PR/49018 CVS commit: [netbsd-6] src/sys/dev

["Martin Husemann" <martin%netbsd.org@localhost>]

The following reply was made to PR kern/49018; it has been noted by GNATS.

From: "Martin Husemann" <martin%netbsd.org@localhost>
To: gnats-bugs%gnats.NetBSD.org@localhost
Cc: 
Subject: PR/49018 CVS commit: [netbsd-6] src/sys/dev
Date: Sun, 7 Dec 2014 16:39:56 +0000

 Module Name:	src
 Committed By:	martin
 Date:		Sun Dec  7 16:39:55 UTC 2014
 
 Modified Files:
 	src/sys/dev/mii [netbsd-6]: brgphy.c brgphyreg.h
 	src/sys/dev/pci [netbsd-6]: if_bge.c if_bgereg.h if_bnx.c if_bnxreg.h
 	    if_bnxvar.h
 
 Log Message:
 Pull up the following, requested by msaitoh in #1207:
 
 sys/dev/mii/brgphy.c				1.69, 1.71-1.76 via patch
 sys/dev/mii/brgphyreg.h				1.6-1.7, 1.9
 sys/dev/pci/if_bge.c				1.259,1.267-1.276 via patch
 sys/dev/pci/if_bgereg.h				1.87-1.88
 sys/dev/pci/if_bnx.c				1.48, 1.49, 1.52-1.57 via patch
 sys/dev/pci/if_bnxreg.h				1.15-1.18
 sys/dev/pci/if_bnxvar.h				1.4-1.6
 
 	Changes for bge(4), bnx(4) and brgphy(4):
 	- Add device IDs for Broadcom BCM57710, BCM57711(E), BCM57712(E) and
 	  BCM5719 into pcidevs.
 	- Change BCM5720's device ID from 0x1658 to 0x165f. 0x1658 is only for
 	  the pre-product and not released to public.
 	- Fix detection of BGEPHYF_FIBER_{MII|TBI}
 	- Fix typo in comment.
 	- KNF
 	- brgphy(4):
 	  - Add BCM5708S support.
 	  - Add 2500SX support.
 	  - Fix bit definition of BRGPHY_MRBE_MSG_PG5_NP_T2 from FreeBSD.
 	  - Remove extra delay in brgphy_mii_phy_auto. Same as {Free,Open}BSD.
 	  - Fix media detect on some Fiber chips.
 	  - Add BCM5706.
 	- bge(4):
 	  - Print yet another hardware config word in SRAM(BGE_SRAM_DATA_CFG_5)
 	    for BCM5717 and newer devices.
 	  - Fix a trivial bug in #ifdef NOTYET.
 	  - Add BGEPHYF_NO_WIRESPEED flag for fiber devices.
 	  - Print APE firmware correctly.
 	  - Don't use the PHY Auto Poll Mode on many chips. This fixes a bug
 	    that MII Fiber NIC drop packets about 50%. Same as {Free,Open}BSD.
 	    Tested on HP Moonshot.
 	  - Add workaround for PR#48451. Some BCM5717-5720 based systems get
 	    NMI on boot. This problem doesn't occur when we don't use
 	    prefetchable memory in the APE area. I don't know the reason...
 	    Tested with HP MicroServer Gen8.
 	  - Fix a bug that bge can't be initialized correctly on some sparc64
 	    systems (PR#49018).
 	  - Change initializaton order as the same as the document, Linux tg3
 	    and FreeBSD (part of r241436).
 	  - In the BCM5703, the DMA read watermark should be set to less than
 	    or equal to the maximum memory read byte count of the PCI-X command
 	    register. Same as FreeBSD r204978 and Linux tg3 driver.
 	- bnx(4):
 	  - Enclose #ifdef BNX_DEBUG correctly.
 	  - Add 2500SX support.
 	  - Print some information (ASCI revision, PCI status, etc).
 	    From FreeBSD.
 
 
 To generate a diff of this commit:
 cvs rdiff -u -r1.59.8.6 -r1.59.8.7 src/sys/dev/mii/brgphy.c
 cvs rdiff -u -r1.5.14.1 -r1.5.14.2 src/sys/dev/mii/brgphyreg.h
 cvs rdiff -u -r1.200.2.3 -r1.200.2.4 src/sys/dev/pci/if_bge.c
 cvs rdiff -u -r1.56.18.3 -r1.56.18.4 src/sys/dev/pci/if_bgereg.h
 cvs rdiff -u -r1.45.8.1 -r1.45.8.2 src/sys/dev/pci/if_bnx.c
 cvs rdiff -u -r1.14 -r1.14.10.1 src/sys/dev/pci/if_bnxreg.h
 cvs rdiff -u -r1.2.8.1 -r1.2.8.2 src/sys/dev/pci/if_bnxvar.h
 
 Please note that diffs are not public domain; they are subject to the
 copyright notices on the relevant files.