.0302000] sdmmc2: autoconfiguration error: mem init failed
Jun 6 14:11:02 pineverbs /netbsd: [ 3.0302000] sdmmc2: autoconfiguration error: init failed
Jun 6 14:11:02 pineverbs /netbsd: [ 9.2114999] WARNING: 8 errors while detecting hardware; check system log.
Jun 6 14:11:04 pineverbs ntpd[356]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized
Jun 6 14:11:04 pineverbs ntpd[356]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized
pineverbs$ dmesg | grep mmc
[ 1.000009] mmcpwrseq0 at simplebus0: Simple MMC power sequence provider
[ 1.000009] sunximmc0 at simplebus1: SD/MMC controller
[ 1.000009] sunximmc0: interrupting on GIC irq 92
[ 1.000009] sunximmc1 at simplebus1: SD/MMC controller
[ 1.000009] sunximmc1: interrupting on GIC irq 93
[ 1.000009] sunximmc2 at simplebus1: SD/MMC controller
[ 1.000009] sunximmc2: interrupting on GIC irq 94
[ 2.515597] sdmmc0 at sunximmc0
[ 2.515597] sdmmc1 at sunximmc1
[ 2.525618] sdmmc2 at sunximmc2
[ 2.999488] sdmmc2: autoconfiguration error: switch error
[ 2.999488] sdmmc2: autoconfiguration error: can't change high speed 2, error 22
[ 3.030200] sdmmc2: autoconfiguration error: mem init failed
[ 3.030200] sdmmc2: autoconfiguration error: init failed
[ 3.050202] (manufacturer 0x24c, product 0xb703, standard function interface code 0x7) at sdmmc1 function 1 not configured
[ 3.064798] sdmmc0: SD card status: 4-bit, C4
[ 3.070202] ld0 at sdmmc0: <0x03:0x5344:SS16G:0x80:0x42ce3d51:0x122>
pineverbs$ dmesg
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.000000] 2018, 2019 The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All rights reserved.
[ 1.000000] NetBSD 8.99.42 (GENERIC64) #0: Wed Jun 5 07:22:49 UTC 2019
[ 1.000000] mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/evbarm/compile/GENERIC64
[ 1.000000] total memory = 2026 MB
[ 1.000000] avail memory = 1953 MB
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] armfdt0 (root)
[ 1.000000] simplebus0 at armfdt0: Pinebook
[ 1.000000] simplebus1 at simplebus0
[ 1.000000] cpus0 at simplebus0
[ 1.000000] simplebus2 at simplebus0
[ 1.000000] cpu0 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
[ 1.000000] cpu0: package 0, core 0, smt 0
[ 1.000000] cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
[ 1.000000] cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
[ 1.000000] cpu0: Dcache line 64, Icache line 64
[ 1.000000] cpu0: L1 32KB/64B 2-way read-allocate VIPT Instruction cache
[ 1.000000] cpu0: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache
[ 1.000000] cpu0: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
[ 1.000000] cpu0: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
[ 1.000000] cpu0: auxID=0x11120, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
[ 1.000000] cpufreqdt0 at cpu0
[ 1.000000] cpu1 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
[ 1.000000] cpu1: package 0, core 1, smt 0
[ 1.000000] cpu2 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
[ 1.000000] cpu2: package 0, core 2, smt 0
[ 1.000000] cpu3 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
[ 1.000000] cpu3: package 0, core 3, smt 0
[ 1.000000] gic0 at simplebus1: GIC
[ 1.000000] armgic0 at gic0: Generic Interrupt Controller, 224 sources (215 valid)
[ 1.000000] armgic0: 16 Priorities, 192 SPIs, 7 PPIs, 16 SGIs
[ 1.000000] sunxisramc0 at simplebus1: SRAM Controller
[ 1.000000] sunxisramc0: area: SRAM C
[ 1.000000] fclock0 at simplebus0: 24000000 Hz fixed clock (osc24M)
[ 1.000000] fclock1 at simplebus0: 32768 Hz fixed clock (ext-osc32k)
[ 1.000000] gtmr0 at simplebus0: Generic Timer
[ 1.000000] gtmr0: interrupting on GIC irq 27
[ 1.000000] armgtmr0 at gtmr0: ARM Generic Timer (24000 kHz)
[ 1.000000] timecounter: Timecounter "armgtmr0" frequency 24000000 Hz quality 500
[ 1.000009] sun50ia64ccu0 at simplebus1: A64 CCU
[ 1.000009] sun50ia64rccu0 at simplebus1: A64 PRCM CCU
[ 1.000009] sunxinmi0 at simplebus1: R_INTC
[ 1.000009] sunxigpio0 at simplebus1: PIO
[ 1.000009] gpio0 at sunxigpio0: 103 pins
[ 1.000009] sunxigpio0: interrupting on GIC irq 43
[ 1.000009] sunxigpio1 at simplebus1: PIO
[ 1.000009] gpio1 at sunxigpio1: 13 pins
[ 1.000009] sunxigpio1: interrupting on GIC irq 77
[ 1.000009] sunxipwm0 at simplebus1: PWM
[ 1.000009] sunxide2bus0 at simplebus1: DE2 Bus
[ 1.000009] sunxirsb0 at simplebus1: RSB
[ 1.000009] sunxirsb0: interrupting on GIC irq 71
[ 1.000009] iic0 at sunxirsb0: I2C bus
[ 1.000009] axppmic0 at iic0 addr 0x3a3: AXP803
[ 1.000009] axpreg0 at axppmic0: vcc-hdmi
[ 1.000009] axpreg1 at axppmic0: vcc-edp
[ 1.000009] axpreg2 at axppmic0: avdd-csi
[ 1.000009] axpreg3 at axppmic0: vcc-wifi
[ 1.000009] axpreg4 at axppmic0: cpvdd
[ 1.000009] axpreg5 at axppmic0: eldo2
[ 1.000009] axpreg6 at axppmic0: vdd-1v8-csi
[ 1.000009] axpreg7 at axppmic0: vcc-1v2-hsic
[ 1.000009] axpreg8 at axppmic0: vdd-cpus
[ 1.000009] axpreg9 at axppmic0: vcc-3v3
[ 1.000009] axpreg10 at axppmic0: vdd-cpux
[ 1.000009] axpreg11 at axppmic0: dcdc3
[ 1.000009] axpreg12 at axppmic0: dcdc4
[ 1.000009] axpreg13 at axppmic0: vcc-dram
[ 1.000009] axpreg14 at axppmic0: vdd-sys
[ 1.000009] axpreg15 at axppmic0: vcc-csi
[ 1.000009] axpreg16 at axppmic0: vcc-pl
[ 1.000009] axpreg17 at axppmic0: vcc-pll-avcc
[ 1.000009] fregulator0 at simplebus0: bl-3v3
[ 1.000009] sunxisid0 at simplebus1: Security ID EFUSE
[ 1.000009] com0 at simplebus1: ns16550a, working fifo
[ 1.000009] com0: console
[ 1.000009] com0: interrupting on GIC irq 32
[ 1.000009] com1 at simplebus1: ns16550a, working fifo
[ 1.000009] com1: interrupting on GIC irq 33
[ 1.000009] fregulator1 at simplebus0: vcc3v3
[ 1.000009] sunxide2ccu0 at sunxide2bus0: DE2 CCU
[ 1.000009] sunxidrm0 at simplebus0: Display Engine Pipeline
[ 1.000009] sunxiusbphy0 at simplebus1: USB PHY
[ 1.000009] sunxihdmiphy0 at simplebus1: HDMI PHY
[ 1.000009] sunximixer0 at sunxide2bus0: Display Engine Mixer
[ 1.000009] sunximixer1 at sunxide2bus0: Display Engine Mixer
[ 1.000009] ausoc0 at simplebus0: SUN50I Audio Card
[ 1.000009] a64acodec0 at simplebus1: A64 Audio Codec (analog part)
[ 1.000009] sunxii2s0 at simplebus1autoconfiguration error: : couldn't get dma channel "tx"
[ 1.000009] autoconfiguration error: : couldn't setup channels
[ 1.000009] sun8icodec0 at simplebus1: Audio Codec
[ 1.000009] sun8icodec0: interrupting on GIC irq 60
[ 1.000009] sunxilcdc0 at simplebus1: TCON0
[ 1.000009] sunxilcdc0 port 0 endpoint 0 connected to sunximixer0 port 1 endpoint 0
[ 1.000009] sunxilcdc0: interrupting on GIC irq 118
[ 1.000009] sunxilcdc1 at simplebus1: TCON1
[ 1.000009] sunxilcdc1 port 0 endpoint 0 connected to sunximixer1 port 1 endpoint 0
[ 1.000009] sunxilcdc1: interrupting on GIC irq 119
[ 1.000009] sunxitwi0 at simplebus1: Marvell TWSI controller
[ 1.000009] sunxitwi0: interrupting on GIC irq 76
[ 1.000009] iic1 at sunxitwi0: I2C bus
[ 1.000009] anxedp0 at iic1 addr 0x38: eDP TX
[ 1.000009] anxedp0 port 0 endpoint 0 connected to sunxilcdc0 port 1 endpoint 0
[ 1.000009] mmcpwrseq0 at simplebus0: Simple MMC power sequence provider
[ 1.000009] /soc/rtc@1f00000 at simplebus1 not configured
[ 1.000009] sun6idma0 at simplebus1: DMA controller (8 channels)
[ 1.000009] sun6idma0: interrupting on GIC irq 82
[ 1.000009] sunximmc0 at simplebus1: SD/MMC controller
[ 1.000009] sunximmc0: interrupting on GIC irq 92
[ 1.000009] sunximmc1 at simplebus1: SD/MMC controller
[ 1.000009] sunximmc1: interrupting on GIC irq 93
[ 1.000009] sunximmc2 at simplebus1: SD/MMC controller
[ 1.000009] sunximmc2: interrupting on GIC irq 94
[ 1.000009] ehci0 at simplebus1: EHCI
[ 1.000009] ehci0: interrupting on GIC irq 104
[ 1.000009] ehci0: EHCI version 1.0
[ 1.000009] ehci0: 1 companion controller, 1 port
[ 1.000009] usb0 at ehci0: USB revision 2.0
[ 1.000009] ohci0 at simplebus1: OHCI
[ 1.000009] ohci0: interrupting on GIC irq 105
[ 1.000009] ohci0: OHCI version 1.0
[ 1.000009] usb1 at ohci0: USB revision 1.0
[ 1.000009] ehci1 at simplebus1: EHCI
[ 1.000009] ehci1: interrupting on GIC irq 106
[ 1.000009] ehci1: EHCI version 1.0
[ 1.000009] ehci1: 1 companion controller, 1 port
[ 1.000009] usb2 at ehci1: USB revision 2.0
[ 1.000009] ohci1 at simplebus1: OHCI
[ 1.000009] ohci1: interrupting on GIC irq 107
[ 1.000009] ohci1: OHCI version 1.0
[ 1.000009] usb3 at ohci1: USB revision 1.0
[ 1.000009] /soc/gpu@1c40000 at simplebus1 not configured
[ 1.000009] sunxiwdt0 at simplebus1: Watchdog
[ 1.000009] sunxiwdt0: default watchdog period is 16 seconds
[ 1.000009] sunxithermal0 at simplebus1: Thermal sensor controller
[ 1.000009] sunxithermal0: interrupting on GIC irq 63
[ 1.000009] sunxithermal0: cpu: alarm 85C hyst 58C shut 106C
[ 1.000009] sunxithermal0: gpu1: alarm 85C hyst 58C shut 106C
[ 1.000009] sunxithermal0: gpu2: alarm 85C hyst 58C shut 106C
[ 1.000009] pwmbacklight0 at simplebus0: PWM Backlight <0 5 10 15 20 30 40 55 70 85 100>
[ 1.000009] /audio-amplifier at simplebus0 not configured
[ 1.000009] armpmu0 at simplebus0: Performance Monitor Unit
[ 1.000009] psci0 at simplebus0: PSCI 1.1
[ 1.000009] gpiokeys0 at simplebus0: Lid Switch
[ 1.000009] /soc/video-codec@1c0e000 at simplebus1 not configured
[ 1.000009] sunximixer0: activating port 1 endpoint 0 (direct)
[ 1.000009] sunxilcdc0: activating port 0 endpoint 0
[ 1.000009] anxedp0: activating port 0 endpoint 0
[ 1.000009] sunximixer1: activating port 1 endpoint 0 (direct)
[ 1.000009] sunxilcdc1: activating port 0 endpoint 0
[ 1.000009] sunxidrm0: autoconfiguration error: failed to activate endpoint: 19
[ 1.000009] sunxifb0 at sunxidrm0
[ 1.000009] sunxifb0: framebuffer at 0xffffffc043000000, size 1920x1080, depth 32, stride 7680
[ 1.000009] sunxilcdc0: no CH0 PLL configured
[ 1.000009] wsdisplay0 at sunxifb0 kbdmux 1: console (default, vt100 emulation)
[ 1.000009] wsmux1: connecting to wsdisplay0
[ 1.000009] wsdisplay0: screen 1-3 added (default, vt100 emulation)
[ 1.000009] kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.000009] kern info: [drm] No driver support for vblank timestamp query.
[ 1.000009] sunxidrm0: initialized sunxi 1.0.0 20190123 on minor 0
[ 1.000009] ausoc0: autoconfiguration error: couldn't acquire cpu dai on sound node
[ 1.000009] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 1.000009] cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
[ 1.676476] cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
[ 1.706476] cpu2: Dcache line 64, Icache line 64
[ 1.726476] cpu2: L1 32KB/64B 2-way read-allocate VIPT Instruction cache
[ 1.756478] cpu2: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache
[ 1.786478] cpu2: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
[ 1.826479] cpu2: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
[ 1.856480] cpu2: auxID=0x11120, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
[ 1.916481] cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
[ 1.946481] cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
[ 1.976482] cpu3: Dcache line 64, Icache line 64
[ 2.006483] cpu3: L1 32KB/64B 2-way read-allocate VIPT Instruction cache
[ 2.036484] cpu3: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache
[ 2.066484] cpu3: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
[ 2.106485] cpu3: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
[ 2.136486] cpu3: auxID=0x11120, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
[ 2.196488] cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
[ 2.236488] cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
[ 2.266489] cpu1: Dcache line 64, Icache line 64
[ 2.296490] cpu1: L1 32KB/64B 2-way read-allocate VIPT Instruction cache
[ 2.326490] cpu1: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache
[ 2.366491] cpu1: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
[ 2.406492] cpu1: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
[ 2.436493] cpu1: auxID=0x11120, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
[ 2.515597] cpufreqdt0: 1152.000 MHz, 1300000 uV
[ 2.515597] cpufreqdt0: 1104.000 MHz, 1260000 uV
[ 2.515597] cpufreqdt0: 1008.000 MHz, 1200000 uV
[ 2.515597] cpufreqdt0: 816.000 MHz, 1080000 uV
[ 2.515597] cpufreqdt0: 648.000 MHz, 1040000 uV
[ 2.515597] cpufreqdt0: 408.000 MHz, 1000000 uV
[ 2.515597] sdmmc0 at sunximmc0
[ 2.515597] sdmmc1 at sunximmc1
[ 2.525618] sdmmc2 at sunximmc2
[ 2.883205] uhub0 at usb1: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[ 2.893206] uhub0: 1 port with 1 removable, self powered
[ 2.903206] uhub1 at usb0: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
[ 2.913206] uhub1: 1 port with 1 removable, self powered
[ 2.913206] armpmu0: interrupting on GIC irq 184
[ 2.913206] armpmu0: interrupting on GIC irq 185
[ 2.933207] armpmu0: interrupting on GIC irq 186
[ 2.933207] armpmu0: interrupting on GIC irq 187
[ 2.943207] uhub2 at usb3: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
[ 2.953207] uhub2: 1 port with 1 removable, self powered
[ 2.963208] uhub3 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
[ 2.963208] uhub3: 1 port with 1 removable, self powered
[ 2.999488] sdmmc2: autoconfiguration error: switch error
[ 2.999488] sdmmc2: autoconfiguration error: can't change high speed 2, error 22
[ 3.030200] sdmmc2: autoconfiguration error: mem init failed
[ 3.030200] sdmmc2: autoconfiguration error: init failed
[ 3.050202] (manufacturer 0x24c, product 0xb703, standard function interface code 0x7) at sdmmc1 function 1 not configured
[ 3.064798] sdmmc0: SD card status: 4-bit, C4
[ 3.070202] ld0 at sdmmc0: <0x03:0x5344:SS16G:0x80:0x42ce3d51:0x122>
[ 3.070202] ld0: 15193 MB, 7717 cyl, 64 head, 63 sec, 512 bytes/sect x 31116288 sectors
[ 3.097840] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
[ 3.141383] Lid Switch: lid opened.
[ 3.171384] IPsec: Initialized Security Association Processing.
[ 5.221422] uhub4 at uhub3 port 1: vendor 05e3 (0x5e3) USB2.0 Hub (0x608), class 9/0, rev 2.00/88.32, addr 2
[ 5.231422] uhub4: single transaction translator
[ 5.251424] uhub4: 4 ports with 1 removable, self powered
[ 6.571448] uhidev0 at uhub4 port 1 configuration 1 interface 0
[ 6.581448] uhidev0: HAILUCK CO.,LTD (0x258a) USB KEYBOARD (0x0c), rev 1.10/1.00, addr 3, iclass 3/1
[ 6.611450] ukbd0 at uhidev0: 8 Variable keys, 6 Array codes
[ 7.021456] wskbd0 at ukbd0: console keyboard, using wsdisplay0
[ 7.021456] uhidev1 at uhub4 port 1 configuration 1 interface 1
[ 7.031457] uhidev1: HAILUCK CO.,LTD (0x258a) USB KEYBOARD (0x0c), rev 1.10/1.00, addr 3, iclass 3/0
[ 7.061458] uhidev1: 9 report ids
[ 7.071458] ums0 at uhidev1 reportid 1: 5 buttons, W and Z dirs
[ 7.071458] wsmouse0 at ums0 mux 0
[ 7.081458] uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
[ 7.081458] uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
[ 7.091458] uhid2 at uhidev1 reportid 5: input=0, output=0, feature=5
[ 7.101458] uhid3 at uhidev1 reportid 6: input=0, output=0, feature=1039
[ 7.101458] uhid4 at uhidev1 reportid 9: input=1, output=0, feature=0
[ 8.071477] ure0 at uhub4 port 2
[ 8.081477] ure0: CMI (0xbda) USB 10/100 LAN (0x8152), rev 2.10/20.00, addr 4
[ 8.101479] ure0: RTL8152 ver 4c10
[ 8.161479] ure0: Ethernet address 70:88:6b:81:0b:75
[ 8.181480] rlphy0 at ure0 phy 0: RTL8201E 10/100 media interface, rev. 2
[ 8.201480] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[ 9.181499] uvideo0 at uhub4 port 3 configuration 1 interface 0: Generic (0x1908) USB2.0 PC CAMERA (0x2311), rev 2.00/1.00, addr 5
[ 9.201500] video0 at uvideo0: Generic (0x1908) USB2.0 PC CAMERA (0x2311), rev 2.00/1.00, addr 5
[ 9.211500] WARNING: 8 errors while detecting hardware; check system log.
[ 9.221500] boot device: ld0
[ 9.241502] root on ld0a dumps on ld0b
[ 9.251501] root file system type: ffs
[ 9.261501] kern.module.path=/stand/evbarm/8.99.42/modules
[ 9.261501] WARNING: no TOD clock present
[ 9.271501] WARNING: using filesystem time
[ 9.278240] WARNING: CHECK AND RESET THE DATE!
[ 16.621825] wsdisplay0: screen 4 added (default, vt100 emulation)
[ 33.142540] axppmic0: normal capacity on 'charge state'
Ron Georgia
“90% of my problems are due to ignorance, the other 10% is because I just don’t know any better.”
Home |
Main Index |
Thread Index |
Old Index