NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: install/46287: Sysinst halts at root: when booting ISO from PATA DVD drive



The following reply was made to PR install/46287; it has been noted by GNATS.

From: Gerard Lally <gerard%netmail.ie@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: install-manager%netbsd.org@localhost, gnats-admin%netbsd.org@localhost,
 netbsd-bugs%netbsd.org@localhost
Subject: Re: install/46287: Sysinst halts at root: when booting ISO from
 PATA DVD drive
Date: Tue, 3 Apr 2012 02:25:57 +0100

 --MP_/ll6o+5KI61uWD517wNHbiMT
 Content-Type: text/plain; charset=US-ASCII
 Content-Transfer-Encoding: 7bit
 Content-Disposition: inline
 
 On Tue,  3 Apr 2012 01:00:08 +0000 (UTC)
 Gerard Lally <gerard%netmail.ie@localhost> wrote:
 
 > The following reply was made to PR install/46287; it has been noted
 > by GNATS.
 > 
 > From: Gerard Lally <gerard%netmail.ie@localhost>
 > To: gnats-bugs%NetBSD.org@localhost
 > Cc: 
 > Subject: Re: install/46287: Sysinst halts at root: when booting ISO
 > from PATA DVD drive
 > Date: Tue, 3 Apr 2012 01:57:47 +0100
 > 
 >  On Mon,  2 Apr 2012 08:30:06 +0000 (UTC)
 >  Martin Husemann <martin%duskware.de@localhost> wrote:
 >  
 >  > The following reply was made to PR install/46287; it has been noted
 >  > by GNATS.
 >  > 
 >  > From: Martin Husemann <martin%duskware.de@localhost>
 >  > To: gnats-bugs%NetBSD.org@localhost
 >  > Cc: 
 >  > Subject: Re: install/46287: Sysinst halts at root: when booting ISO
 >  > from PATA DVD drive Date: Mon, 2 Apr 2012 10:27:51 +0200
 >  > 
 >  >  On Mon, Apr 02, 2012 at 08:25:01AM +0000, Martin Husemann wrote:
 >  >  >  This controller does not show up (unless I overlooked it) - if
 >  >  > it is easy, would you be able to also provide the NetBSD 5.1
 >  >  > dmesg? You said it worked with that, so it should be listed
 >  >  > there.
 >  >  
 >  >  Oh, I overlooked a possibility: it could be that the DVD drive did
 >  > not show up on NetBSD 5.1 either - but it was not needed there, due
 >  > to the memdisk based installer root filesystem.
 >  >  
 >  >  Do you remember if you ever used the cd/dvd device there? Anyway,
 >  > a dmesg would be helpfull.
 >  
 >  
 >  I installed NetBSD amd64 5.1.2 tonight and I have some files for you.
 >  
 >  First of all - some content I neglected to include in the bug report:
 >  
 >  NetBSD netbsd.abalta.dnsalias.net 5.1.2 NetBSD 5.1.2 (GENERIC) #0:
 > Thu Feb  2 12:12:28 UTC 2012
 >  
 > builds%b7.netbsd.org@localhost:/home/builds/ab/netbsd-5-1-2-RELEASE/amd64/201202021012Z-obj/home/builds/ab/netbsd-5-1-2-RELEASE/src/sys/arch/amd64/compile/GENERIC
 >  amd64
 >  
 >  
 >  Now the contents of dmesg 1 and 2.
 
 
 Sorry - I'm still getting used to this.
 
 These don't seem to be formatted properly.
 
 Properly formatted dmesg NetBSD 5.1.2 and dmesg NetBSD 6.0 BETA
 attached.
 --MP_/ll6o+5KI61uWD517wNHbiMT
 Content-Type: text/plain
 Content-Transfer-Encoding: 7bit
 Content-Disposition: attachment; filename=dmesg-beta.txt
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009, 2010, 2011, 2012
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 6.0_BETA (GENERIC)
 total memory = 8191 MB
 avail memory = 7937 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 System manufacturer P5K SE/EPU (System Version)
 mainbus0 (root)
 cpu0 at mainbus0 apid 0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz, id 
0x6fb
 cpu1 at mainbus0 apid 1: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz, id 
0x6fb
 cpu2 at mainbus0 apid 2: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz, id 
0x6fb
 cpu3 at mainbus0 apid 3: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz, id 
0x6fb
 ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
 acpi0 at mainbus0: Intel ACPICA 20110623
 acpi0: X/RSDT: OemId <A_M_I_,OEMRSDT ,10000820>, AslId <MSFT,00000097>
 ACPI Warning: Incorrect checksum in table [OEMB] - 0x66, should be 0x5D 
(20110623/tbutils-282)
 acpi0: SCI interrupting at int 9
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
 timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
 MCH (PNP0C01) at acpi0 not configured
 attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
 midi0 at pcppi1: PC speaker
 sysbeep0 at pcppi1
 FDC (PNP0700) at acpi0 not configured
 SIOR (PNP0C02) at acpi0 not configured
 RMSC (PNP0C02) at acpi0 not configured
 aibs0 at acpi0 (ASOC, ATK0110-16843024): ASUSTeK AI Booster
 UAR1 (PNP0501) at acpi0 not configured
 OMSC (PNP0C02) at acpi0 not configured
 pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
 PCIE (PNP0C02) at acpi0 not configured
 RMEM (PNP0C01) at acpi0 not configured
 acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
 attimer1: attached to pcppi1
 pckbd0 at pckbc1 (kbd slot)
 pckbc1: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x29c0 (rev. 0x02)
 agp0 at pchb0: can't find internal VGA device config space
 ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x29c1 (rev. 0x02)
 ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x7183 (rev. 0x00)
 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 radeondrm0 at vga0: ATI Radeon X1300/X1550
 radeondrm0: Initialized radeon 1.29.0 20080613
 vendor 0x1002 product 0x71a3 (miscellaneous display) at pci1 dev 0 function 1 
not configured
 uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x02)
 uhci0: interrupting at ioapic0 pin 16
 usb0 at uhci0: USB revision 1.0
 uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x02)
 uhci1: interrupting at ioapic0 pin 21
 usb1 at uhci1: USB revision 1.0
 uhci2 at pci0 dev 26 function 2: vendor 0x8086 product 0x2939 (rev. 0x02)
 uhci2: interrupting at ioapic0 pin 18
 usb2 at uhci2: USB revision 1.0
 ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x02)
 ehci0: interrupting at ioapic0 pin 18
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
 usb3 at ehci0: USB revision 2.0
 hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
 hdaudio0: interrupting at ioapic0 pin 22
 hdafg0 at hdaudio0: Realtek ALC883
 hdafg0: DAC00 8ch: Speaker [Jack]
 hdafg0: DAC01 2ch: HP Out [Jack]
 hdafg0: DIG02 2ch: SPDIF Out [Jack]
 hdafg0: ADC03 2ch: Line In [Jack], Mic In [Jack]
 hdafg0: ADC04 2ch: Mic In [Jack]
 hdafg0: 8ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
 audio0 at hdafg0: full duplex, playback, capture, independent
 ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x2940 (rev. 0x02)
 ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci2 at ppb1 bus 4
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb2 at pci0 dev 28 function 4: vendor 0x8086 product 0x2948 (rev. 0x02)
 ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci3 at ppb2 bus 3
 pci3: i/o space, memory space enabled, rd/line, wr/inv ok
 ahcisata0 at pci3 dev 0 function 0: vendor 0x11ab product 0x6121 (rev. 0xb2)
 ahcisata0: interrupting at ioapic0 pin 16
 ahcisata0: 64-bit DMA
 ahcisata0: AHCI revision 1.0, 3 ports, 32 slots, CAP 
0xca227f02<PSC,SSC,SPM,ISS=0x2=Gen2,SAL,SSS,SNCQ,S64A>
 atabus0 at ahcisata0 channel 0
 atabus1 at ahcisata0 channel 1
 atabus2 at ahcisata0 channel 2
 ppb3 at pci0 dev 28 function 5: vendor 0x8086 product 0x294a (rev. 0x02)
 ppb3: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci4 at ppb3 bus 2
 pci4: i/o space, memory space enabled, rd/line, wr/inv ok
 age0 at pci4 dev 0 function 0: Attansic/Atheros L1 Gigabit Ethernet
 age0: ioapic0 pin 17
 age0: Ethernet address 00:22:15:4b:cb:39
 atphy0 at age0 phy 0: L1 10/100/1000 PHY, rev. 5
 atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
 uhci3 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x02)
 uhci3: interrupting at ioapic0 pin 23
 usb4 at uhci3: USB revision 1.0
 uhci4 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x02)
 uhci4: interrupting at ioapic0 pin 19
 usb5 at uhci4: USB revision 1.0
 uhci5 at pci0 dev 29 function 2: vendor 0x8086 product 0x2936 (rev. 0x02)
 uhci5: interrupting at ioapic0 pin 18
 usb6 at uhci5: USB revision 1.0
 ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x02)
 ehci1: interrupting at ioapic0 pin 23
 ehci1: EHCI version 1.0
 ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
 usb7 at ehci1: USB revision 2.0
 ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x92)
 pci5 at ppb4 bus 5
 pci5: i/o space, memory space enabled
 ahd0 at pci5 dev 0 function 0
 ahd0: Enabling 39Bit Addressing
 ahd0: interrupting at ioapic0 pin 16
 ahd0: aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66 MHz, 512 SCBs
 scsibus0 at ahd0: 16 targets, 8 luns per target
 pci_mem_find: expected type mem, found i/o
 viaide0 at pci5 dev 1 function 0: VIA Technologies VT6421 Serial ATA RAID 
Controller (rev. 0x50)
 viaide0: bus-master DMA support present
 viaide0: using ioapic0 pin 17 for native-PCI interrupt
 atabus3 at viaide0 channel 0
 atabus4 at viaide0 channel 1
 atabus5 at viaide0 channel 2
 ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2918 (rev. 0x02)
 timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
 ichlpcib0: 24-bit timer
 ichlpcib0: TCO (watchdog) timer configured.
 piixide0 at pci0 dev 31 function 2: Intel 82801I Serial ATA Controller (ICH9) 
(rev. 0x02)
 piixide0: bus-master DMA support present
 piixide0: primary channel configured to native-PCI mode
 piixide0: using ioapic0 pin 22 for native-PCI interrupt
 atabus6 at piixide0 channel 0
 piixide0: secondary channel configured to native-PCI mode
 atabus7 at piixide0 channel 1
 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2930 (rev. 0x02)
 ichsmb0: interrupting at ioapic0 pin 18
 iic0 at ichsmb0: I2C bus
 piixide1 at pci0 dev 31 function 5: Intel 82801I Serial ATA Controller (ICH9) 
(rev. 0x02)
 piixide1: bus-master DMA support present
 piixide1: primary channel wired to native-PCI mode
 piixide1: using ioapic0 pin 22 for native-PCI interrupt
 atabus8 at piixide1 channel 0
 piixide1: secondary channel wired to native-PCI mode
 atabus9 at piixide1 channel 1
 isa0 at ichlpcib0
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
 acpicpu0 at cpu0: ACPI CPU
 acpicpu0: C1: HLT, lat   0 us, pow     0 mW
 acpicpu0: P0: FFH, lat  10 us, pow 88000 mW, 2394 MHz
 acpicpu0: P1: FFH, lat  10 us, pow 56320 mW, 1596 MHz
 coretemp0 at cpu0: thermal sensor, 1 C resolution
 acpicpu1 at cpu1: ACPI CPU
 coretemp1 at cpu1: thermal sensor, 1 C resolution
 acpicpu2 at cpu2: ACPI CPU
 coretemp2 at cpu2: thermal sensor, 1 C resolution
 acpicpu3 at cpu3: ACPI CPU
 coretemp3 at cpu3: thermal sensor, 1 C resolution
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 timecounter: Timecounter "TSC" frequency 2400181200 Hz quality 3000
 scsibus0: waiting 2 seconds for devices to settle...
 uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub3: 6 ports with 6 removable, self powered
 uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub4: 2 ports with 2 removable, self powered
 uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub5: 2 ports with 2 removable, self powered
 uhub6 at usb6: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub6: 2 ports with 2 removable, self powered
 uhub7 at usb7: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub7: 6 ports with 6 removable, self powered
 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
 ehci0: handing over full speed device on port 6 to uhci2
 wd0 at atabus6 drive 0
 wd0: <WDC WD2500JS-00MHB0>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 wd1 at atabus8 drive 0
 wd1: <SAMSUNG HD502IJ>
 wd1: drive supports 16-sector PIO transfers, LBA48 addressing
 wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
 wd1: 32-bit data port
 wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
 wd1(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 wd2 at atabus9 drive 0
 wd2: <WDC WD6400AAKS-22A7B0>
 wd2: drive supports 16-sector PIO transfers, LBA48 addressing
 wd2: 596 GB, 1240341 cyl, 16 head, 63 sec, 512 bytes/sect x 1250263728 sectors
 wd2: 32-bit data port
 wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd2(piixide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 uhidev0 at uhub2 port 2 configuration 1 interface 0
 uhidev0: Logitech USB Gaming Mouse, rev 2.00/52.00, addr 2, iclass 3/1
 ums0 at uhidev0: 16 buttons, W and Z dirs
 wsmouse0 at ums0 mux 0
 uhidev1 at uhub2 port 2 configuration 1 interface 1
 uhidev1: Logitech USB Gaming Mouse, rev 2.00/52.00, addr 2, iclass 3/0
 uhidev1: 17 report ids
 uhid0 at uhidev1 reportid 16: input=6, output=6, feature=0
 uhid1 at uhidev1 reportid 17: input=19, output=19, feature=0
 Kernelized RAIDframe activated
 pad0: outputs: 44100Hz, 16-bit, stereo
 audio1 at pad0: half duplex, playback, capture
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 umass0 at uhub3 port 4 configuration 1 interface 0
 umass0: Corsair UFD, rev 2.00/1.00, addr 2
 umass0: using SCSI over Bulk-Only
 scsibus1 at umass0: 2 targets, 1 lun per target
 sd0 at scsibus1 target 0 lun 0: <Corsair, UFD, 0.00> disk removable
 sd0: 7712 MB, 500 cyl, 8 head, 32 sec, 512 bytes/sect x 15794176 sectors
 --MP_/ll6o+5KI61uWD517wNHbiMT
 Content-Type: text/plain
 Content-Transfer-Encoding: 7bit
 Content-Disposition: attachment; filename=dmesg-5-1-2.txt
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 5.1.2 (GENERIC) #0: Thu Feb  2 12:12:28 UTC 2012
        
builds%b7.netbsd.org@localhost:/home/builds/ab/netbsd-5-1-2-RELEASE/amd64/201202021012Z-obj/home/builds/ab/netbsd-5-1-2-RELEASE/src/sys/arch/amd64/compile/GENERIC
 total memory = 8191 MB
 avail memory = 7926 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 SMBIOS rev. 2.4 @ 0xf06e0 (61 entries)
 System manufacturer P5K SE/EPU (System Version)
 mainbus0 (root)
 cpu0 at mainbus0 apid 0: Intel 686-class, 2400MHz, id 0x6fb
 cpu1 at mainbus0 apid 1: Intel 686-class, 2400MHz, id 0x6fb
 cpu2 at mainbus0 apid 2: Intel 686-class, 2400MHz, id 0x6fb
 cpu3 at mainbus0 apid 3: Intel 686-class, 2400MHz, id 0x6fb
 ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
 acpi0 at mainbus0: Intel ACPICA 20080321
 acpi0: X/RSDT: OemId <A_M_I_,OEMRSDT ,10000820>, AslId <MSFT,00000097>
 acpi0: SCI interrupting at int 9
 acpi0: fixed-feature power button present
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 ACPI-Fast 24-bit timer
 attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
 midi0 at pcppi1: PC speaker (CPU-intensive output)
 sysbeep0 at pcppi1
 aiboost0 at acpi0 (ASOC, ATK0110-16843024)
 aiboost0: ASUS AI Boost Hardware monitor
 hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
 timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
 UAR1 (PNP0501) at acpi0 not configured
 pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
 acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
 attimer1: attached to pcppi1
 pckbd0 at pckbc1 (kbd slot)
 pckbc1: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: vendor 0x8086 product 0x29c0 (rev. 0x02)
 agp0 at pchb0: can't find internal VGA device config space
 ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x29c1 (rev. 0x02)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x7183 (rev. 0x00)
 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using
 wskbd0
 wsmux1: connecting to wsdisplay0
 drm at vga0 not configured
 vendor 0x1002 product 0x71a3 (miscellaneous display) at pci1 dev 0
 function 1 not configured
 uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x02)
 uhci0: interrupting at ioapic0 pin 16
 usb0 at uhci0: USB revision 1.0
 uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x02)
 uhci1: interrupting at ioapic0 pin 21
 usb1 at uhci1: USB revision 1.0
 uhci2 at pci0 dev 26 function 2: vendor 0x8086 product 0x2939 (rev. 0x02)
 uhci2: interrupting at ioapic0 pin 18
 usb2 at uhci2: USB revision 1.0
 ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x02)
 ehci0: interrupting at ioapic0 pin 18
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
 usb3 at ehci0: USB revision 2.0
 azalia0 at pci0 dev 27 function 0: Generic High Definition Audio
 Controller azalia0: interrupting at ioapic0 pin 22
 azalia0: host: 0x8086/0x293e (rev. 2), HDA rev. 1.0
 ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x2940 (rev. 0x02)
 pci2 at ppb1 bus 4
 pci2: memory space enabled, rd/line, wr/inv ok
 ppb2 at pci0 dev 28 function 4: vendor 0x8086 product 0x2948 (rev. 0x02)
 pci3 at ppb2 bus 3
 pci3: i/o space, memory space enabled, rd/line, wr/inv ok
 pciide0 at pci3 dev 0 function 0
 pciide0: vendor 0x11ab product 0x6121 (rev. 0xb2)
 pciide0: bus-master DMA support present, but unused (no driver support)
 pciide0: primary channel configured to native-PCI mode
 pciide0: using ioapic0 pin 16 for native-PCI interrupt
 atabus0 at pciide0 channel 0
 pciide0: secondary channel configured to native-PCI mode
 atabus1 at pciide0 channel 1
 ppb3 at pci0 dev 28 function 5: vendor 0x8086 product 0x294a (rev. 0x02)
 pci4 at ppb3 bus 2
 pci4: memory space enabled, rd/line, wr/inv ok
 age0 at pci4 dev 0 function 0: Attansic/Atheros L1 Gigabit Ethernet
 age0: ioapic0 pin 17
 age0: Ethernet address 00:22:15:4b:cb:39
 atphy0 at age0 phy 0: L1 10/100/1000 PHY, rev. 5
 atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
 uhci3 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x02)
 uhci3: interrupting at ioapic0 pin 23
 usb4 at uhci3: USB revision 1.0
 uhci4 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x02)
 uhci4: interrupting at ioapic0 pin 19
 usb5 at uhci4: USB revision 1.0
 uhci5 at pci0 dev 29 function 2: vendor 0x8086 product 0x2936 (rev. 0x02)
 uhci5: interrupting at ioapic0 pin 18
 usb6 at uhci5: USB revision 1.0
 ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x02)
 ehci1: interrupting at ioapic0 pin 23
 ehci1: EHCI version 1.0
 ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
 usb7 at ehci1: USB revision 2.0
 ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x92)
 pci5 at ppb4 bus 5
 pci5: i/o space, memory space enabled
 ahd0 at pci5 dev 0 function 0
 ahd0: Enabling 39Bit Addressing
 ahd0: interrupting at ioapic0 pin 16
 ahd0: aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66 MHz, 512 SCBs
 scsibus0 at ahd0: 16 targets, 8 luns per target
 pci_mem_find: expected type mem, found i/o
 viaide0 at pci5 dev 1 function 0
 viaide0: VIA Technologies VT6421 Serial RAID Controller (rev. 0x50)
 viaide0: bus-master DMA support present
 viaide0: using ioapic0 pin 17 for native-PCI interrupt
 viaide0: primary channel wired to native-PCI mode
 atabus2 at viaide0 channel 0
 viaide0: secondary channel wired to native-PCI mode
 atabus3 at viaide0 channel 1
 ichlpcib0 at pci0 dev 31 function 0
 ichlpcib0: vendor 0x8086 product 0x2918 (rev. 0x02)
 timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
 ichlpcib0: 24-bit timer
 ichlpcib0: TCO (watchdog) timer configured.
 piixide0 at pci0 dev 31 function 2
 piixide0: Intel 82801I Serial ATA Controller (ICH9) (rev. 0x02)
 piixide0: bus-master DMA support present
 piixide0: primary channel configured to native-PCI mode
 piixide0: using ioapic0 pin 22 for native-PCI interrupt
 atabus4 at piixide0 channel 0
 piixide0: secondary channel configured to native-PCI mode
 atabus5 at piixide0 channel 1
 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2930 (rev. 0x02)
 ichsmb0: interrupting at ioapic0 pin 18
 iic0 at ichsmb0: I2C bus
 piixide1 at pci0 dev 31 function 5
 piixide1: Intel 82801I Serial ATA Controller (ICH9) (rev. 0x02)
 piixide1: bus-master DMA support present
 piixide1: primary channel wired to native-PCI mode
 piixide1: using ioapic0 pin 22 for native-PCI interrupt
 atabus6 at piixide1 channel 0
 piixide1: secondary channel wired to native-PCI mode
 atabus7 at piixide1 channel 1
 isa0 at ichlpcib0
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 timecounter: Timecounter "TSC" frequency 2400172740 Hz quality 3000
 scsibus0: waiting 2 seconds for devices to settle...
 azalia0: codec[0]: Realtek ALC883 (rev. 0.2), HDA rev. 1.0
 audio0 at azalia0: full duplex, playback, capture, independent
 atapibus0 at atabus0: 2 targets
 uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub3: 6 ports with 6 removable, self powered
 cd0 at atapibus0 drive 0: <HL-DT-STDVD-RAM GH22NP20, , 2.00> cdrom removable
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
 uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub4: 2 ports with 2 removable, self powered
 uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub5: 2 ports with 2 removable, self powered
 uhub6 at usb6: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub6: 2 ports with 2 removable, self powered
 uhub7 at usb7: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub7: 6 ports with 6 removable, self powered
 uhidev0 at uhub2 port 2 configuration 1 interface 0
 uhidev0: Logitech USB Gaming Mouse, rev 2.00/52.00, addr 2, iclass 3/1
 ums0 at uhidev0: 16 buttons, W and Z dirs
 wsmouse0 at ums0 mux 0
 uhidev1 at uhub2 port 2 configuration 1 interface 1
 uhidev1: Logitech USB Gaming Mouse, rev 2.00/52.00, addr 2, iclass 3/0
 uhidev1: 17 report ids
 uhid0 at uhidev1 reportid 16: input=6, output=6, feature=0
 uhid1 at uhidev1 reportid 17: input=19, output=19, feature=0
 wd0 at atabus4 drive 0: <WDC WD2500JS-00MHB0>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 wd1 at atabus6 drive 0: <SAMSUNG HD502IJ>
 wd1: drive supports 16-sector PIO transfers, LBA48 addressing
 wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
 wd1: 32-bit data port
 wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
 wd1(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 wd2 at atabus7 drive 0: <WDC WD6400AAKS-22A7B0>
 wd2: drive supports 16-sector PIO transfers, LBA48 addressing
 wd2: 596 GB, 1240341 cyl, 16 head, 63 sec, 512 bytes/sect x 1250263728 sectors
 wd2: 32-bit data port
 wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd2(piixide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 Kernelized RAIDframe activated
 pad0: outputs: 44100Hz, 16-bit, stereo
 audio1 at pad0: half duplex, playback, capture
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 
 --MP_/ll6o+5KI61uWD517wNHbiMT--
 


Home | Main Index | Thread Index | Old Index