Re: kern/47406: Keyboard doesn't work when doing boot -a

[Nick Hudson <nick.hudson%gmx.co.uk@localhost>]

Full dmesg of machine with the problem


kenny$dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0_RC2 (PAVILION) #0: Sat Sep 22 14:39:24 BST 2012
        nick@kenny:/u/obj/amd64/usr/src/sys/arch/amd64/compile/PAVILION
total memory = 1983 MB
avail memory = 1911 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
HP Pavilion 061 RJ058AA-ABU a1629.uk (0nx0111RE101ASTE300)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Pentium(R) D CPU 2.80GHz, id 0xf47
cpu1 at mainbus0 apid 1: Intel(R) Pentium(R) D CPU 2.80GHz, id 0xf47
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 21, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <HP-CPC,OEMRSDT ,09000605>, AslId <MSFT,00000097>
ACPI Error: Method parse/execution failed [\_PR_.CPU1._PDC] (Node 
0xfffffe807be846c8), AE_INVALID_TABLE_LENGTH (20110623/psparse-560)
ACPI Error: Method parse/execution failed [\_PR_.CPU2._PDC] (Node 
0xfffffe807be847e8), AE_INVALID_TABLE_LENGTH (20110623/psparse-560)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
FDC (PNP0700) at acpi0 not configured
LPTE (PNP0401) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
SIOR (PNP0C02) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
AWY (AWY0001) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1002 product 0x5a33 (rev. 0x01)
ppb0 at pci0 dev 1 function 0: vendor 0x1002 product 0x5a3f (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 5 function 0: vendor 0x1002 product 0x5a61 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ixpide0 at pci0 dev 17 function 0: ATI Technologies IXP IDE Controller (rev. 
0x80)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to native-PCI mode
ixpide0: using ioapic0 pin 23 for native-PCI interrupt
atabus0 at ixpide0 channel 0
ixpide0: secondary channel configured to native-PCI mode
atabus1 at ixpide0 channel 1
ixpide1 at pci0 dev 18 function 0: ATI Technologies IXP IDE Controller (rev. 
0x80)
ixpide1: bus-master DMA support present
ixpide1: primary channel configured to native-PCI mode
ixpide1: using ioapic0 pin 22 for native-PCI interrupt
atabus2 at ixpide1 channel 0
ixpide1: secondary channel configured to native-PCI mode
atabus3 at ixpide1 channel 1
ohci0 at pci0 dev 19 function 0: vendor 0x1002 product 0x4374 (rev. 0x80)
ohci0: interrupting at ioapic0 pin 19
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 19 function 1: vendor 0x1002 product 0x4375 (rev. 0x80)
ohci1: interrupting at ioapic0 pin 19
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 19 function 2: vendor 0x1002 product 0x4373 (rev. 0x80)
ehci0: interrupting at ioapic0 pin 19
ehci0: dropped intr workaround enabled
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 4 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4372 (rev. 0x81)
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
ixpide2 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 
0x80)
ixpide2: bus-master DMA support present
ixpide2: primary channel configured to compatibility mode
ixpide2: primary channel interrupting at ioapic0 pin 14
atabus4 at ixpide2 channel 0
ixpide2: secondary channel configured to compatibility mode
ixpide2: secondary channel interrupting at ioapic0 pin 15
atabus5 at ixpide2 channel 1
hdaudio0 at pci0 dev 20 function 2: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdafg0 at hdaudio0: Realtek ALC888
hdafg0: duplicate pin in association
hdafg0: DAC00 8ch: Speaker [Jack]
hdafg0: DAC01 2ch: HP Out [Jack]
hdafg0: DIG02 2ch: SPDIF Out [Jack]
hdafg0: ADC04 2ch: Mic In [Jack]
hdafg0: 8ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x4377 (rev. 0x80)
ppb1 at pci0 dev 20 function 4: vendor 0x1002 product 0x4371 (rev. 0x80)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
rtk0 at pci2 dev 5 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 20
rtk0: Ethernet address 00:19:21:4e:16:83
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fwohci0 at pci2 dev 6 function 0: vendor 0x1106 product 0x3044 (rev. 0xc0)
fwohci0: interrupting at ioapic0 pin 23
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:0a:e6:ff:67:30:40
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu1 at cpu1: ACPI CPU
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2799436220 Hz quality 3000
uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
uhub2 at usb2: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
umass0 at uhub2 port 8 configuration 1 interface 0
umass0: Generic USB2.0-CRW, rev 2.00/11.0d, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 4 luns per target
sd0 at scsibus0 target 0 lun 0: <Generic-, Compact Flash, 1.00> disk removable
sd0: drive offline
sd0: unable to open device, error = 19
sd1 at scsibus0 target 0 lun 1: <Generic-, SM/xD-Picture, 1.00> disk removable
sd1: drive offline
sd1: unable to open device, error = 19
sd2 at scsibus0 target 0 lun 2: <Generic-, SD/MMC, 1.00> disk removable
sd2: drive offline
sd2: unable to open device, error = 19
sd3 at scsibus0 target 0 lun 3: <Generic-, MS/MS-Pro, 1.00> disk removable
sd3: drive offline
sd3: unable to open device, error = 19
wd0 at atabus2 drive 0
wd0: <ST3200827AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 186 GB, 387621 cyl, 16 head, 63 sec, 512 bytes/sect x 390721968 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ixpide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus5: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STDVDRRW GSA-H20L, , S742> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(ixpide2:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)