Port-alpha archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: Yes, NetBSD still boots on pretty ancient Alphas...



Hi Jason,

Here is the output:

[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 9.99.86 (INSTALL) #0: Tue Jul 20 05:43:10 UTC 2021
[   1.0000000]  mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/alpha/compile/INSTALL
[   1.0000000] DEC2000 model 300, 150MHz, s/n
[   1.0000000] 8192 byte page size, 1 processor.
[   1.0000000] total memory = 65536 KB
[   1.0000000] (2048 KB reserved for PROM, 63488 KB used by NetBSD)
[   1.0000000] avail memory = 51280 KB
[   1.0000000] mainbus0 (root)
[   1.0000000] cpu0 at mainbus0: ID 0 (primary), 21064-0 (EV4)
[   1.0000000] jensenio0 at mainbus0
[   1.0000000] pckbc0 at jensenio0 port 0x60
[   1.0000000] com0 at jensenio0 port 0x3f8: ns8250 or ns16450, no fifo
[   1.0000000] com0: console
[   1.0000000] com0: interrupting at vector 0x900
[   1.0000000] com1 at jensenio0 port 0x2f8: ns8250 or ns16450, no fifo
[   1.0000000] com1: interrupting at vector 0x920
[   1.0000000] lpt0 at jensenio0 port 0x3bc
[   1.0000000] lpt0: interrupting at eisa irq 1
[   1.0000000] mcclock0 at jensenio0 port 0x170: mc146818 compatible time-of-day clock
[   1.0000000] eisa0 at jensenio0
[   1.0000000] device CPQ3111 at eisa0 slot 1 not configured
[   1.0000000] ahb0 at eisa0 slot 3: Adaptec AHA-1740A SCSI
[   1.0000000] ahb0: interrupting at eisa irq 12
[   1.0000000] scsibus0 at ahb0: 8 targets, 8 luns per target
[   1.0000000] depca2 at eisa0 slot 4: DEC DE422 Ethernet
[   1.0000000] depca2: shared memory at 0xd0000-0xdffff
[   1.0000000] le0 at depca2
[   1.0000000] le0: failed to clear memory at 0 (0xff != 0xaa)
[   1.0000000] ahb1 at eisa0 slot 6: Adaptec AHA-1742A SCSI
[   1.0000000] ahb1: interrupting at eisa irq 14
[   1.0000000] scsibus1 at ahb1: 8 targets, 8 luns per target
[   1.0000000] isa0 at jensenio0
[   1.0000000] vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
[   1.0000000] wsdisplay0 at vga0 (kbdmux ignored)
[   1.0000000] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
Stopped in pid 0.0 (system) at  fffffc0000a533d0:       ret     zero,(ra)
db> show event
db_read_ptr: cannot find `allevents'
db>

 



On Tue, Jul 20, 2021 at 4:12 PM Jason Thorpe <thorpej%me.com@localhost> wrote:

> On Jul 20, 2021, at 7:09 AM, Jason Thorpe <thorpej%me.com@localhost> wrote:
>
>
>
>> On Jul 19, 2021, at 11:59 PM, Istvan Gyenes <igyenes%gmail.com@localhost> wrote:
>>
>> Great, cdhdtape is perfect waiting for the test image ;)
>
> I haven’t done the DDB thing in the images yet, but can you try this one?

Oh!  DDB is already enabled, so please go ahead and give this one a whirl!

If it gets stuck, please break into DDB (sending a BREAK on the serial line) and do “show event” from the DDB prompt.

Thanks!

-- thorpej



Home | Main Index | Thread Index | Old Index