NetBSD on RPI2

[Nick Hudson <skrll%netbsd.org@localhost>]

Hi,

Today I committed support the RPI2 running with 1 processor only. 
Everything that works on RPI is working on RPI2 - dmesg below.

Nick


NetBSD/evbarm (rpi) booting ...
[ Kernel symbol table missing! ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.5 (RPI2) #19: Wed Mar  4 23:00:41 GMT 2015
nick@kenny:/u/obj/evbearmv7hf-el/usr/src/sys/arch/evbarm/compile/RPI2
total memory = 944 MB
avail memory = 929 MB
sysctl_createv: sysctl_create(machine_arch) returned 17
mainbus0 (root)
cpu0 at mainbus0 core 0: 600 MHz Cortex-A7 r0p5 (Cortex V7A core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: 32KB/32B 2-way L1 VIPT Instruction cache
cpu0: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
cpu0: 512KB/64B 8-way write-through L2 PIPT Unified cache
vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
cpu1 at mainbus0 core 1: disabled (unresponsive)
cpu2 at mainbus0 core 2: disabled (unresponsive)
cpu3 at mainbus0 core 3: disabled (unresponsive)
obio0 at mainbus0
bcmicu0 at obio0
armgtmr0 at obio0: ARMv7 Generic 64-bit Timer (19200 kHz)
armgtmr0: interrupting on irq 99
bcmmbox0 at obio0 intr 65: VC mailbox
vcmbox0 at bcmmbox0
vchiq0 at obio0 intr 66: BCM2835 VCHIQ
bcmpm0 at obio0: Power management, Reset and Watchdog controller
bcmdmac0 at obio0: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 DMA10
bcmrng0 at obio0: RNG
plcom0 at obio0 intr 57
plcom0: txfifo disabled
plcom0: console
genfb0 at obio0
wsdisplay0 at genfb0 kbdmux 1
sdhc0 at obio0 intr 62: SDHC controller
sdhc0: interrupting on intr 62
dwctwo0 at obio0 intr 9: USB controller
bcmspi0 at obio0 intr 54: SPI
spi0 at bcmspi0: SPI bus
bsciic0 at obio0 intr 53: BSC0
iic0 at bsciic0: I2C bus
bsciic1 at obio0 intr 53: BSC1
iic1 at bsciic1: I2C bus
bcmgpio0 at obio0: GPIO [0...31]
gpio0 at bcmgpio0: 32 pins
bcmgpio1 at obio0: GPIO [32...53]
gpio1 at bcmgpio1: 22 pins
usb0 at dwctwo0: USB revision 2.0
sdhc0: SD Host Specification 3.0, rev.153
sdhc0: using DMA transfer
sdmmc0 at sdhc0 slot 0
uhub0 at usb0: vendor 0000 DWC2 root hub, class 9/0, rev 2.00/1.00, addr 1
ld0 at sdmmc0: <0x03:0x5344:SL08G:0x80:0x0bcb2d39:0x08a>
ld0: 7580 MB, 3850 cyl, 64 head, 63 sec, 512 bytes/sect x 15523840 sectors
ld0: 4-bit width, bus clock 50.000 MHz
uhub1 at uhub0 port 1: vendor 0424 product 9514, class 9/0, rev 
2.00/2.00, addr 2
uhub1: multiple transaction translators
usmsc0 at uhub1 port 1
usmsc0: vendor 0424 product ec00, rev 2.00/2.00, addr 3
usmsc0: Ethernet address b8:27:eb:13:82:0f
ukphy0 at usmsc0 phy 1: OUI 0x00800f, model 0x000c, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
kern.module.path=/stand/evbarm/7.99.5/modules
vchiq: local ver 6 (min 3), remote ver 6.
vcaudio0 at vchiq0: auds
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
audio0 at vcaudio0: half duplex, playback, capture, independent
Fri Jan 30 05:52:08 UTC 2015
Starting root file system check:
/dev/rld0a: file system is clean; not checking
swapctl: adding /dev/ld0b as swap device at priority 0
Starting file system checks:
/dev/rld0e: 15 files, 35672 free (8918 clusters)
random_seed: /var/db/entropy-file: Not present
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
Hostname: rpi2
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:.
Waiting for DAD completion for statically configured addresses...
Starting dhcpcd.
Building databases: dev, dev, utmp, utmpx.
wsconscfg: screen 1 is already configured
wsconscfg: screen 2 is already configured
wsconscfg: screen 3 is already configured
Starting syslogd.
Mounting all file systems...
Clearing temporary files.
Updating fontconfig cache: done.
Creating a.out runtime link editor directory cache.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting devpubd.
Starting local daemons:.
Updating motd.
Starting sshd.
Could not load host key: /etc/ssh/ssh_host_ed25519_key
Starting inetd.
Starting cron.
Fri Jan 30 05:52:35 UTC 2015

NetBSD/evbarm (rpi2) (console)

login: root
Jan 30 05:52:47 rpi2 login: ROOT LOGIN (root) on tty console
Last login: Fri Jan 30 05:51:52 2015 on console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.5 (RPI2) #19: Wed Mar 4 23:00:41 GMT 2015

Welcome to NetBSD!

This system is running a beta release of the NetBSD operating system, aimed
at stabilizing the next formal release.  It is close to formal release 
quality,
but may still contain bugs, even serious ones.  Please bear this in mind and
use the system with care.

You are encouraged to test this version as thoroughly as possible. 
Should you
encounter any problem, please report it back to the development team 
using the
send-pr(1) utility (requires a working MTA).  If yours is not properly 
set up,
use the web interface at: http://www.NetBSD.org/support/send-pr.html

Thank you for helping us test and improve this beta NetBSD release.

You have new mail.
Terminal type is vt100.
We recommend that you create a non-root account and use su(1) for root 
access.
rpi2# openssl speed md5
WARNING: can't open config file: /etc/openssl/openssl.cnf
Doing md5 for 3s on 16 size blocks: 201737 md5's in 3.02s
Doing md5 for 3s on 64 size blocks: 187065 md5's in 2.97s
Doing md5 for 3s on 256 size blocks: 153812 md5's in 3.00s
Doing md5 for 3s on 1024 size blocks: 88586 md5's in 3.00s
Doing md5 for 3s on 8192 size blocks: 18037 md5's in 3.00s
OpenSSL 1.0.1k 8 Jan 2015
NetBSD 7.99.5
options:bn(32,32) md2(int) rc4(ptr,int) des(idx,cisc,2,long) 
aes(partial) idea(int) blowfish(idx)
gcc version 4.8.4 (NetBSD nb2 20150115)
The 'numbers' are in 1000s of bytes per second processed.
type             16 bytes     64 bytes    256 bytes   1024 bytes 8192 bytes
md5               1068.81k     4031.03k    13125.29k    30237.35k 49253.03k
rpi2#