Re: port-arm32/50288 (NetBSD-7.0_RC3/evbarm-earmv7hf/binary/gzimg/armv7.img doesn't boot on BBB)

["David S. Alessio" <david.s.alessio%gmail.com@localhost>]

I suspect your SD card is actually booting from a NetBSD partition on the on-board flash.
Can you try erasing the on-board flash?  Does the SD card still boot?

Regards,
-david

> On Nov 12, 2015, at 4:30 AM, Michael van Elst <mlelstv%serpens.de@localhost> wrote:
> 
> The following reply was made to PR port-arm32/50288; it has been noted by GNATS.
> 
> From: mlelstv%serpens.de@localhost (Michael van Elst)
> To: gnats-bugs%netbsd.org@localhost
> Cc: 
> Subject: Re: port-arm32/50288 (NetBSD-7.0_RC3/evbarm-earmv7hf/binary/gzimg/armv7.img doesn't boot on BBB)
> Date: Thu, 12 Nov 2015 12:27:41 +0000 (UTC)
> 
> david.s.alessio%gmail.com@localhost ("David S. Alessio") writes:
> 
>> There=E2=80=99s still a problem with reading/booting from the SD card.
>> I tried netbsd-7/201511091230Z/evbarm-earmv7hf/binary/gzimg/arm7.img.gz:
> 
> 
> BBB boots -current (not netbsd-7) here from an SD card without problems.
> 
> There is a single 'sdhc1: cmd timeout error' because one command
> fails when probing the on-board card.
> 
> Maybe your errors are SD-card related?
> 
> 
> ## Transferring control to NetBSD stage-2 loader (at address 80300000) ...
> defgh
> uboot arg = 0x9f238fe0, 0, 0x9f3a1235, 0x9f2405e0
> [ Kernel symbol table missing! ]
> Loaded initial symtab at 0x8061e268, strtab at 0x8064f3b8, # entries 12547
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
>     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
>     The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
> 
> NetBSD 7.99.21 (BLA) #29: Tue Nov  3 08:13:07 CET 2015
>         mlelstv@pussyfoot:/home/netbsd-current/obj.evbarm/home/netbsd-current/src/sys/arch/evbarm/compile/BLA
> total memory = 512 MB
> avail memory = 500 MB
> sysctl_createv: sysctl_create(machine_arch) returned 17
> timecounter: Timecounters tick every 10.000 msec
> mainbus0 (root)
> cpu0 at mainbus0 core 0: 550 MHz Cortex-A8 r3p2 (Cortex V7A core)
> cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
> cpu0: sctlr: 0xc5187d
> cpu0: actlr: 0x42
> cpu0: revidr: 0x413fc082
> cpu0: isar: [0]=0x101111 [1]=0x13112111 [2]=0x21232031 [3]=0x11112131, [4]=0x11142, [5]=0
> cpu0: mmfr: [0]=0x1100003 [1]=0x20000000 [2]=0x1202000 [3]=0x211
> cpu0: pfr: [0]=0x1131 [1]=0x11
> cpu0: 32KB/64B 4-way L1 VIPT Instruction cache
> cpu0: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
> cpu0: 256KB/64B 8-way write-through L2 PIPT Unified cache
> vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
> vfp0: mvfr: [0]=0x11110222 [1]=0x11111
> obio0 at mainbus0 base 0x44000000-0x4fffffff: On-Board IO
> omapicu0 at obio0 addr 0x48200000-0x48200fff intrbase 0
> prcm0 at obio0 addr 0x44e00000-0x44e01fff: Power, Reset and Clock Management
> sitaracm0 at obio0 addr 0x44e10000-0x44e11fff: control module, rev 1.0
> edma0 at obio0 addr 0x49000000-0x490fffff intrbase 12
> gpmc0 at mainbus0 base 0x50000000: General Purpose Memory Controller, rev 6.0
> gpmc0: CS#0 valid, addr 0x08000000, size 256MB
> com0 at obio0 addr 0x44e09000-0x44e09fff intr 72: ns16550a, working fifo
> com0: console
> sdhc0 at obio0 addr 0x48060100-0x48060fff intr 64sdhc0: EDMA tx channel 24, rx channel 25
> : SDHC controller (EDMA)
> sdhc0: SDHC 2.0, rev 49, platform DMA, 96000 kHz, HS 1.8V 3.0V, 1024 byte blocks
> sdmmc0 at sdhc0 slot 0
> sdhc1 at obio0 addr 0x481d8100-0x481d8fff intr 28sdhc1: EDMA tx channel 2, rx channel 3
> : SDHC controller (EDMA)
> sdhc1: SDHC 2.0, rev 49, platform DMA, 96000 kHz, HS 1.8V 3.0V, 1024 byte blocks
> sdmmc1 at sdhc1 slot 0
> tiiic0 at obio0 addr 0x44e0b000-0x44e0bfff intr 70: rev 0.11
> iic0 at tiiic0: I2C bus
> seeprom0 at iic0 addr 0x50: AT24Cxx or compatible EEPROM: size 32768
> tps65217pmic0 at iic0 addr 0x24: TPS65217C Power Management Multi-Channel IC (rev 1.2)
> tps65217pmic0: power sources USB max 1300 mA, [AC] max 2500 mA
> tps65217pmic0: [LDO1: 1800 mV] [LDO2: 3300 mV] [LDO3: 1800 mV] [LDO4: 3300 mV] [DCDC1: 1500 mV] [DCDC2: 1100 mV] [DCDC3: 1100 mV] 
> omapdmtimer0 at obio0 addr 0x48040000-0x48040fff intr 68: DMTIMER2
> omapdmtimer1 at obio0 addr 0x44e31000-0x44e31fff intr 67: DMTIMER1ms
> omapdmtimer2 at obio0 addr 0x48044000-0x48044fff intr 92: DMTIMER4
> omapwdt32k0 at obio0 addr 0x44e35000-0x44e35fff: rev 0.1
> tiotg0 at obio0 addr 0x47400000-0x47404fff intrbase 17: TI dual-port USB controller: version v1.0.0.13
> motg0 at tiotg0 port 0: 0x4ea20800 version v0.0.0
> motg1 at tiotg0 port 1: 0x4ea20800 version v0.0.0
> motg1: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
> usb0 at motg1: USB revision 2.0
> cpsw0 at obio0 addr 0x4a100000-0x4a107fff intrbase 40: TI CPSW Ethernet
> cpsw0: Ethernet address 90:59:af:5b:7d:8d
> ukphy0 at cpsw0 phy 0: OUI 0x00800f, model 0x000f, rev. 1
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> trng0 at obio0 addr 0x48310000-0x48311fff intr 111
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> timecounter: Timecounter "dmtimer" frequency 24000000 Hz quality 100
> uhub0 at usb0: Mentor Graphics MOTG root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 1 port with 1 removable, self powered
> sdhc1: cmd timeout error
> WARNING: module error: can't find builtin dependency `nfsserver'
> ld1 at sdmmc1: <0xfe:0x014e:MMC02G:0x00:0x5581cc4e:0x000>
> ld1: 1832 MB, 930 cyl, 64 head, 63 sec, 512 bytes/sect x 3751936 sectors
> ld1: 4-bit width, 52.000 MHz
> ld0 at sdmmc0: <0x03:0x5344:SL08G:0x80:0x00755ab0:0x0f3>
> ld0: 7580 MB, 3850 cyl, 64 head, 63 sec, 512 bytes/sect x 15523840 sectors
> ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
> boot device: ld0
> root on ld0a dumps on ld0b
> mountroot: trying ext2fs...
> mountroot: trying ffs...
> root file system type: ffs
> kern.module.path=/stand/evbarm/7.99.21/modules
> WARNING: no TOD clock present
> WARNING: using filesystem time
> WARNING: CHECK AND RESET THE DATE!
> init: copying out path `/sbin/init' 11
> 
> -- 
> -- 
>                                 Michael van Elst
> Internet: mlelstv%serpens.de@localhost
>                                 "A potential Snark may lurk in every tree."
>