avrdude: COMMIT_MSG added

[Michael Baeuerle <micha%NetBSD.org@localhost>]

Module Name:	pkgsrc-wip
Committed By:	Michael Baeuerle <micha%NetBSD.org@localhost>
Pushed By:	micha
Date:		Fri Jun 17 12:44:21 2022 +0200
Changeset:	cf0eb06a91831a843cdc60f3c1778b0d0030dfec

Added Files:
	avrdude/COMMIT_MSG

Log Message:
avrdude: COMMIT_MSG added

To see a diff of this commit:
https://wip.pkgsrc.org/cgi-bin/gitweb.cgi?p=pkgsrc-wip.git;a=commitdiff;h=cf0eb06a91831a843cdc60f3c1778b0d0030dfec

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.

diffstat:
 avrdude/COMMIT_MSG | 185 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 185 insertions(+)

diffs:
diff --git a/avrdude/COMMIT_MSG b/avrdude/COMMIT_MSG
new file mode 100644
index 0000000000..f71bec0c34
--- /dev/null
+++ b/avrdude/COMMIT_MSG
@@ -0,0 +1,185 @@
+cross/avrdude: Update to 7.0
+
+Changes in version 7.0:
+
+  * Major changes compared to the previous version:
+
+    - Completely revamped Windows support, including MSVC
+    - Started to add CMake (by now, parallel with autoconf/automake)
+    - New-architecture devices (AVR8X mega and tiny) can access all
+      fuses, and memory display shows meaningful alias names
+    - The "safemode" feature has been removed. The major class of
+      programmers it has been designed for (lowlevel bitbang
+      programmers on parallel or serial ports) virtually doesn't exist
+      anymore, and the fuse combination that was covered by it do not
+      match the fuses of modern AVR devices anyway.
+    - avrdude.conf is now being looked up in the location of the
+      executable file first, before considering the configured default
+      location; this eases a "portable use" where the entire suite is
+      not installed into its configured default location. (Basically
+      only relevant for unixoid systems; on Windows, this search order
+      has been used for many years already.)
+
+  * New devices supported:
+
+    - ATtiny828, ATtiny87, ATtiny167, ATtiny48, ATtiny102, ATtiny104
+    - LGT8F88P, LGT8F168P, LGT8F328P (fixed names of these parts)
+    - ATmeg164A, ATmega169A, ATmega169P, ATmega169PA, ATmega329A,
+      ATmega329PA, ATmega3290, ATmega3290A, ATmega3290PA, ATmega649A,
+      ATmega649P, ATmega6490A, ATmega6490P, ATmega165, ATmega165A,
+      ATmega165P, ATmega165PA, ATmega325A, ATmega325P, ATmega325PA,
+      ATmega645A, ATmega645P, ATmega3250A, ATmega3250P, ATmega3250PA,
+      ATmega6450A, ATmega6450P
+    - ATmega48A/48PA/88A/88PA/168A/168PA, ATmega164A/644A/644PA,
+      ATmega16A/32A/64A/128A, ATtiny13A, ATtiny24A/44A/84A,
+      ATtiny261A/461A/861A, ATtiny828R, ATtiny2313A, ATtiny1634R
+    - ATtiny3224, ATtiny3226 and ATtiny3227
+    - AVR16DD14/20/28/32, AVR32DD14/20/28/32 and AVR64DD14/20/28/32
+    - AVR8EA28/32, AVR16EA28/32/48, AVR32EA28/32/48 and AVR64EA28/32/64
+    - ATmega16U4
+
+
+  * New programmers supported:
+
+    - SerialUPDI (UPDI devices connected to serial port with few
+      passive parts)
+    - PicKit4 / SNAP (now also in ISP and PDI mode)
+    - Teensy bootloader (PR #802)
+    - Micronucleus bootloader (PR #786)
+    - ft232h (generic variant, PR #842)
+    - Kristech KT-LINK FT2232H interface with IO switching and voltage
+      buffers (PR #930)
+
+  * Issues fixed:
+
+    - Curiosity Nano and terminal mode #790 (only the actual bugs
+      reported)
+    - CMake doesn't correctly handle conditionals in avrdude.conf.in
+      #776
+    - CMake doesn't detect FreeBSD's libusb-1.0 (compatibility) #775
+    - CMake doesn't correctly handle conditionals in avrdude.conf.in
+      #776
+    - CMake: Recognize more than just bison #785
+    - [bug #26007] ATTiny167 not supported #150
+    - [bug #47375] ATtiny102/104 descriptions missing in configuration
+      file #409
+    - No error message when connecting to a not-connected AVRISP mkII
+      programmer #813
+    - [bug #53180] missing programmer or bad -P option argument
+      doesn't result in error message #471
+    - ATmega328P reported as lgt8fx328p #812
+    - [bug #48004] Dead link for linuxgpio in avrdude description #419
+    - Segmentation fault when writing ATtiny104 fuse #823
+    - USBasp returns ERANGE for unknown error #848
+    - Compiler warnings #856
+    - Can't get serialupdi to work #874
+    - Rework HID support for Windows #881
+    - List of signing keys? #884
+    - Pickit4 UPDI is writing at offset 0x4000 into flash instead of 0x0000. #892
+    - SerialUPDI programmer can't write to usersig/userrow in terminal mode #889
+    - Signature read command for ATmega165* was wrong (no-id)
+    - Cannot use non-standard baud rates for uploading on MacOS #771
+    - Wrong values in avrdude.conf #897
+    - AVR-Eclipse plugin broken by missing -u commandline option #890
+    - Timeout passed to hid_read_timeout() is too short for instances
+      where the EDBG AVRISP 'Enter Programming Mode' command fails #900
+    - Terminal write mode doesn't support string input (yet) #913
+    - Terminal mode: memory fill with strings may cause Avrdude to crash. #922
+    - Some parts have wrong or missing ISP commands #915
+    - Incorrect -b conversion for linuxspi programmer #927
+    - ATtiny43U calibration memory size #921
+
+  * Pull requests:
+
+    - GitHub Migration #765
+    - Update toplevel files. #767
+    - GitHub Migration part 2 #768
+    - Remove 'windows' folder with giveio.sys driver #769
+    - SerialUPDI implementation - release candidate 1 #772
+    - Fix typos #777
+    - Fix memory leaks #779
+    - As promised, documentation for SerialUPDI programmer #782
+    - Improve CMake project #783
+    - Fix avr_read() for page reads #784
+    - Serialupdi manpage #787
+    - Add PicKit4 and SNAP programmers #791
+    - Use yacc/byacc as an alternative to bison, closes #785 #793
+    - Derive program version string from last commit #794
+    - Find 'avrdude.conf' based on absolute path to executable #780
+    - buspirate: fix -Wtautological-constant-out-of-range-compare #796
+    - avrftdi: don't use the deprecated ftdi_usb_purge_buffers routine #792
+    - Ignore ctags index file #804
+    - term: fix memleakOnRealloc #806
+    - Add missing ATtiny targets to avrdude.conf #803
+    - Add support for Teensy bootloader #802
+    - Conffile clean up #801
+    - Fix typos all over the code #807
+    - Add MSVC builds and better WinUSB/FTDI support #798
+    - buspirate: fix invalidScanfArgType_int warning #808
+    - Ignore ac_cfg.h.in~ #810
+    - Notify open failure #814
+    - Print expected part #817
+    - pindefs: conform to the function declaration #818
+    - Add support for Micronucleus bootloader #786
+    - Remove ac_cfg.h from libavrdude.h #820
+    - CMake: enable dynamic-link library for libavrdude #826
+    - Fix for TPI fuse write (issue #823) #828
+    - Add missing ATmega__5 and ATmega__9 targets to avrdude.conf #809
+    - Add missing ATmega and ATtiny targets #832
+    - Added missing RTS/DTR management feature to serialupdi
+      programmer #811
+    - Add missing tinyAVR-2, AVR DD and AVR EA targets #836
+    - Add a new programmer ft232h #842
+    - Reduce verbosity when setting fuses and uploading programs #845
+    - jtagmkii: Reduce the number of sync attempts to 10 + print
+      number of attempts #844
+    - CMake: add initial support for installing lib and include files #829
+    - Add SPI support to USBtiny #816
+    - Add more memory sections to read from #815
+    - Add a build script for Unix-like systems #849
+    - Fix receive buffer implementation in ftdi_syncbb programmer #843
+    - CMake: split configuration in two files #852
+    - Set number of connection retry attempts for Arduino/STK500
+      programmer #854
+    - Fix libusb-1.0 error strings #850
+    - Assign proper type to msg[] in errstr() #857
+    - Fix Arduino retry attempts #855
+    - CMake: use CMAKE_CURRENT_BINARY_DIR to locate avrdude.conf #858
+    - Remove the "safemode" feature. #859
+    - Add support for reading from more memory sections #863
+    - Alias keyword #868
+    - Add fuse name aliases to avrdude.conf + tweak update.c #869
+    - Print JTAG3 clocks after configuration + string formatting #853
+    - Tweak programmer info formatting strings #872
+    - Remove libhid support in ser_avrdoper.c in favor of libhidapi #882
+    - Reduce jtag3 output verbosity #877
+    - Fix Curiosity Nano target voltage #878
+    - Smallest possible fix for PL2303HX #885
+    - Add missing USBtiny derived programmers #873
+    - Cleanup of POSIX serial init code #886
+    - Avrdude terminal write improvements #880
+    - Add userrow and usersig aliases #888
+    - For UPDI devices do not add offset when accessing flash. #895
+    - Support both userrow and usersig names #893
+    - Fix ugly terminal write bug #896
+    - Improve terminal read functionality #894
+    - Macos nonstandard baudrates #898
+    - Fix errors in Avrdude.conf #899
+    - Minor terminal write improvements #902
+    - Term docs #903
+    - Add progressbar for read and write command #912
+    - Add MacOS serial/parallel port note #908
+    - Add ATmega16U4 to avrdude.conf #910
+    - Mask out unused ATmega32U4 efuse bits #909
+    - Increased timeout passed to hid_read_timeout() #901
+    - Add terminal write string functionality #914
+    - Update documentation link to new URL #929
+    - Fix terminal write buffer overflow issue #924
+    - Fix linuxspi baud to clock period calculation #931
+    - Added KT-LINK FT2232H interface with IO switching and voltage buffers. #930
+
+  * Internals:
+
+    - Development moved to Github
+    - Addition of "alias" keyword to avrdude.conf.in syntax; used
+      for fuse name aliases right now