NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

kern/38858: interrupt problem on dell inspiron 8600



>Number:         38858
>Category:       kern
>Synopsis:       interrupt problem on dell inspiron 8600
>Confidential:   no
>Severity:       critical
>Priority:       high
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Wed Jun 04 18:50:00 +0000 2008
>Originator:     Martin Husemann
>Release:        NetBSD 4.99.64
>Organization:
The NetBSD Foundation, Inc.
>Environment:
System: NetBSD night-owl.duskware.de 4.99.64 NetBSD 4.99.64 (NIGHT-OWL) #3: Wed 
Jun 4 20:33:42 CEST 2008 
martin%night-owl.duskware.de@localhost:/usr/src/sys/arch/i386/compile/NIGHT-OWL 
i386
Architecture: i386
Machine: i386
>Description:

Interrupts for ath0 do not work on this machine with -current:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.64 (NIGHT-OWL) #3: Wed Jun  4 20:33:42 CEST 2008
        
martin%night-owl.duskware.de@localhost:/usr/src/sys/arch/i386/compile/NIGHT-OWL
total memory = 1023 MB
avail memory = 1000 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Computer Corporation Inspiron 8600                   
mainbus0 (root)
pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x40000000
pci_addr_fixup: 002:01:0 0x104c 0xac44 new address 0x40001000
cpu0 at mainbus0: Intel 686-class, 1398MHz, id 0x695
cpu0: Enhanced SpeedStep (1484 mV) 1400 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1400 1200 1000 800 600
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <DELL  , CPi R  ,27d5061e>, AslId <ASL ,00000061>
LNKA: ACPI: Found matching pin for 0.31.INTA at func 1: 0
LNKB: ACPI: Found matching pin for 0.31.INTB at func 5: 11
LNKB: BIOS IRQ 11 for 0.31.INTB is invalid
LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 11
LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 11
LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 11
LNKH: ACPI: Found matching pin for 0.29.INTD at func 7: 11
LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 11
LNKD: ACPI: Found matching pin for 2.1.INTA at func 0: 11
LNKB: ACPI: Found matching pin for 2.3.INTA at func 0: 11
LNKB: BIOS IRQ 11 for 2.3.INTA is invalid
LNKC: ACPI: Found matching pin for 2.0.INTA at func 0: 11
allocated pic pic0 type level pin 9 level 6 to cpu0 slot 9 idt entry 41
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery (Control Method)
acpibat0: battery info: Sanyo, LION, DELL 0002P6 320
acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery (Control Method)
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
pckbc0 at acpi0 (PS2M, PNP0F13): aux port
pckbc0: irq 12
pckbc1 at acpi0 (KBC, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
attimer0 at acpi0 (TMR, PNP0100): AT Timer
attimer0: io 0x40-0x43,0x50-0x53 irq 0
SPKR (PNP0800) at acpi0 not configured
npx0 at acpi0 (COPR, PNP0C04)
npx0: io 0xf0-0xff irq 13
npx0: reported by CPUID; using exception 16
com0 at acpi0 (UAR1, PNP0501)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
allocated pic pic0 type edge pin 4 level 8 to cpu0 slot 4 idt entry 36
lpt0 at acpi0 (ECP, PNP0401)
lpt0: io 0x378-0x37f,0x778-0x77b irq 7 drq 1
allocated pic pic0 type edge pin 7 level 6 to cpu0 slot 7 idt entry 39
acpitz0 at acpi0 (THM): critical 90.0C, passive cooling
pckbd0 at pckbc1 (kbd slot)
allocated pic pic0 type edge pin 1 level 6 to cpu0 slot 1 idt entry 33
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
allocated pic pic0 type edge pin 12 level 6 to cpu0 slot 12 idt entry 44
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x3340 (rev. 0x03)
agp0 at pchb0: aperture at 0xe0000000, size 0x8000000
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3341 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: vendor 0x10de product 0x0324 (rev. 0xa1)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x24c2 (rev. 0x01)
allocated pic pic0 type level pin 11 level 6 to cpu0 slot 11 idt entry 43
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x24c4 (rev. 0x01)
allocated pic pic0 type level pin 11 level 6 to cpu0 slot 11 idt entry 43
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x24c7 (rev. 0x01)
allocated pic pic0 type level pin 11 level 6 to cpu0 slot 11 idt entry 43
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x24cd (rev. 0x01)
allocated pic pic0 type level pin 11 level 6 to cpu0 slot 11 idt entry 43
ehci0: interrupting at irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb1 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x81)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
bce0 at pci2 dev 0 function 0: Broadcom BCM4401 10/100 Ethernet
allocated pic pic0 type level pin 11 level 6 to cpu0 slot 11 idt entry 43
bce0: interrupting at irq 11
bmtphy0 at bce0 phy 1: BCM4401 10/100 media interface, rev. 0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bce0: Ethernet address 00:0d:56:af:11:d2
cbb0 at pci2 dev 1 function 0: vendor 0x104c product 0xac44 (rev. 0x02)
vendor 0x104c product 0x8029 (Firewire serial bus, interface 0x10) at pci2 dev 
1 function 1 not configured
ath0 at pci2 dev 3 function 0LNKB: Picked IRQ 9 with weight 0
allocated pic pic0 type level pin 9 level 6 to cpu0 slot 9 idt entry 41

ath0: interrupting at irq 9
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 
36Mbps 48Mbps 54Mbps
ath0: mac 5.6 phy 4.1 radio 4.6
cpu0: remove slot 9 (pic pic0 pin 9 vec 41)
cbb0: cacheline 0x8 lattimer 0x20
cbb0: bhlc 0x822008
allocated pic pic0 type level pin 11 level 6 to cpu0 slot 11 idt entry 43
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x24cc (rev. 0x01)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
allocated pic pic0 type edge pin 14 level 6 to cpu0 slot 14 idt entry 46
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
allocated pic pic0 type edge pin 15 level 6 to cpu0 slot 15 idt entry 47
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
allocated pic pic0 type level pin 9 level 6 to cpu0 slot 9 idt entry 41
auich0: interrupting at irq 9
auich0: ac97: SigmaTel STAC9750/51 codec; headphone, 20 bit DAC, 20 bit ADC, 
SigmaTel 3D
auich0: ac97: ext id 605<AC97_22,AMAP,SPDIF,VRA>
isa0 at pcib0
cpu0: interrupt masks:
IPL 0 mask 1ff256d unmask fe00da92
IPL 1 mask 3ff256d unmask fc00da92
IPL 2 mask 7ff256d unmask f800da92
IPL 3 mask fff256d unmask f000da92
IPL 4 mask 1fff256d unmask e000da92
IPL 5 mask 3fff256d unmask c000da92
IPL 6 mask 3fffffef unmask c0000010
IPL 7 mask 7fffffef unmask 80000010
IPL 8 mask ffffffff unmask 0
cpu0 source 1 is pin 1 from pic pic0 maxlevel 6
        handler 0xc02bc2f4 level 6
cpu0 source 4 is pin 4 from pic pic0 maxlevel 8
        handler 0xc015ae20 level 8
cpu0 source 7 is pin 7 from pic pic0 maxlevel 6
        handler 0xc02bc2f4 level 6
cpu0 source 9 is pin 9 from pic pic0 maxlevel 6
        handler 0xc02bc2f4 level 6
        handler 0xc02bc2f4 level 6
cpu0 source 11 is pin 11 from pic pic0 maxlevel 6
        handler 0xc02bc2f4 level 6
        handler 0xc02bc2f4 level 6
        handler 0xc02bc2f4 level 6
        handler 0xc02bc2f4 level 6
        handler 0xc02bc2f4 level 6
        handler 0xc02bc2f4 level 6
cpu0 source 12 is pin 12 from pic pic0 maxlevel 6
        handler 0xc02bc2f4 level 6
cpu0 source 14 is pin 14 from pic pic0 maxlevel 6
        handler 0xc02bc2f4 level 6
cpu0 source 15 is pin 15 from pic pic0 maxlevel 6
        handler 0xc02bc2f4 level 6
cpu0 source 25 is pin 0 from pic softintr_fakepic maxlevel 1
        handler 0x0 level 1
cpu0 source 26 is pin 0 from pic softintr_fakepic maxlevel 2
        handler 0x0 level 2
cpu0 source 27 is pin 0 from pic softintr_fakepic maxlevel 3
        handler 0x0 level 3
cpu0 source 28 is pin 0 from pic softintr_fakepic maxlevel 4
        handler 0x0 level 4
cpu0 source 29 is pin 0 from pic softintr_fakepic maxlevel 5
        handler 0x0 level 5
cpu0 source 30 is pin 0 from pic lapic maxlevel 7
        handler 0x0 level 7
cpu0 source 31 is pin 0 from pic lapic maxlevel 8
        handler 0x0 level 8
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
allocated pic pic0 type level pin 0 level 7 to cpu0 slot 0 idt entry 32
acpiacad0: AC adapter online.
auich0: measured ac97 link rate at 48002 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
wd0 at atabus0 drive 0: <SAMSUNG HM120IC>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG CDRW/DVD SN-324F, , U203> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
dump_misc_init: max_paddr = 0x3ffae000
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
allocated pic pic0 type level pin 9 level 6 to cpu0 slot 9 idt entry 41
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
ath0: device timeout (txq 1, txintrperiod 5)
ath0: device timeout (txq 1, txintrperiod 4)
ath0: device timeout (txq 1, txintrperiod 3)
ath0: device timeout (txq 1, txintrperiod 2)
cpu0: remove slot 9 (pic pic0 pin 9 vec 41)
allocated pic pic0 type level pin 9 level 6 to cpu0 slot 9 idt entry 41
ath0: device timeout (txq 1, txintrperiod 1)
ath0: device timeout (txq 1, txintrperiod 1)
ath0: device timeout (txq 1, txintrperiod 1)
ath0: device timeout (txq 1, txintrperiod 1)
ath0: device timeout (txq 1, txintrperiod 1)
ath0: device timeout (txq 1, txintrperiod 1)
ath0: device timeout (txq 1, txintrperiod 1)
ath0: device timeout (txq 1, txintrperiod 1)
ath0: device timeout (txq 1, txintrperiod 1)
ath0: device timeout (txq 1, txintrperiod 1)
ath0: device timeout (txq 1, txintrperiod 1)
ath0: device timeout (txq 1, txintrperiod 1)
ath0: device timeout (txq 1, txintrperiod 1)
ath0: device timeout (txq 1, txintrperiod 1)
ath0: device timeout (txq 1, txintrperiod 1)
ath0: device timeout (txq 1, txintrperiod 1)
ath0: device timeout (txq 1, txintrperiod 1)
ath0: device timeout (txq 1, txintrperiod 1)
ath0: device timeout (txq 1, txintrperiod 1)
ath0: device timeout (txq 1, txintrperiod 1)


>How-To-Repeat:
Boot -current on a Dell Inspiron 8600

>Fix:
n/a



Home | Main Index | Thread Index | Old Index