Re: Large disks with gpt on amd64

[Torsten Harenberg <harenberg%physik.uni-wuppertal.de@localhost>]

Hi Joerg,

thanks a lot for your quick help, which worked perfectly..

I'm facing another problem now.

With this live cd, after I gpt'ed, newfs'ed, ...  my ~10 TB file system, 
the system get a hard reset a few seconds after I mounted it. Nothing is 
printed on the root console.

So I installed NetBSD properly on the machine, which consists of a

p400 raid controller (136 GB, recognized as "sd0" by sysinst) and a
p800 raid controller (with 4x10TB, recognized as "sd1".."sd4" by sysinst).

Obviously I wanted to install to the 136 GB device which I did.

sysinst finished without problems, but after re-booting, the boot loader 
seems not to find the partitions created anymore (I created one 136 GB 
partition on "sd0", and disklabeled it with a ~100 GB "/" - sd0a - and 
some swap as sd0b).

Messages are like:

booting hd0a:netbsd - starting in 0
open netbsd: bad partition
....
....
....

Trying to give him something like
dev sd0a:
boot netbsd

gives

open netbsd: Device not configured
boot: sd0a:netbsd: Device not configured

I attached the dmesg of kernel used by the system installer.

Can anybody help me to get it booting?

Thanks a lot!

  Torsten


--
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
<>                                                              <>
<> Dr. Torsten Harenberg     harenberg%physik.uni-wuppertal.de@localhost  <>
<> Bergische Universitaet                                       <>
<> FB C - Physik             Tel.: +49 (0)202 439-3521          <>
<> Gaussstr. 20              Fax : +49 (0)202 439-2811          <>
<> 42097 Wuppertal                                              <>
<>                                                              <>
<><><><><><><>< Of course it runs NetBSD http://www.netbsd.org ><>

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0 (INSTALL) #0: Sun Apr 26 06:51:04 UTC 2009
        
builds%b6.netbsd.org@localhost:/home/builds/ab/netbsd-5-0-RELEASE/amd64/200904260229Z-obj/home/builds/ab/netbsd-5-0-RELEASE/src/sys/arch/amd64/compile/INSTALL
total memory = 8189 MB
avail memory = 7921 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.4 @ 0xee000 (71 entries)
HP ProLiant DL380 G5
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2666MHz, id 0x1067a
cpu1 at mainbus0 apid 4: Intel 686-class, 2666MHz, id 0x1067a
cpu2 at mainbus0 apid 2: Intel 686-class, 2666MHz, id 0x1067a
cpu3 at mainbus0 apid 6: Intel 686-class, 2666MHz, id 0x1067a
cpu4 at mainbus0 apid 1: Intel 686-class, 2666MHz, id 0x1067a
cpu5 at mainbus0 apid 5: Intel 686-class, 2666MHz, id 0x1067a
cpu6 at mainbus0 apid 3: Intel 686-class, 2666MHz, id 0x1067a
cpu7 at mainbus0 apid 7: Intel 686-class, 2666MHz, id 0x1067a
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <HP    ,ProLiant,00000002>, AslId <  M-R^D,0000162e>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
MI0 (IPI0001) ACPI Error (nsxfeval-0213): Incorrect return type [Buffer] 
requested [String] [20080321]
at acpi0 not configured
attimer1 at acpi0 (TIME, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
hpet0 at acpi0 (HPET, PNP0103-0)
hpet0: mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
pcppi1 at acpi0 (BEEP, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13): aux port
pckbc2: irq 12
COMA (PNP0501) at acpi0 not configured
acpitz0 at acpi0 (THM0): critical 31.3C passive 8.3C, passive cooling
attimer1: attached to pcppi1
pckbdprobe: reset response 0x0
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x25d8 (rev. 0xb1)
ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x25e2 (rev. 0xb1)
pci1 at ppb0 bus 9
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x3500 (rev. 0x01)
pci2 at ppb1 bus 10
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 0 function 0: vendor 0x8086 product 0x3510 (rev. 0x01)
pci3 at ppb2 bus 11
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci2 dev 1 function 0: vendor 0x8086 product 0x3514 (rev. 0x01)
pci4 at ppb3 bus 14
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci2 dev 2 function 0: vendor 0x8086 product 0x3518 (rev. 0x01)
pci5 at ppb4 bus 17
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci1 dev 0 function 3: vendor 0x8086 product 0x350c (rev. 0x01)
ppb5: disabling notification events
pci6 at ppb5 bus 18
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci0 dev 3 function 0: vendor 0x8086 product 0x25e3 (rev. 0xb1)
pci7 at ppb6 bus 6
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ciss0 at pci7 dev 0 function 0: HP Smart Array 3
ciss0: interrupting at ioapic0 pin 18
ciss0: 1 LD, HW rev 4, FW 5.26/5.26
scsibus0 at ciss0: 1 target, 1 lun per target
ppb7 at pci0 dev 4 function 0: vendor 0x8086 product 0x25f8 (rev. 0xb1)
pci8 at ppb7 bus 19
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
ppb8 at pci0 dev 5 function 0: vendor 0x8086 product 0x25e5 (rev. 0xb1)
pci9 at ppb8 bus 22
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
ppb9 at pci0 dev 6 function 0: vendor 0x8086 product 0x25f9 (rev. 0xb1)
pci10 at ppb9 bus 23
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
ciss1 at pci10 dev 0 function 0: HP Smart Array P800
ciss1: interrupting at ioapic0 pin 19
ciss1: 4 LDs, HW rev 4, FW 5.26/5.26
scsibus1 at ciss1: 4 targets, 1 lun per target
ppb10 at pci0 dev 7 function 0: vendor 0x8086 product 0x25e7 (rev. 0xb1)
pci11 at ppb10 bus 26
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
pchb1 at pci0 dev 16 function 0
pchb1: vendor 0x8086 product 0x25f0 (rev. 0xb1)
pchb2 at pci0 dev 16 function 1
pchb2: vendor 0x8086 product 0x25f0 (rev. 0xb1)
pchb3 at pci0 dev 16 function 2
pchb3: vendor 0x8086 product 0x25f0 (rev. 0xb1)
pchb4 at pci0 dev 17 function 0
pchb4: vendor 0x8086 product 0x25f1 (rev. 0xb1)
pchb5 at pci0 dev 19 function 0
pchb5: vendor 0x8086 product 0x25f3 (rev. 0xb1)
pchb6 at pci0 dev 21 function 0
pchb6: vendor 0x8086 product 0x25f5 (rev. 0xb1)
pchb7 at pci0 dev 22 function 0
pchb7: vendor 0x8086 product 0x25f6 (rev. 0xb1)
ppb11 at pci0 dev 28 function 0: vendor 0x8086 product 0x2690 (rev. 0x09)
pci12 at ppb11 bus 2
pci12: i/o space, memory space enabled, rd/line, wr/inv ok
ppb12 at pci12 dev 0 function 0: vendor 0x1166 product 0x0103 (rev. 0xc3)
ppb12: disabling notification events
pci13 at ppb12 bus 3
pci13: i/o space, memory space enabled, rd/line, wr/inv ok
bnx0 at pci13 dev 0 function 0: Broadcom NetXtreme II BCM5708 1000Base-T
bnx0: Ethernet address 00:21:5a:f1:e7:30
brgphy0 at bnx0 phy 1: BCM5708C 1000BASE-T media interface, rev. 6
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb13 at pci0 dev 28 function 1: vendor 0x8086 product 0x2692 (rev. 0x09)
pci14 at ppb13 bus 4
pci14: i/o space, memory space enabled, rd/line, wr/inv ok
ppb14 at pci14 dev 0 function 0: vendor 0x1166 product 0x0103 (rev. 0xc3)
ppb14: disabling notification events
pci15 at ppb14 bus 5
pci15: i/o space, memory space enabled, rd/line, wr/inv ok
bnx1 at pci15 dev 0 function 0: Broadcom NetXtreme II BCM5708 1000Base-T
bnx1: Ethernet address 00:21:5a:f1:e7:2e
brgphy1 at bnx1 phy 1: BCM5708C 1000BASE-T media interface, rev. 6
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2688 (rev. 0x09)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2689 (rev. 0x09)
uhci1: interrupting at ioapic0 pin 17
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x268a (rev. 0x09)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x268b (rev. 0x09)
uhci3: interrupting at ioapic0 pin 19
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x268c (rev. 0x09)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb15 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xd9)
pci16 at ppb15 bus 1
pci16: i/o space, memory space enabled
vga0 at pci16 dev 3 function 0: vendor 0x1002 product 0x515e (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 0x0e11 product 0xb203 (miscellaneous system, revision 0x03) at pci16 dev 
4 function 0 not configured
vendor 0x0e11 product 0xb204 (miscellaneous system, revision 0x03) at pci16 dev 
4 function 2 not configured
uhci4 at pci16 dev 4 function 4: vendor 0x103c product 0x3300 (rev. 0x00)
uhci4: interrupting at ioapic0 pin 22
usb5 at uhci4: USB revision 1.0
vendor 0x103c product 0x3302 (IPMI serial bus, interface 0x01) at pci16 dev 4 
function 6 not configured
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2670 (rev. 0x09)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO timer reboot disabled by hardware; hope SMBIOS properly handles 
it.
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 631xESB/632xESB IDE Controller (rev. 0x09)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhub5 at usb5: vendor 0x103c UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhidev0 at uhub5 port 1 configuration 1 interface 0
uhidev0: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1
ukbd0 at uhidev0
sd0 at scsibus0 target 0 lun 0: <HP, LOGICAL VOLUME, 5.26> disk fixed
sd0: 136 GB, 35132 cyl, 255 head, 32 sec, 512 bytes/sect x 286677120 sectors
sd1 at scsibus1 target 0 lun 0: <HP, LOGICAL VOLUME, 5.26> disk fixed
sd1: 9314 GB, 65535 cyl, 255 head, 1168 sec, 512 bytes/sect x 19534592432 
sectors
sd1: mbr partition exceeds disk size
sd1: GPT GUID: 72552f80-4423-11de-ac94-00215af1e730
dk0 at sd1: 72552f8a-4423-11de-ac94-00215af1e730
dk0: 19534592365 blocks at 34, type: ffs
sd2 at scsibus1 target 1 lun 0: <HP, LOGICAL VOLUME, 5.26> disk fixed
sd2: 9314 GB, 65535 cyl, 255 head, 1168 sec, 512 bytes/sect x 19534592432 
sectors
sd2: GPT GUID: e53773a0-dffc-4fea-8afa-f6af15d77ef2
dk1 at sd2: pool3
dk1: 9767296182 blocks at 34, type: 
dk2 at sd2: pool4
dk2: 9767296183 blocks at 9767296216, type: 
sd3 at scsibus1 target 2 lun 0: <HP, LOGICAL VOLUME, 5.26> disk fixed
sd3: 9314 GB, 65535 cyl, 255 head, 1168 sec, 512 bytes/sect x 19534592432 
sectors
sd3: GPT GUID: 14019865-fbec-48a6-875a-e103510cba99
sd3: bad GPT partition array CRC
sd4 at scsibus1 target 3 lun 0: <HP, LOGICAL VOLUME, 5.26> disk fixed
sd4: 9314 GB, 65535 cyl, 255 head, 1168 sec, 512 bytes/sect x 19534592432 
sectors
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub5 port 1 configuration 1 interface 1
uhidev1: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse1 at ums0 mux 0
uhub6 at uhub5 port 2: HP Virtual Hub, class 9/0, rev 1.10/0.01, addr 3
uhub6: 7 ports with 7 removable, self powered
umass0 at uhub6 port 2 configuration 1 interface 0
umass0: HP Virtual CD-ROM, rev 1.10/0.03, addr 4
umass0: using ATAPI over Bulk-Only
atapibus0 at umass0: 2 targets
cd0 at atapibus0 drive 0: <HP, Virtual DVD-ROM, 0.0> cdrom removable
ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
Kernelized RAIDframe activated
md0: internal 5000 KB image area
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex
boot device: cd0
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 22 days
WARNING: CHECK AND RESET THE DATE!
warning: no /dev/console
ciss0: normal state on 'ciss0:0' (online)
ciss1: normal state on 'ciss1:0' (online)
ciss1: normal state on 'ciss1:1' (online)
ciss1: normal state on 'ciss1:2' (online)
ciss1: normal state on 'ciss1:3' (online)