Port-arm archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: iMX6
Hello,
Here is my dmesg :
$ /sbin/dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.1 (NITROGEN6X) #6: Tue Oct 28 18:40:30 CET 2014
root@schroedinger:/home/bertrand/netbsd/obj/sys/arch/evbarm/compile/NITROGEN6X
total memory = 1024 MB
avail memory = 1007 MB
sysctl_createv: sysctl_create(machine_arch) returned 17
kern.module.path=/stand/evbarm/7.99.1/modules
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0 core 0: 792 MHz Cortex-A9 r3p10 (Cortex V7A core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: isar: [0]=0x101111 [1]=0x13112111 [2]=0x21232041 [3]=0x11112131,
[4]=0x11142, [5]=0
cpu0: mmfr: [0]=0x100103 [1]=0x20000000 [2]=0x1230000 [3]=0x102111
cpu0: pfr: [0]=0x1231 [1]=0x11
cpu0: 32KB/32B 4-way L1 VIPT Instruction cache
cpu0: 32KB/32B 4-way write-back-locking-C L1 PIPT Data cache
cpu0: 1024KB/32B 16-way write-back-locking-D L2 PIPT Unified cache
vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
vfp0: mvfr: [0]=0x10110222 [1]=0x1111111
cpu1 at mainbus0 core 1
cpu2 at mainbus0 core 2
cpu3 at mainbus0 core 3
armperiph0 at mainbus0
arml2cc0 at armperiph0: ARM PL310 r3p1a L2 Cache Controller (disabled)
arml2cc0: cache enabled
armgic0 at armperiph0: Generic Interrupt Controller, 160 sources (149 valid)
armgic0: 32 Priorities, 128 SPIs, 5 PPIs, 16 SGIs
a9tmr0 at armperiph0: A9 Global 64-bit Timer (396 MHz)
a9tmr0: interrupting on irq 27
axi0 at mainbus0: Advanced eXtensible Interface
imxccm0 at axi0 addr 0x20c4000: Clock Control Module
imxccm0: PLL_ARM clock=792000000
imxccm0: PLL_SYS clock=528000000
imxccm0: PLL_USB1 clock=480000000
imxccm0: PLL_USB2 clock=480000000
imxccm0: PLL_AUDIO clock=36000000
imxccm0: PLL_VIDEO clock=72000000
imxccm0: PLL_ENET clock=50000000
imxccm0: PLL_MLB clock=480000000
imxccm0: IMX6CLK_PLL2_PFD0=352000000
imxccm0: IMX6CLK_PLL2_PFD1=594000000
imxccm0: IMX6CLK_PLL2_PFD2=396000000
imxccm0: IMX6CLK_PLL3_PFD0=720000000
imxccm0: IMX6CLK_PLL3_PFD1=454736842
imxccm0: IMX6CLK_PLL3_PFD2=508235294
imxccm0: IMX6CLK_PLL3_PFD3=454736842
imxccm0: IMX6CLK_ARM_ROOT=792000000
imxccm0: IMX6CLK_PERIPH=528000000
imxccm0: IMX6CLK_AHB=132000000
imxccm0: IMX6CLK_IPG=66000000
imxccm0: IMX6CLK_AXI=264000000
imxccm0: IMX6CLK_USDHC1=198000000
imxccm0: IMX6CLK_USDHC2=198000000
imxccm0: IMX6CLK_USDHC3=198000000
imxccm0: IMX6CLK_USDHC4=198000000
imxocotp0 at axi0 addr 0x21bc000: On-Chip OTP Controller
imxocotp0: OCOTP_VERSION 2.0.0
imxgpio0 at axi0 addr 0x209c000 intr 98 irqbase 256: interrupts 256..287
imxgpio1 at axi0 addr 0x20a0000 intr 100 irqbase 288: interrupts 288..319
imxgpio2 at axi0 addr 0x20a4000 intr 102 irqbase 320: interrupts 320..351
imxgpio3 at axi0 addr 0x20a8000 intr 104 irqbase 352: interrupts 352..383
imxgpio4 at axi0 addr 0x20ac000 intr 106 irqbase 384: interrupts 384..415
imxgpio5 at axi0 addr 0x20b0000 intr 108 irqbase 416: interrupts 416..447
imxgpio6 at axi0 addr 0x20b4000 intr 110 irqbase 448: interrupts 448..479
imxiomux0 at axi0 addr 0x20e0000: IOMUX Controller
imxuart0 at axi0 addr 0x2020000 intr 58
imxuart0: console
imxuart1 at axi0 addr 0x21e8000 intr 59
ahcisata0 at axi0 addr 0x2200000 intr 71: AHCI Controller
ahcisata0: AHCI revision 1.30, 1 port, 32 slots, CAP
0x6f26ff80<CCCS,PSC,SSC,PMD,SPM,SAM,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ>
atabus0 at ahcisata0 channel 0
imxwdog0 at axi0 addr 0x20bc000 intr 112: i.MX Watchdog Timer, default
period is 10 seconds
enet0 at axi0 addr 0x2188000 intr 150: Gigabit Ethernet Controller
enet0: Ethernet address 00:30:d6:10:4b:ee
ukphy0 at enet0 phy 0: OUI 0x0010a1, model 0x0022, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
imxusbc0 at axi0 addr 0x2184000: Universal Serial Bus Controller
ehci0 at imxusbc0 unit 0 intr 75: i.MX USB Controller
ehci0: id=5 revision=1 HCI revision=0x100
ehci0: 1 host port, device capable, 8 endpoints
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
ehci1 at imxusbc0 unit 1 intr 72: i.MX USB Controller
ehci1: id=5 revision=1 HCI revision=0x100
ehci1: 1 host port
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
imxsnvs0 at axi0 addr 0x20cc000: Secure Non-Volatile Storage
imxsnvs0: id=0x3e, ver=1.0, ip_era=0x0, intg_opt=0x0, eco_rev=0x0,
config_opt=0x0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "a9tmr0" frequency 396000000 Hz quality 500
cpu_boot_secondary_processors: writing mbox with 0xe
cpu_hatch(cpu2): cpu_hatch(cpu3): cpu_hatch(cpu1): vectors vectors
vbar=0x80bda1a0 vbar=0x80bda1a0 vectors stacks vbar=0x80bda1a0 stacks
tlb tlbcpu3cpu2 stacks: 792 MHz Cortex-A9 r3p10 (Cortex V7A core)
: 792 MHz Cortex-A9 r3p10 (Cortex V7A core)
cpu3: tlb DC enabledcpu1cpu2:: 792 MHz Cortex-A9 r3p10 (Cortex V7A core)
DC enabledcpu1: IC enabled WB disabled DC enabled IC enabled EABT IC
enabled branch prediction enabled WB disabled WB disabled
EABT EABT branch prediction enabled branch prediction enabledcpu2:
isar: [0]=0x101111 [1]=0x13112111 [2]=0x21232041 [3]=0x11112131,
[4]=0x11142, [5]=0
cpu2: mmfr: [0]=0x100103 [1]=0x20000000 [2]=0x1230000 [3]=0x102111
cpu2: pfr: [0]=0x1231 [1]=0x11
cpu1: isar: [0]=0x101111 [1]=0x13112111 [2]=0x21232041 [3]=0x11112131,
[4]=0x11142, [5]=0
cpu2: 32KB/32B 4-way L1 VIPT Instruction cache
cpu3: isar: [0]=0x101111 [1]=0x13112111 [2]=0x21232041 [3]=0x11112131,
[4]=0x11142, [5]=0
cpu2: 32KB/32B 4-way write-back-locking-C L1 PIPT Data cache
cpu2: 1024KB/32B 16-way write-back-locking-D L2 PIPT Unified cache
cpu1: mmfr: [0]=0x100103 [1]=0x20000000 [2]=0x1230000 [3]=0x102111
cpu3: mmfr: [0]=0x100103 [1]=0x20000000 [2]=0x1230000 [3]=0x102111
cpu3: pfr: [0]=0x1231 [1]=0x11
vfpcpu1: pfr: [0]=0x1231 [1]=0x11
cpu3: 32KB/32B 4-way L1 VIPT Instruction cache
cpu3: 32KB/32B 4-way write-back-locking-C L1 PIPT Data cache
vfp2 at cpu2: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
cpu1: 32KB/32B 4-way L1 VIPT Instruction cache
vfp2: mvfr: [0]=0x10110222 [1]=0x1111111
cpu1: 32KB/32B 4-way write-back-locking-C L1 PIPT Data cache
cpu3: 1024KB/32B 16-way write-back-locking-D L2 PIPT Unified cache
interrupts vfp md(0x80954948)cpu1: 1024KB/32B 16-way
write-back-locking-D L2 PIPT Unified cache
vfp3 at cpu3: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
done!
vfp3: mvfr: [0]=0x10110222 [1]=0x1111111
vfp interruptsvfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN
propagation, denormals
md(0x80954948)vfp1: mvfr: [0]=0x10110222 [1]=0x1111111
done!
interrupts md(0x80954948) done!
gpio0 at imxgpio0: 32 pins
gpio1 at imxgpio1: 32 pins
gpio2 at imxgpio2: 32 pins
gpio3 at imxgpio3: 32 pins
gpio4 at imxgpio4: 32 pins
gpio5 at imxgpio5: 32 pins
gpio6 at imxgpio6: 32 pins
uhub0 at usb1: i.MX EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1 at usb0: i.MX EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 1 port with 1 removable, self powered
IPsec: Initialized Security Association Processing.
WARNING: module error: can't find builtin dependency `iic'
WARNING: module error: can't find builtin dependency `au8522'
WARNING: module error: can't find builtin dependency `iic'
WARNING: module error: can't find builtin dependency `iic'
WARNING: module error: can't find builtin dependency `iic'
WARNING: module error: can't find builtin dependency `iic'
uhub2 at uhub0 port 1: SMSC product 2517, class 9/0, rev 2.00/0.02, addr 2
uhub2: multiple transaction translators
uhub2: 7 ports with 7 removable, self powered
Kernelized RAIDframe activated
boot device: <unknown>
root on enet0
nfs_boot: trying static
nfs_boot: client_addr=192.168.150.3
nfs_boot: gateway=192.168.150.1
nfs_boot: netmask=255.255.255.0
nfs_boot: server=192.168.150.1
nfs_boot: root=192.168.150.1:/home/bertrand/netbsd/obj/destdir.evbarm
enet0: link state UP (was UNKNOWN)
root on 192.168.150.1:/home/bertrand/netbsd/obj/destdir.evbarm
root time: 0x54476845
WARNING: clock gained 6 days
warning: no /dev/console
init: copying out path `/sbin/init' 11
Kernel RNG "kernel" long run test FAILURE: Run of 32 0s found
cprng kernel: failed statistical RNG test
Kernel RNG "kernel" runs test FAILURE: too many runs of 1 1s (2699 > 2685)
cprng kernel: failed statistical RNG test
192.168.150.1:/home/bertrand/netbsd/obj/destdir.evbarm: inaccurate wcc
data (ctime) detected, disabling wcc (ctime 1414518132.482584095
1414518132.482584095, mtime 1414518132.482584095 1414518132.482584095)
Board is a Q7 iMX-6 made by MSC
(http://www.msc-technologies.eu/support/boards/qseven/msc-q7-imx6.html),
that has 2 GB of RAM but only 1 GB is now usable.
netbsd.ub is not bootable, only netbsd.bin runs as expected.
Do you know if HDMI/LVDS outputs are supported ?
Best regards,
JKB
Home |
Main Index |
Thread Index |
Old Index