Port-alpha archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Trouble booting 9.2 on Alpha Jensen



Hi, I'm new to this group but have been on NetBSD-VAX for quite som etime.

I have an Alpha with VMS on it, bit am trying to get NetBSD running so as to be able to use a SCSI disk that somebody gave me.

The disk is 77GB and won't format under VMS.  It tries to then gets all sorts of errors due to misreading the geometry, I guess.

I downloaded and dd'ed an ISO and it starts to boot in the CD of the Alpha, but hangs after accessing the floppy:

>>> boo dka400
INIT-S-CPU...
AUDIT_BOOT_STARTS ...
AUDIT_CHECKSUM_GOOD
AUDIT_LOAD_BEGINS
AUDIT_LOAD_DONE


NetBSD/alpha 9.2 ISO 9660 Primary Bootstrap
Jumping to entry point...

NetBSD/alpha 9.2 Secondary Bootstrap, Revision 1.13 (Wed May 12 13:15:55 UTC 2021)

VMS PAL rev: 0x100010530
OSF PAL rev: 0x20123
Switch to OSF PAL code succeeded.

Boot flags: 0,0
11014768+206128=0xab3d90

Entering netbsd at 0xfffffc0000a011a0...
[   1.0000000] Unrecognized boot flag '0'.
[   1.0000000] Unrecognized boot flag ','.
[   1.0000000] Unrecognized boot flag '0'.
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[   1.0000000]     2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 9.2 (INSTALL) #0: Wed May 12 13:15:55 UTC 2021
[   1.0000000]  mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/alpha/compile/INSTALL
[   1.0000000] DEC2000 model 300, 150MHz, s/n
[   1.0000000] 8192 byte page size, 1 processor.
[   1.0000000] total memory = 256 MB
[   1.0000000] (2048 KB reserved for PROM, 254 MB used by NetBSD)
[   1.0000000] avail memory = 239 MB
[   1.0000000] mainbus0 (root)
[   1.0000000] cpu0 at mainbus0: ID 0 (primary), 21064-0
[   1.0000000] jensenio0 at mainbus0
[   1.0000000] pckbc0 at jensenio0 port 0x60
[   1.0000000] com0 at jensenio0 port 0x3f8: ns8250 or ns16450, no fifo
[   1.0000000] com0: console
[   1.0000000] com0: interrupting at vector 0x900
[   1.0000000] com1 at jensenio0 port 0x2f8: ns8250 or ns16450, no fifo
[   1.0000000] com1: interrupting at vector 0x920
[   1.0000000] lpt0 at jensenio0 port 0x3bc
[   1.0000000] lpt0: interrupting at eisa irq 1
[   1.0000000] mcclock0 at jensenio0 port 0x170: mc146818 compatible time-of-day clock
[   1.0000000] eisa0 at jensenio0
[   1.0000000] device CPQ3111 at eisa0 slot 1 not configured
[   1.0000000] depca2 at eisa0 slot 2: DEC DE422 Ethernet
[   1.0000000] depca2: shared memory at 0xd0000-0xdffff
[   1.0000000] le0 at depca2
[   1.0000000] le0: failed to clear memory at 0 (0xff != 0xaa)
[   1.0000000] ahb0 at eisa0 slot 6: Adaptec AHA-1742A SCSI
[   1.0000000] ahb0: interrupting at eisa irq 12
[   1.0000000] scsibus0 at ahb0: 8 targets, 8 luns per target
[   1.0000000] isa0 at jensenio0
[   1.0000000] vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
[   1.0000000] wsdisplay0 at vga0 (kbdmux ignored)
[   1.0000000] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2

Has anybody seen this problem before that maybe knows a solution? Or how to disable testing the isa floppy drive at all?

btw the console shows it as under-sized!  It is DKA200:

>> sho dev

  BOOTDEV      ADDR      DEVTYPE    RM/FX    DEVNAM      REV     NUMBYTES
  -------      ----      -------    -----    ------      ---     --------
  ERA0         08-00-2B-BB-88-6B
  DVA0         PC Floppy DISK       RM  
  SCSI Devices..
  DKA0         A/0/0     DISK       FX       RZ28        D41C      2.10GB
  DKA100     A/1/0     DISK       FX       RZ28        D41C      2.10GB
  DKA200     A/2/0     DISK       FX       ST11827     6244      1.03GB
  DKA400     A/4/0     RODISK  RM      RRD44       1094    ...... 
  MKA500     A/5/0     TAPE      RM      TLZ06       0491    ...... 
  HOST         A/7/0     PROC                 AHA1742A    G.2

>>>

Thanks in advance,

Nigel



-- 
Nigel Johnson, MSc., MIEEE, MCSE VE3ID/G4AJQ/VA3MCU
Amateur Radio, the origin of the open-source concept!
Skype:  TILBURY2591 nw.johnson%ieee.org@localhost



Attachment: OpenPGP_0x94CC6E54F9770B67.asc
Description: OpenPGP public key

Attachment: OpenPGP_signature
Description: OpenPGP digital signature



Home | Main Index | Thread Index | Old Index