Re: amigappc test kernel for CSPPC and BPPC

[RadosÅaw Kujawa <radoslaw.kujawa%c0ff33.net@localhost>]

On Dec 12, 2010, at 9:17 PM, Frank Wille wrote:

> It could be interesting if Radek finds some time to test your modifications
> and disables the last two options just to see what happens. I see no reason
> why it should work differently on a CSPPC than on a BPPC once you have your
> pmap allocations in Fast RAM.

I'll look into it tomorrow! I successfully booted GENERIC with Jukka's patches.

> 
>> Also it looks like cpuclock/busclock calculation is a bit off.
>> This one should have 200Mhz processor instead of 233Mhz.
> 
> Have a look at the pll603[] array in amigappc_identify(). There is probably
> a wrong entry for your CPU.


Something's certainly wrong there, I've got a 0 MHz CPU ;).

I had to use a serial console, as gobsdppc starts 15kHz video mode which my 
monitor does not like (even if I use aga option), but I could only receive 
data, I couldn't type anything. Serial port tested was with AmigaOS, works just 
fine.

$ sudo cu --line /dev/tty.usbserial -s 9600 --parity=none --nostop
Connected.
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.41 (GENERIC) #1: Sun Dec 12 22:50:18 CET 2010
        
rkujawa%Radoslaw-Kujawas-MacBook-Pro.local@localhost:/Users/rkujawa/repos/NetBSD-current/src/sys/arch/amigappc/compile/obj/GENERIC
Model: Amiga 1200 [BlizzardPPC] (603ev v2.1 0 MHz, busclk 60 MHz)
total memory = 127 MB
avail memory = 119 MB
mainbus0 (root)
cpu0 at mainbus0: 603ev (Revision 2.1), ID 0 (primary)
cpu0: HID0 0x90c000<DOZE,DPM,ICE,DCE>, powersave: 1
ser0 at mainbus0: input fifo 512 output fifo 32
par0 at mainbus0
kbd0 at mainbus0: CIA A type Amiga
ms0 at mainbus0
grfcc0 at mainbus0
grf0 at grfcc0: width 640 height 400 colors 4
ite0 at grf0: rows 50 cols 80 repeat at (30/100)s next at (10/100)s has keyboard
fdc0 at mainbus0: dmabuf pa 0x1e1c84: dmabuf ka 0x1e1c84
fd0 at fdc0 unit 0: 3.5dd 80 cyl, 2 head, 11 sec [9 sec], 512 bytes/sec
wdc0 at mainbus0
atabus0 at wdc0 channel 0
pccard0 at mainbus0
pcmcia0 at pccard0
ne0 at pcmcia0 function 0: <TAMARACK, Ethernet, A, 004743118001>
ne0: Ethernet address 00:00:21:2f:6c:ee
aucc0 at mainbus0
audio0 at aucc0: half duplex, playback, capture
zbus0 at mainbus0
board at zbus0: pa 0xf00c38 man/pro 8512/110 not configured
biomask 800001e netmask 800001e ttymask 800001e
wd0 at atabus0 drive 0: <SanDisk SDCFH2-004G>
wd0: 3919 MB, 7964 cyl, 16 head, 63 sec, 512 bytes/sect x 8027712 sectors
4 views configured
root device (default wd0a): 

--
Best regards,
RadosÅaw Kujawa