NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: port-sparc64/46461: Sun E450 drops to DDB on boot of 6.0_BETA



The following reply was made to PR port-sparc64/46461; it has been noted by 
GNATS.

From: Havard Eidnes <he%NetBSD.org@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc: 
Subject: Re: port-sparc64/46461: Sun E450 drops to DDB on boot of 6.0_BETA
Date: Thu, 17 May 2012 23:46:21 +0200 (CEST)

 Here's the dmesg from 5.99.38.
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009, 2010
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 5.99.38 (TORBIDINSU) #1: Wed Sep  1 09:44:14 CEST 2010
        
he%torbidinsu.urc.uninett.no@localhost:/usr/obj/sys/arch/sparc64/compile/TORBIDINSU
 total memory = 4096 MB
 avail memory = 4010 MB
 timecounter: Timecounters tick every 10.000 msec
 mainbus0 (root): SUNW,Ultra-4 (Sun Enterprise 450): hostid 80b147ad
 cpu0 at mainbus0: SUNW,UltraSPARC-II @ 400 MHz, UPA id 0
 cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 4096K external (64 b/l)
 cpu1 at mainbus0: SUNW,UltraSPARC-II @ 400 MHz, UPA id 1
 cpu1: 16K instruction (32 b/l), 16K data (32 b/l), 4096K external (64 b/l)
 cpu2 at mainbus0: SUNW,UltraSPARC-II @ 400 MHz, UPA id 2
 cpu2: 16K instruction (32 b/l), 16K data (32 b/l), 4096K external (64 b/l)
 cpu3 at mainbus0: SUNW,UltraSPARC-II @ 400 MHz, UPA id 3
 cpu3: 16K instruction (32 b/l), 16K data (32 b/l), 4096K external (64 b/l)
 psycho0 at mainbus0 addr 0xfffb4000
 psycho0: SUNW,psycho: impl 0, version 4: ign 7c0 bus range 0 to 0; PCI bus 0
 pci0 at psycho0
 pci0: i/o space, memory space enabled
 ebus0 at pci0 dev 1 function 0
 ebus0: Sun Microsystems PCIO Ebus2, revision 0x01
 auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 
72c000-72c003, 72f000-72f003
 power at ebus0 addr 724000-724003 ipl 2021 ipl 2034 not configured
 SUNW,pll at ebus0 addr 504000-504002 not configured
 sc at ebus0 addr 500000-500007 not configured
 sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2
 sabtty0 at sab0 port 0: console i/o
 sabtty1 at sab0 port 1
 com0 at ebus0 addr 3083f8-3083ff ipl 41: ns16550a, working fifo
 kbd0 at com0
 com1 at ebus0 addr 3062f8-3062ff ipl 42: ns16550a, working fifo
 ms0 at com1
 wsmouse0 at ms0 mux 0
 lpt0 at ebus0 addr 3043bc-3043cb, 300398-300399, 700000-70000f ipl 2018
 fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 2023 not 
configured
 clock0 at ebus0 addr 0-1fff: mk48t59
 flashprom at ebus0 addr 0-fffff, 0-fffff not configured
 pcfiic0 at ebus0 addr 600000-600003 ipl 2024 ipl 2021
 iic0 at pcfiic0: I2C bus
 ecadc0 at iic0 addr 0x48: PSU-1 Temp Sensors
 ecadc1 at iic0 addr 0x49: PSU-2 Temp Sensors
 ecadc2 at iic0 addr 0x4a: read failed
 lmtemp0 at iic0 addr 0x4d: ambient LM75 Temperature Sensor
 ecadc3 at iic0 addr 0x4f: CPU Temp Sensors
 hme0 at pci0 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1
 hme0: interrupting at ivec 37e1
 hme0: Ethernet address 08:00:20:b1:47:ad
 nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 esiop0 at pci0 dev 3 function 0: Symbios Logic 53c875 (ultra-wide scsi)
 esiop0: using on-board RAM
 esiop0: interrupting at ivec 1fe0
 scsibus0 at esiop0: 16 targets, 8 luns per target
 esiop1 at pci0 dev 2 function 0: Symbios Logic 53c875 (ultra-wide scsi)
 esiop1: using on-board RAM
 esiop1: interrupting at ivec 1fe6
 scsibus1 at esiop1: 16 targets, 8 luns per target
 psycho1 at mainbus0 addr 0xfffc6000
 psycho1: SUNW,psycho: impl 0, version 4: ign 7c0 bus range 128 to 128; PCI bus 
128
 pci1 at psycho1
 pci1: i/o space, memory space enabled
 timer0 at mainbus0 addr 0xfff9fc00 irq vectors 7ec
 mc at mainbus0 not configured
 psycho2 at mainbus0 addr 0xfff5e000
 psycho2: SUNW,psycho: impl 0, version 4: ign 100 bus range 0 to 0; PCI bus 0
 pci2 at psycho2
 pci2: i/o space, memory space enabled
 psycho3 at mainbus0 addr 0xfff70000
 psycho3: SUNW,psycho: impl 0, version 4: ign 100 bus range 128 to 128; PCI bus 
128
 pci3 at psycho3
 pci3: i/o space, memory space enabled
 psycho4 at mainbus0 addr 0xfff36000
 psycho4: SUNW,psycho: impl 0, version 4: ign 180 bus range 0 to 0; PCI bus 0
 pci4 at psycho4
 pci4: i/o space, memory space enabled
 pm2fb0 at pci4 dev 4 function 0: 3D Labs GLINT Permedia 2V
 pm2fb0: no width property
 psycho5 at mainbus0 addr 0xfff48000
 psycho5: SUNW,psycho: impl 0, version 4: ign 180 bus range 128 to 128; PCI bus 
128
 pci5 at psycho5
 pci5: i/o space, memory space enabled
 pcons at mainbus0 not configured
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 timecounter: Timecounter "tick-counter" frequency 400000000 Hz quality 100
 timecounter: Timecounter "counter-timer" frequency 1000000 Hz quality 200
 scsibus0: waiting 2 seconds for devices to settle...
 wskbd0 at kbd0 mux 1
 scsibus1: waiting 2 seconds for devices to settle...
 sd0 at scsibus0 target 0 lun 0: <FUJITSU, MAJ3182M SUN18G, 0804> disk fixed
 sd0: 17274 MB, 7508 cyl, 19 head, 248 sec, 512 bytes/sect x 35378533 sectors
 sd0: sync (50.00ns offset 16), 16-bit (40.000MB/s) transfers, tagged queueing
 sd1 at scsibus0 target 1 lun 0: <FUJITSU, MAJ3182M SUN18G, 0804> disk fixed
 sd1: 17274 MB, 7508 cyl, 19 head, 248 sec, 512 bytes/sect x 35378533 sectors
 sd1: sync (50.00ns offset 16), 16-bit (40.000MB/s) transfers, tagged queueing
 kbd0: reset failed
 cd0 at scsibus1 target 6 lun 0: <TOSHIBA, XM6201TASUN32XCD, 1103> cdrom 
removable
 cd0: sync (100.00ns offset 16), 8-bit (10.000MB/s) transfers
 Kernelized RAIDframe activated
 root on sd0a dumps on sd0b
 root file system type: ffs
 


Home | Main Index | Thread Index | Old Index