NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

kern/47537: ALC888 won't play music on audio jack



>Number:         47537
>Category:       kern
>Synopsis:       ALC888 won't play music on audio jack
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Wed Feb 06 21:00:00 +0000 2013
>Originator:     Julian Fagir
>Release:        6.0.1
>Organization:
>Environment:
NetBSD pizza.afra-berlin.de 6.0.1 NetBSD 6.0.1 (GENERIC) i386
>Description:
When setting up a Zotac ZBOXHD-ID11 to be a music player, it doesn't output 
anything through the audio jack.
>How-To-Repeat:
Here the output of mixerctl:
pizza# mixerctl -a -v
inputs.reclvl=88,88 volume delta=8
inputs.reclvl.mute=off  [ off on ]
inputs.record=184,184 volume delta=8
inputs.record.mute=off  [ off on ]
inputs.beep=184,184 volume delta=8
inputs.beep.mute=off  [ off on ]
outputs.master=248,248 volume delta=8
outputs.master2=128,128 volume delta=256
outputs.master2.mute=off  [ off on ]
outputs.master3=128,128 volume delta=256
outputs.master3.mute=off  [ off on ]
outputs.master4=128,128 volume delta=256
outputs.master4.mute=off  [ off on ]
record.mic=0,0 volume delta=64
record.mic2=0,0 volume delta=256
record.mic2.mute=off  [ off on ]
inputs.beep2=0,0 volume delta=256
inputs.beep2.mute=off  [ off on ]
inputs.record2=0,0 volume delta=256
inputs.record2.mute=off  [ off on ]
outputs.dacsel=DAC00,DIG01  { DAC00 DIG01 }
record.source=ADC02  { ADC02 }



Here a dmesg:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0.1 (GENERIC)
total memory = 2046 MB
avail memory = 1999 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Atom(TM) CPU D510   @ 1.66GHz, id 0x106ca
cpu1 at mainbus0 apid 2: Intel(R) Atom(TM) CPU D510   @ 1.66GHz, id 0x106ca
cpu2 at mainbus0 apid 1: Intel(R) Atom(TM) CPU D510   @ 1.66GHz, id 0x106ca
cpu3 at mainbus0 apid 3: Intel(R) Atom(TM) CPU D510   @ 1.66GHz, id 0x106ca
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <082510,XSDT0909,20100825>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
MCH (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
RMSC (PNP0C02) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
SIOR (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0xa000 (rev. 0x02)
agp0 at pchb0: can't find internal VGA device config space
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdafg0 at hdaudio0: Realtek ALC888
hdafg0: DAC00 2ch: Speaker [Jack]
hdafg0: DIG01 2ch: SPDIF Out [Jack]
hdafg0: ADC02 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci1 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 
0x03)
re0: interrupting at ioapic0 pin 16
re0: Ethernet address 00:01:2e:bc:45:53
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x02)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ath0 at pci2 dev 0 function 0: Atheros 9285
ath0: interrupting at ioapic0 pin 17
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 
36Mbps 48Mbps 54Mbps
ath0: mac 192.2 phy 14.0 radio 12.0
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x27d4 (rev. 0x02)
ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vga1 at pci3 dev 0 function 0: vendor 0x10de product 0x0a64 (rev. 0xa2)
vga1: WARNING: ignoring 64-bit BAR @ 0x14
vga1: WARNING: ignoring 64-bit BAR @ 0x1c
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
hdaudio1 at pci3 dev 0 function 1: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 18
hdafg1 at hdaudio1: NVIDIA GT21x HDMI
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
hdafg2 at hdaudio1: NVIDIA GT21x HDMI
hdafg2: DP00 8ch: Digital Out [Jack]
hdafg2: 8ch/0ch 48000Hz PCM16*
hdafg3 at hdaudio1: NVIDIA GT21x HDMI
hdafg3: DP00 8ch: Digital Out [Jack]
hdafg3: 8ch/0ch 48000Hz PCM16*
hdafg4 at hdaudio1: NVIDIA GT21x HDMI
hdafg4: DP00 8ch: Digital Out [Jack]
hdafg4: 8ch/0ch 48000Hz PCM16*
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x27bc (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
gpio0 at ichlpcib0: 64 pins
piixide0 at pci0 dev 31 function 2: Intel 82801GB/GR Serial ATA/Raid Controller 
(ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to native-PCI mode
piixide0: using ioapic0 pin 19 for native-PCI interrupt
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to native-PCI mode
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
pckbc0 at isa0 port 0x60-0x64
isapnp0 at isa0 port 0x279
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhub5 at uhub4 port 5: vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/77.63, 
addr 2
uhub5: single transaction translator
uhub5: 4 ports with 4 removable, self powered
wd0 at atabus0 drive 0
wd0: <SAMSUNG HM500JI>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhidev0 at uhub5 port 1 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 3, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub5 port 2 configuration 1 interface 0
uhidev1: vendor 0x046a wired keyboard, rev 2.00/1.03, addr 4, iclass 3/1
ukbd0 at uhidev1
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub5 port 2 configuration 1 interface 1
uhidev2: vendor 0x046a wired keyboard, rev 2.00/1.03, addr 4, iclass 3/0
uhidev2: 2 report ids
uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
WARNING: clock gained 11 days
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
>Fix:



Home | Main Index | Thread Index | Old Index