RE: Netbsd 5.0 RC2 issues running newfs on ccd volume

["Derrick Lobo" <derrick%givex.com@localhost>]

BTW This is the first time I am using SAS instead of SCSI.

The dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_RC2 (GENERIC) #0: Mon Feb  9 03:56:31 UTC 2009
 
builds%b6.netbsd.org@localhost:/home/builds/ab/netbsd-5-0-RC2/amd64/200902090142Z-obj/
home/builds/ab/netbsd-5-0-RC2/src/sys/arch/amd64/compile/GENERIC
total memory = 8191 MB
avail memory = 7926 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.3 @ 0xfa2c0 (61 entries)
empty empty (empty)
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD 686-class, 1995MHz, id 0x100f23
cpu1 at mainbus0 apid 1: AMD 686-class, 1995MHz, id 0x100f23
cpu2 at mainbus0 apid 2: AMD 686-class, 1995MHz, id 0x100f23
cpu3 at mainbus0 apid 3: AMD 686-class, 1995MHz, id 0x100f23
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0 apid 5: pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0 apid 6: pa 0xfec02000, version 11, 16 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <070408,XSDT1803,20080704>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
acpi0: fixed-feature sleep button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 32-bit timer
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
FDC (PNP0700) at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103-52)
hpet0: mem 0xfed00000-0xfed03fff
timecounter: Timecounter "hpet0" frequency 232830 Hz quality 2000
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ppb0 at pci0 dev 1 function 0: vendor 0x1166 product 0x0036 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ppb1 at pci1 dev 13 function 0: vendor 0x1166 product 0x0104 (rev. 0xc0)
pci2 at ppb1 bus 2
pci2: memory space enabled
svwsata0 at pci1 dev 14 function 0
svwsata0: ServerWorks HT-1000 SATA Controller (rev. 0x00)
svwsata0: bus-master DMA support present
svwsata0: using ioapic0 pin 11 for native-PCI interrupt
svwsata0: primary channel wired to native-PCI mode
atabus0 at svwsata0 channel 0
svwsata0: secondary channel wired to native-PCI mode
atabus1 at svwsata0 channel 1
svwsata0: secondary channel wired to compatibility mode
atabus2 at svwsata0 channel 2
svwsata0: secondary channel configured to compatibility mode
atabus3 at svwsata0 channel 3
svwsata1 at pci1 dev 14 function 1
svwsata1: ServerWorks HT-1000 SATA Controller (rev. 0x00)

piixpm0 at pci0 dev 2 function 0
piixpm0: vendor 0x1166 product 0x0205 (rev. 0x00)
piixpm0: polling
iic0 at piixpm0: I2C bus
pciide0 at pci0 dev 2 function 1
pciide0: vendor 0x1166 product 0x0214 (rev. 0x00)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to compatibility mode
pciide0: primary channel interrupting at ioapic0 pin 14
atabus4 at pciide0 channel 0
pciide0: secondary channel configured to compatibility mode
pciide0: secondary channel ignored (not responding; disabled or no drives?)
pcib0 at pci0 dev 2 function 2
pcib0: vendor 0x1166 product 0x0234 (rev. 0x00)
ohci0 at pci0 dev 3 function 0: vendor 0x1166 product 0x0223 (rev. 0x01)
ohci0: interrupting at ioapic0 pin 10
ohci0: OHCI version 1.0, legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 3 function 1: vendor 0x1166 product 0x0223 (rev. 0x01)
ohci1: interrupting at ioapic0 pin 10
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 3 function 2: vendor 0x1166 product 0x0223 (rev. 0x01)
ehci0: interrupting at ioapic0 pin 10
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
fxp0 at pci0 dev 4 function 0: i82550 Ethernet, rev 16
fxp0: interrupting at ioapic1 pin 0
fxp0: Ethernet address 00:e0:81:4e:1c:4c
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb2 at pci0 dev 6 function 0: vendor 0x1166 product 0x0130 (rev. 0xb0)
pci3 at ppb2 bus 3
pci3: memory space enabled
ppb3 at pci0 dev 7 function 0: vendor 0x1166 product 0x0130 (rev. 0xb0)
pci4 at ppb3 bus 4
pci4: memory space enabled
bge0 at pci4 dev 4 function 0: Broadcom BCM5780 Gigabit Ethernet
bge0: interrupting at ioapic1 pin 10
bge0: ASIC unknown BCM5780 (0x8100), Ethernet address 00:e0:81:4e:2b:2c
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5780 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge1 at pci4 dev 4 function 1: Broadcom BCM5780 Gigabit Ethernet
bge1: interrupting at ioapic1 pin 11
bge1: ASIC unknown BCM5780 (0x8100), Ethernet address 00:e0:81:4e:2b:2d
bge1: setting short Tx thresholds
brgphy1 at bge1 phy 1: BCM5780 1000BASE-T media interface, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb4 at pci0 dev 8 function 0: vendor 0x1166 product 0x0132 (rev. 0xb0)
pci5 at ppb4 bus 5
pci5: memory space enabled
ppb5 at pci0 dev 9 function 0: vendor 0x1166 product 0x0132 (rev. 0xb0)
pci6 at ppb5 bus 6
pci6: memory space enabled
ppb6 at pci0 dev 10 function 0: vendor 0x1166 product 0x0132 (rev. 0xb0)
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled
mpt0 at pci7 dev 0 function 0: vendor 0x1000 product 0x0059
mpt0: interrupting at ioapic1 pin 14
mpt0: Phy 0: Link Rate 3.0 Gbps
mpt0: Phy 1: Link Rate 3.0 Gbps
mpt0: Phy 4: Link Rate 3.0 Gbps
scsibus0 at mpt0: 173 targets, 8 luns per target
ppb7 at pci0 dev 11 function 0: vendor 0x1166 product 0x0132 (rev. 0xb0)
pci8 at ppb7 bus 8
pci8: memory space enabled
vga0 at pci0 dev 12 function 0: vendor 0x1002 product 0x515e (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
pchb0 at pci0 dev 24 function 0
pchb0: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: vendor 0x1022 product 0x1202 (rev. 0x00)
amdtemp0 at pci0 dev 24 function 3
amdtemp0: AMD CPU Temperature Sensors (Family10h / Family11h)
pchb3 at pci0 dev 24 function 4
pchb3: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1995103640 Hz quality 3000
scsibus0: waiting 2 seconds for devices to settle...
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x1166 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1166 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x1166 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
svwsata0 port 0: PHY offline
svwsata0 port 1: PHY offline
svwsata0 port 2: PHY offline
svwsata0 port 3: PHY offline
atapibus0 at atabus4: 2 targets
cd0 at atapibus0 drive 1: <PIONEER DVD-RW DVR-K17RS, GLDL321398WL, 1.00>
cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST373455SS, 0004> disk fixed
sd0: 70007 MB, 74340 cyl, 2 head, 964 sec, 512 bytes/sect x 143374744
sectors
sd1 at scsibus0 target 1 lun 0: <SEAGATE, ST3500620SS, 0001> disk fixed
sd1: 465 GB, 153352 cyl, 4 head, 1592 sec, 512 bytes/sect x 976773168
sectors
sd2 at scsibus0 target 4 lun 0: <SEAGATE, ST3500620SS, 0001> disk fixed
sd2: 465 GB, 153352 cyl, 4 head, 1592 sec, 512 bytes/sect x 976773168
sectors
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

-----Original Message-----
From: Alistair Crooks [mailto:agc%pkgsrc.org@localhost] 
Sent: Friday, March 27, 2009 3:16 PM
To: Derrick Lobo
Cc: 'Port-Amd64@Netbsd. Org'; netbsd-help%NetBSD.org@localhost
Subject: Re: Netbsd 5.0 RC2 issues running newfs on ccd volume

On Fri, Mar 27, 2009 at 01:40:56PM -0400, Derrick Lobo wrote:
> I have recently begun testing netbsd 5.0 RC2 200902090142Z and am having
> issues configuring the ccd colume.. I am following all steps as before
> however I am unable to format the new filesystem.. I get the following
error
> 
> # newfs  /dev/ccd0a                 
> newfs: /dev/ccd0a: open for write: Device busy

Try using the raw device:

        newfs /dev/rccd0a

Regards,
Alistair