port-amd64/47026: USB Controller (ohci) hangs/reboots computer

[tobias%iso100.se@localhost]

>Number:         47026
>Category:       port-amd64
>Synopsis:       USB Controller (ohci) hangs/reboots computer
>Confidential:   no
>Severity:       critical
>Priority:       medium
>Responsible:    port-amd64-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Mon Oct 01 17:20:00 +0000 2012
>Originator:     Tobias Astrom
>Release:        6.0_RC2
>Organization:
>Environment:
NetBSD yoda.kyrkofjall.se 6.0_RC2 NetBSD 6.0_RC2 (GENERIC) amd64
>Description:
OHCI(4) (probably) cause the computer to hang or reboot. It produces a lot of 
warnings while the computer runs, and usually it hangs or reboots itself after 
a couple of hours. (approx. 2-10)

With bios set to disable the USB device, the computer has never crashed, and 
have been running for weeks.

Warnings from syslog:

Oct  1 18:51:15 yoda /netbsd: ohci0: WARNING: addr 0x00aa65d0 not found
Oct  1 18:51:15 yoda /netbsd: ohci0: WARNING: addr 0x00aa59a0 not found
Oct  1 18:51:15 yoda /netbsd: ohci0: 1 scheduling overruns
Oct  1 18:51:15 yoda /netbsd: ohci0: WARNING: addr 0x00ab4030 not found
Oct  1 18:51:15 yoda /netbsd: ohci0: WARNING: addr 0x00ef0930 not found
Oct  1 18:51:15 yoda /netbsd: ohci0: WARNING: addr 0x00f272c0 not found
Oct  1 18:51:15 yoda /netbsd: ohci0: WARNING: addr 0x00aa64f0 not found
Oct  1 18:51:15 yoda /netbsd: ohci0: WARNING: addr 0x00aa6330 not found
Oct  1 18:51:15 yoda /netbsd: ohci0: WARNING: addr 0x00a4e610 not found
Oct  1 18:51:15 yoda /netbsd: ohci0: WARNING: addr 0x00aa66b0 not found
Oct  1 18:51:15 yoda /netbsd: ohci0: WARNING: addr 0x00aa74d0 not found
Oct  1 18:51:15 yoda /netbsd: ohci0: 8 scheduling overruns
Oct  1 18:51:31 yoda syslogd[172]: last message repeated 63 times
Oct  1 18:51:31 yoda /netbsd: ohci0: WARNING: addr 0x02503710 not found
Oct  1 18:51:31 yoda /netbsd: ohci0: WARNING: addr 0x02503890 not found
Oct  1 18:51:31 yoda /netbsd: ohci0: WARNING: addr 0x02503690 not found
Oct  1 18:51:31 yoda /netbsd: ohci0: WARNING: addr 0x02503750 not found
Oct  1 18:51:31 yoda /netbsd: ohci0: WARNING: addr 0x02503650 not found
Oct  1 18:51:31 yoda /netbsd: ohci0: WARNING: addr 0x025036d0 not found
Oct  1 18:51:32 yoda /netbsd: ohci0: 8 scheduling overruns
Oct  1 18:52:03 yoda /netbsd: ohci0: 8 scheduling overruns
Oct  1 18:54:04 yoda /netbsd: ohci0: 8 scheduling overruns


dmesg:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0_RC2 (GENERIC)
total memory = 16366 MB
avail memory = 15876 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
System manufacturer System Product Name (System Version)
mainbus0 (root)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 
0x0000000000000000/0x1 (20110623/tbfadt-586)
cpu0 at mainbus0 apid 16: AMD FX(tm)-6100 Six-Core Processor             , id 
0x600f12
cpu0: SVM disabled by the BIOS
cpu1 at mainbus0 apid 17: AMD FX(tm)-6100 Six-Core Processor             , id 
0x600f12
cpu2 at mainbus0 apid 18: AMD FX(tm)-6100 Six-Core Processor             , id 
0x600f12
cpu3 at mainbus0 apid 19: AMD FX(tm)-6100 Six-Core Processor             , id 
0x600f12
cpu4 at mainbus0 apid 20: AMD FX(tm)-6100 Six-Core Processor             , id 
0x600f12
cpu5 at mainbus0 apid 21: AMD FX(tm)-6100 Six-Core Processor             , id 
0x600f12
ioapic0 at mainbus0 apid 22: pa 0xfec00000, version 21, 24 pins
ioapic0: can't remap to apid 22
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <092211,XSDT0958,20110922>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
BROD (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
LPTE (PNP0400) at acpi0 not configured
aibs0 at acpi0 (ASOC, ATK0110-16843024): ASUSTeK AI Booster
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
UAR1 (PNP0501) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
SIOR (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpiwmi0 at acpi0 (AOD, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x9600 (rev. 0x00)
ppb0 at pci0 dev 2 function 0: vendor 0x1022 product 0x9603 (rev. 0x00)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x954f (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI Radeon HD 4350
radeondrm0: Initialized radeon 1.29.0 20080613
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 19
hdafg0 at hdaudio0: ATI R6xx HDMI
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
ppb1 at pci0 dev 4 function 0: vendor 0x1022 product 0x9604 (rev. 0x00)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 
0x06)
re0: interrupting at ioapic0 pin 16
re0: Ethernet address c8:60:00:54:2d:86
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 5
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ixpide0 at pci0 dev 17 function 0: ATI Technologies IXP IDE Controller (rev. 
0x00)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to native-PCI mode
ixpide0: using ioapic0 pin 22 for native-PCI interrupt
atabus0 at ixpide0 channel 0
ixpide0: secondary channel configured to native-PCI mode
atabus1 at ixpide0 channel 1
ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 16
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 18 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 16
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
ohci2 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb3 at ohci2: USB revision 1.0
ohci3 at pci0 dev 19 function 1: vendor 0x1002 product 0x4398 (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb4 at ohci3: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci1: interrupting at ioapic0 pin 19
ehci1: dropped intr workaround enabled
ehci1: EHCI version 1.0
ehci1: companion controllers, 3 ports each: ohci2 ohci3
usb5 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4385 (rev. 0x3c)
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
ixpide1 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 
0x00)
ixpide1: bus-master DMA support present
ixpide1: primary channel configured to compatibility mode
ixpide1: primary channel interrupting at ioapic0 pin 14
atabus2 at ixpide1 channel 0
ixpide1: secondary channel configured to compatibility mode
ixpide1: secondary channel interrupting at ioapic0 pin 15
atabus3 at ixpide1 channel 1
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 16
hdafg1 at hdaudio1: Realtek ALC887
hdafg1: DAC00 2ch: Speaker [Jack]
hdafg1: DAC01 2ch: HP Out [Jack]
hdafg1: DIG02 2ch: SPDIF Out [Built-In]
hdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack]
hdafg1: ADC04 2ch: Mic In [Jack]
hdafg1: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 
PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, independent
pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x439d (rev. 0x00)
ppb2 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
ohci4 at pci0 dev 20 function 5: vendor 0x1002 product 0x4399 (rev. 0x00)
ohci4: interrupting at ioapic0 pin 18
ohci4: OHCI version 1.0, legacy support
usb6 at ohci4: USB revision 1.0
pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1600 (rev. 0x00)
pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1601 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1602 (rev. 0x00)
pchb4 at pci0 dev 24 function 3: vendor 0x1022 product 0x1603 (rev. 0x00)
amdtemp0 at pchb4: AMD CPU Temperature Sensors (Family15h)
pchb5 at pci0 dev 24 function 4: vendor 0x1022 product 0x1604 (rev. 0x00)
pchb6 at pci0 dev 24 function 5: vendor 0x1022 product 0x1605 (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: C2: I/O, lat 100 us, pow     0 mW
acpicpu0: P0: FFH, lat   4 us, pow 14715 mW, 3300 MHz
acpicpu0: P1: FFH, lat   4 us, pow 11730 mW, 3000 MHz
acpicpu0: P2: FFH, lat   4 us, pow  7935 mW, 2400 MHz
acpicpu0: P3: FFH, lat   4 us, pow  4920 mW, 1800 MHz
acpicpu0: P4: FFH, lat   4 us, pow  3330 mW, 1400 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
acpicpu4 at cpu4: ACPI CPU
acpicpu5 at cpu5: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
ERROR: 3855 cycle TSC drift observed
uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
uhub3 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 3 ports with 3 removable, self powered
uhub5 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 6 ports with 6 removable, self powered
uhub6 at usb6: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
wd0 at atabus0 drive 0
wd0: <KINGSTON SVP200S360G>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57241 MB, 116301 cyl, 16 head, 63 sec, 512 bytes/sect x 117231408 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1 at atabus0 drive 1
wd1: <ST3500841AS>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1(ixpide0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhidev0 at uhub3 port 2 configuration 1 interface 0
uhidev0: Logitech USB Receiver, rev 2.00/12.01, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 2 configuration 1 interface 1
uhidev1: Logitech USB Receiver, rev 2.00/12.01, addr 2, iclass 3/1
uhidev1: 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, W and Z dirs
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub3 port 2 configuration 1 interface 2
uhidev2: Logitech USB Receiver, rev 2.00/12.01, addr 2, iclass 3/0
uhidev2: 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
>How-To-Repeat:
Use the same hardware and keep the computer running..
>Fix: