NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: kern/43569: sata cdrom drive downgraded to u-dma 1



The following reply was made to PR kern/43569; it has been noted by GNATS.

From: daniel.meynen%homily-service.net@localhost
To: gnats-bugs%netbsd.org@localhost
Cc: dholland-bugs%netbsd.org@localhost
Subject: Re: kern/43569: sata cdrom drive downgraded to u-dma 1
Date: Tue, 06 Jul 2010 15:54:59 +0200

 David, 
 
  
 
 I have just tried 5.1-RC3, but the result is the same. 
 
 I have not installed 5.1-RC3, for I have no hard drive free, but I began the 
 installation with the four diskets.  After that, I switched to /bin/sh and I 
 tried to mount a cd. 
 
 Here is the dmesg from the kernel of the four diskets of 5.1-RC3: 
 
 NetBSD 5.1_RC3 (INSTALL) #0: Sat Jun 12 20:26:05 UTC 2010
        
builds%b8.netbsd.org@localhost:/home/builds/ab/netbsd-5-1-RC3/amd64/201006130031Z-obj
 
 /home/builds/ab/netbsd-5-1-RC3/src/sys/arch/amd64/compile/INSTALL
 total memory =
  4094 MB
 avail memory = 3950 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 SMBIOS rev. 2.3 @ 0xf0000 (79 entries)
 System manufacturer System Product Name (System Version)
 mainbus0 (root)
 cpu0 at mainbus0 apid 0: AMD 686-class, 2210MHz, id 0x40fb2
 cpu0: AMD PowerNow! Technology 2200 MHz
 cpu0: available frequencies (Mhz): 1000 1800 2000 2200
 cpu1 at mainbus0 apid 1: AMD 686-class, 2210MHz, id 0x40fb2
 ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
 acpi0 at mainbus0: Intel ACPICA 20080321
 acpi0: X/RSDT: OemId <Nvidia,AWRDACPI,42302e31>, AslId <AWRD,00000000>
 acpi0: SCI interrupting at int 9
 acpi0: fixed-feature power button present
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 ACPI-Fast 24-bit timer
 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 aiboost0 at acpi0 (ASOC, ATK0110-16843024)
 aiboost0: ASUS AI Boost Hardware monitor
 attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
 midi0 at pcppi1: PC speaker (CPU-intensive output)
 sysbeep0 at pcppi1
 FDC0 (PNP0700) at acpi0 not configured
 UAR1 (PNP0501) at acpi0 not configured
 LPT1 (PNP0400) at acpi0 not configured
 pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
 FAN (PNP0C0B) at acpi0 not configured
 acpitz0 at acpi0 (THRM): active cooling level 0: 73.0C critical 75.0C 
 passive 40.0C
 attimer1: attached to pcppi1
 pckbd0 at pckbc1 (kbd slot)
 pckbc1: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 vendor 0x10de product 0x0369 (RAM memory, revision 0xa1) at pci0 dev 0 
 function 0 not configured
 pcib0 at pci0 dev 1 function 0
 pcib0: vendor 0x10de product 0x0360 (rev. 0xa2)
 nfsmbc0 at pci0 dev 1 function 1: vendor 0x10de product 0x0368 (rev. 0xa2)
 nfsmb0 at nfsmbc0 SMBus 1
 iic0 at nfsmb0: I2C bus
 nfsmb1 at nfsmbc0 SMBus 2
 iic1 at nfsmb1: I2C bus
 vendor 0x10de product 0x036a (RAM memory, revision 0xa2) at pci0 dev 1 
 function 2 not configured
 ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x036c (rev. 0xa1)
 APCF: Picked IRQ 20 with weight 0
 ohci0: interrupting at ioapic0 pin 20
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 ehci0 at pci0 dev 2 function 1: vendor 0x10de product 0x036d (rev. 0xa2)
 APCL: Picked IRQ 21 with weight 0
 ehci0: interrupting at ioapic0 pin 21
 ehci0: EHCI version 1.0
 ehci0: companion controller, 10 ports each: ohci0
 usb1 at ehci0: USB revision 2.0
 viaide0 at pci0 dev 4 function 0
 viaide0: NVIDIA MCP55 IDE Controller (rev. 0xa1)
 viaide0: bus-master DMA support present
 viaide0: primary channel configured to compatibility mode
 viaide0: primary channel interrupting at ioapic0 pin 14
 atabus0 at viaide0 channel 0
 viaide0: secondary channel configured to compatibility mode
 viaide0: secondary channel ignored (disabled)
 viaide1 at pci0 dev 5 function 0
 viaide1: NVIDIA MCP55 Serial ATA Controller (rev. 0xa2)
 viaide1: bus-master DMA support present
 viaide1: primary channel wired to native-PCI mode
 APSI: Picked IRQ 22 with weight 0
 viaide1: using ioapic0 pin 22 for native-PCI interrupt
 atabus1 at viaide1 channel 0
 viaide1: secondary channel wired to native-PCI mode
 atabus2 at viaide1 channel 1
 viaide2 at pci0 dev 5 function 1
 viaide2: NVIDIA MCP55 Serial ATA Controller (rev. 0xa2)
 viaide2: bus-master DMA support present
 viaide2: primary channel wired to native-PCI mode
 APSJ: Picked IRQ 23 with weight 0
 viaide2: using ioapic0 pin 23 for native-PCI interrupt
 atabus3 at viaide2 channel 0
 viaide2: secondary channel wired to native-PCI mode
 atabus4 at viaide2 channel 1
 viaide3 at pci0 dev 5 function 2
 viaide3: NVIDIA MCP55 Serial ATA Controller (rev. 0xa2)
 viaide3: bus-master DMA support present
 viaide3: primary channel wired to native-PCI mode
 ASA2: Picked IRQ 20 with weight 1
 viaide3: using ioapic0 pin 20 for native-PCI interrupt
 atabus5 at viaide3 channel 0
 viaide3: secondary channel wired to native-PCI mode
 atabus6 at viaide3 channel 1
 ppb0 at pci0 dev 6 function 0: vendor 0x10de product 0x0370 (rev. 0xa2)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 emuxki0 at pci1 dev 6 function 0: vendor 0x1102 product 0x0002 (audio 
 multimedia, revision 0x0a)
 APC1: Picked IRQ 16 with weight 0
 emuxki0: interrupting at ioapic0 pin 16
 emuxki0: ac97: SigmaTel STAC9708 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
 emuxki0: ac97: ext id 80<SDAC>
 audio0 at emuxki0: full duplex, playback, capture, mmap, independent
 vendor 0x1102 product 0x7002 (miscellaneous input, revision 0x0a) at pci1 
 dev 6 function 1 not configured
 nfe0 at pci0 dev 8 function 0: vendor 0x10de product 0x0373 (rev. 0xa2)
 APCH: Picked IRQ 21 with weight 1
 nfe0: interrupting at ioapic0 pin 21
 nfe0: Ethernet address 00:18:f3:8b:8a:09
 makphy0 at nfe0 phy 1: Marvell 88E1116 Gigabit PHY, rev. 1
 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
 1000baseT-FDX, auto
 nfe1 at pci0 dev 9 function 0: vendor 0x10de product 0x0373 (rev. 0xa2)
 AMC1: Picked IRQ 22 with weight 1
 nfe1: interrupting at ioapic0 pin 22
 nfe1: Ethernet address 00:18:f3:8b:96:35
 makphy1 at nfe1 phy 1: Marvell 88E1116 Gigabit PHY, rev. 1
 makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
 1000baseT-FDX, auto
 ppb1 at pci0 dev 10 function 0: vendor 0x10de product 0x0376 (rev. 0xa2)
 pci2 at ppb1 bus 2
 pci2: no spaces enabled!
 ppb2 at pci0 dev 11 function 0: vendor 0x10de product 0x0374 (rev. 0xa2)
 pci3 at ppb2 bus 3
 pci3: no spaces enabled!
 ppb3 at pci0 dev 12 function 0: vendor 0x10de product 0x0374 (rev. 0xa2)
 pci4 at ppb3 bus 4
 pci4: no spaces enabled!
 ppb4 at pci0 dev 13 function 0: vendor 0x10de product 0x0378 (rev. 0xa2)
 pci5 at ppb4 bus 5
 pci5: no spaces enabled!
 ppb5 at pci0 dev 14 function 0: vendor 0x10de product 0x0375 (rev. 0xa2)
 pci6 at ppb5 bus 6
 pci6: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb6 at pci0 dev 15 function 0: vendor 0x10de product 0x0377 (rev. 0xa2)
 pci7 at ppb6 bus 7
 pci7: i/o space, memory space enabled, rd/line, wr/inv ok
 vga0 at pci7 dev 0 function 0: vendor 0x10de product 0x01df (rev. 0xa1)
 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 drm at vga0 not configured
 pchb0 at pci0 dev 24 function 0
 pchb0: vendor 0x1022 product 0x1100 (rev. 0x00)
 pchb1 at pci0 dev 24 function 1
 pchb1: vendor 0x1022 product 0x1101 (rev. 0x00)
 pchb2 at pci0 dev 24 function 2
 pchb2: vendor 0x1022 product 0x1102 (rev. 0x00)
 amdtemp0 at pci0 dev 24 function 3
 amdtemp0: AMD CPU Temperature Sensors (K8: core rev BH-F2, socket AM2)
 isa0 at pcib0
 lpt0 at isa0 port 0x378-0x37b irq 7
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
 uhub0 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 10 ports with 10 removable, self powered
 uhub1 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub1: 10 ports with 10 removable, self powered
 viaide1 port 0: device present, speed: 1.5Gb/s
 wd0 at atabus0 drive 0viaide1 port 1: device present, speed: 1.5Gb/s
 : <Maxtor 6L080P0>
 wd0: drive supports 16-sector PIO transfers, LBA addressing
 wd0: 78167 MB, 158816 cyl, 16 head, 63 sec, 512 bytes/sect x 160086528 
 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd1 at atabus0 drive 1: <HDT722520DLAT80>
 wd1: drive supports 16-sector PIO transfers, LBA48 addressing
 wd1: 186 GB, 387621 cyl, 16 head, 63 sec, 512 bytes/sect x 390721968 sectors
 wd1: 32-bit data port
 wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 wd1(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 wd2 at atabus1 drive 0: <Kingston SSDNow V Series 64GB>
 wd2: drive supports 1-sector PIO transfers, LBA addressing
 wd2: 61057 MB, 124053 cyl, 16 head, 63 sec, 512 bytes/sect x 125045424 
 sectors
 wd2: 32-bit data port
 wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd2(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
 atapibus0 at atabus2: 2 targets
 cd0 at atapibus0 drive 0: <TSSTcorpDVD-ROM SH-D163B, , SB01> cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 cd0(viaide1:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 Kernelized RAIDframe activated
 md0: internal 5000 KB image area
 pad0: outputs: 44100Hz, 16-bit, stereo
 audio1 at pad0: half duplex, playback, capture
 boot device: fd0
 root on md0a dumps on md0b
 root file system type: ffs
 WARNING: clock gained 23 days
 WARNING: CHECK AND RESET THE DATE!
 warning: no /dev/console
 uhidev0 at uhub0 port 6 configuration 1 interface 0
 uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, iclass 3/1
 ums0 at uhidev0: 3 buttons and Z dir
 wsmouse0 at ums0 mux 0
 viaide1:1:0: lost interrupt
        type: atapi tc_bcount: 36 tc_skip: 0
 viaide1:1:0: bus-master DMA error: missing interrupt, status=0x21
 viaide1:1:0: lost interrupt
        type: atapi tc_bcount: 32 tc_skip: 0
 viaide1:1:0: bus-master DMA error: missing interrupt, status=0x21
 viaide1:1:0: lost interrupt
        type: atapi tc_bcount: 36 tc_skip: 0
 viaide1:1:0: bus-master DMA error: missing interrupt, status=0x21
 viaide1:1:0: lost interrupt
        type: atapi tc_bcount: 36 tc_skip: 0
 viaide1:1:0: bus-master DMA error: missing interrupt, status=0x21
 cd0: transfer error, downgrading to Ultra-DMA mode 1
 cd0(viaide1:1:0): using PIO mode 4, Ultra-DMA mode 1 (using DMA)
 viaide1:1:0: lost interrupt
        type: atapi tc_bcount: 4096 tc_skip: 0
 viaide1:1:0: bus-master DMA error: missing interrupt, status=0x21
 cd0: transfer
  error, downgrading to PIO mode 4
 cd0(viaide1:1:0): using PIO mode 4 
 
 
  --- 
 
 
 Do you need also the dmesg fro the kernel of 5.0.2? 
 
 Daniel 
 
  
 
  
 
 
 David Holland writes: 
 
 > The following reply was made to PR kern/43569; it has been noted by GNATS. 
 > 
 > From: David Holland <dholland-bugs%netbsd.org@localhost>
 > To: gnats-bugs%NetBSD.org@localhost
 > Cc: 
 > Subject: Re: kern/43569: sata cdrom drive downgraded to u-dma 1
 > Date: Mon, 5 Jul 2010 21:15:54 +0000 
 > 
 >  On Sun, Jul 04, 2010 at 01:30:00PM +0000, 
 > daniel.meynen%homily-service.net@localhost wrote:
 >   > The system is running on a motherboard asus m2n-sli deluxe with
 >   > chipset nvidia nforce 570 sli mcp
 >   > [...]
 >   > Jul  4 09:44:09 comete /netbsd: viaide1:1:0: lost interrupt
 >  
 >  Can you try 5.1 or -current? There were a bunch of fixes for nvidia
 >  viaide and I don't think they all made 5.0 (although I don't remember
 >  for sure...)
 >  
 >  Failing that, could you paste the dmesg bits for the viaide
 >  controller?
 >  
 >  Some of the nvidia sata controllers that attach as viaide ought to be
 >  getting handled as ahcisata instead, and I'm pretty sure we haven't
 >  found them all yet.
 >  
 >  -- 
 >  David A. Holland
 >  dholland%netbsd.org@localhost
 >  
 


Home | Main Index | Thread Index | Old Index