-current on OPENRD doesn't boot

[SAITOH Masanobu <msaitoh%execsw.org@localhost>]

 Hi.

 My OPEN-RD with latest -current have not booted since 2 days ago.

> NetBSD 6.99.11 (OPENRD) #10: Sun Sep 16 20:20:05 JST 2012
>         
> msaitoh%tap.execsw.org@localhost:/var/sources/NetBSD-current/src/sys/arch/evbarm/compile/OPENRD
> total memory = 512 MB
> avail memory = 497 MB
> cprng kernel: WARNING insufficient entropy at creation.
> mainbus0 (root)
> cpu0 at mainbus0 core 0: Sheeva 88SV131 rev 1 (ARM9E-S core)
> cpu0: DC enabled IC enabled WB enabled EABT branch prediction enabled
> cpu0: 16KB/32B 4-way L1 Instruction cache
> cpu0: 16KB/32B 4-way write-back-locking-C L1 Data cache
> mvsoc0 at mainbus0: Marvell 88F6281 Rev. A0  Kirkwood
> mvsoc0: CPU Clock 1200.000 MHz  SysClock 400.000 MHz  TClock 200.000 MHz
> mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff: Marvell SoC Timer
> mvsocgpp at mvsoc0 unit 0 not configured
> mvsocrtc0 at mvsoc0 unit 0 offset 0x10300-0x10317: Marvell SoC Real Time Clock
> com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 33: ns16550a, working fifo
> com0: console
> com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 34: ns16550a, working fifo
> ehci0 at mvsoc0 unit 0 offset 0x50000-0x51fff irq 19: Marvell USB 2.0 
> Interface
> usb0 at ehci0: USB revision 2.0
> gtidmac0 at mvsoc0 unit 0 offset 0x60000-0x60fff: Marvell IDMA Controller/XOR 
> Engine
> gtidmac0: XOR Engine 4 channels, intr 5...8
> gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x110ff irq 29: Marvell TWSI 
> controller
> iic0 at gttwsi0: I2C bus
> mvcesa0 at mvsoc0 unit 0 offset 0x30000-0x3ffff irq 22: Marvell Cryptographic 
> Engines and Security Accelerator
> mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit Ethernet 
> Controller
> mvgbe0 at mvgbec0 port 0 irq 11
> mvgbe0: Ethernet address 00:50:43:01:a2:c6
> makphy0 at mvgbe0 phy 8: Marvell 88E1116R Gigabit PHY, rev. 0
> makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
> 1000baseT-FDX, auto
> mvgbec1 at mvsoc0 unit 1 offset 0x74000-0x77fff: Marvell Gigabit Ethernet 
> Controller
> mvgbe1 at mvgbec1 port 0 irq 15
> mvgbe1: Ethernet address 00:50:43:01:a2:c7
> makphy1 at mvgbe1 phy 24: Marvell 88E1116R Gigabit PHY, rev. 0
> makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
> 1000baseT-FDX, auto
> mvpex at mvsoc0 unit 0 not configured
> mvsata0 at mvsoc0 unit 0 offset 0x80000-0x87fff irq 21: Marvell Serial-ATA 
> Host Controller (SATAHC)
> mvsata0: GenIIe, 1hc, 2port/hc
> atabus0 at mvsata0 channel 0
> atabus1 at mvsata0 channel 1
> mvsdio at mvsoc0 unit 0 not configured
> uhub0 at usb0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> mvsata0 port 1: device present, speed: 1.5Gb/s
> wd0 at atabus1 drive 0
> wd0: <ST9160821AS>
> wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
> uhub1 at uhub0 port 1: Standard Microsystems product 0x2517, class 9/0, rev 
> 2.00/0.01, addr 2
> uhub1: multiple transaction translators
> cprng sysctl: WARNING insufficient entropy at creation.
> boot device: <unknown>
> root device: wd0
> dump device (default wd0b):
> file system (default generic): ffs
> root on wd0a dumps on wd0b
> Mutex error: mutex_vector_enter: locking against myself
> 
> lock address : 0x00000000c29ca09c
> current cpu  :                  0
> current lwp  : 0x00000000c2a4fd20
> owner field  : 0x0000000001000600 wait/spin:                0/1



-- 
-----------------------------------------------
                SAITOH Masanobu (msaitoh%execsw.org@localhost
                                 msaitoh%netbsd.org@localhost)