Re: Panic at init on arm (Seagate Dockstar) with -current

[Ignatios Souvatzis <is%netbsd.org@localhost>]

Hi All,

that's as far as I get with a SHEEVAPLUG kernel dropped in instead of the 
5.99.44 one. Sources are from about 12 hours ago.
I'm building a kernel with root on sd0a now.

Regards,
        -is


NetBSD 6.99.14 (SHEEVAPLUG) #0: Sat Oct 27 15:06:12 CEST 2012
        
is@henrietta:/var/itch/sources/cur/obj.evbarm/sys/arch/evbarm/compile/SHEEVAPLUG
total memory = 128 MB
avail memory = 120 MB
cprng kernel: WARNING insufficient entropy at creation.
mainbus0 (root)
cpu0 at mainbus0 core 0: Sheeva 88SV131 rev 1 (ARM9E-S core)
cpu0: DC enabled IC enabled WB enabled EABT branch prediction enabled
cpu0: 16KB/32B 4-way L1 Instruction cache
cpu0: 16KB/32B 4-way write-back-locking-C L1 Data cache
mvsoc0 at mainbus0: Marvell 88F6281 Rev. A0  Kirkwood
mvsoc0: CPU Clock 1200.000 MHz  SysClock 400.000 MHz  TClock 200.000 MHz
mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff: Marvell SoC Timer
mvsocgpp at mvsoc0 unit 0 not configured
mvsocrtc0 at mvsoc0 unit 0 offset 0x10300-0x10317: Marvell SoC Real Time Clock
com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 33: ns16550a, working fifo
com0: console
com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 34: ns16550a, working fifo
ehci0 at mvsoc0 unit 0 offset 0x50000-0x51fff irq 19: Marvell USB 2.0 Interface
usb0 at ehci0: USB revision 2.0
gtidmac0 at mvsoc0 unit 0 offset 0x60000-0x60fff: Marvell IDMA Controller/XOR 
Engine
gtidmac0: XOR Engine 4 channels, intr 5...8
gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x110ff irq 29: Marvell TWSI controller
iic0 at gttwsi0: I2C bus
mvcesa0 at mvsoc0 unit 0 offset 0x30000-0x3ffff irq 22: Marvell Cryptographic 
Engines and Security Accelerator
mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit Ethernet 
Controller
mvgbe0 at mvgbec0 port 0 irq 11
mvgbe0: Ethernet address 00:10:75:1a:d3:f4
makphy0 at mvgbe0 phy 0: Marvell 88E1116R Gigabit PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
mvgbec1 at mvsoc0 unit 1 offset 0x74000-0x77fff: Marvell Gigabit Ethernet 
Controller
mvgbe at mvgbec1 port 0 not configured
mvpex at mvsoc0 unit 0 not configured
mvsata at mvsoc0 unit 0 not configured
mvsdio0 at mvsoc0 unit 0 offset 0x90000-0x9ffff irq 28: Marvell Secure Digital 
Input/Output Interface
sdmmc0 at mvsdio0
uhub0 at usb0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1 at uhub0 port 1: Genesys Logic USB2.0 Hub, class 9/0, rev 2.00/6.03, addr 
2
uhub1: single transaction translator
umass0 at uhub1 port 4 configuration 1 interface 0
umass0: Phison Electronics Corp. product 0x3600, rev 2.00/1.00, addr 3
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <, , DL03> disk removable
sd0: fabricating a geometry
sd0: 3824 MB, 3824 cyl, 64 head, 32 sec, 512 bytes/sect x 7831552 sectors
sd0: fabricating a geometry
cprng sysctl: WARNING insufficient entropy at creation.
boot device: <unknown>
root device: