NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: port-prep/37597

The following reply was made to PR port-prep/37597; it has been noted by GNATS.

From: T <>
Subject: Re: port-prep/37597
Date: Mon, 30 Jul 2018 18:44:24 -0600

 I have tried installing from the CDROM with 8.0 and it appears to not 
 boot (stuck on PowerPC white screen) when connected to the VGA port, but 
 as mentioned previously, the CDROM boot uses the serial port. When 
 connected to the serial port, it does reach the NetBSD bootloader, but 
 has this problem:
  >> NetBSD/prep BOOT, Revision 1.9 (Tue Jul 17 14:59:51 UTC 2018)
 phase mismatch without command
 selection timeout without command
 unhandled scsi interrupt, sist=0xffff sstat1=0xff DSA=0xffffffff 
 XXXXX: fatal error, need reset the bus...
 (repeating loop from INTRF)
 Someone else had this problem too:

Home | Main Index | Thread Index | Old Index