Re: HEADS UP: graphics driver fixes

To: Taylor R Campbell <campbell+netbsd-tech-x11%mumble.net@localhost>, tech-x11%netbsd.org@localhost
Subject: Re: HEADS UP: graphics driver fixes
From: Jose Luis Rodriguez Garcia <joseyluis%gmail.com@localhost>
Date: Wed, 4 Mar 2015 19:58:14 +0100
Hi Tailor.

I wanted show two tests that I have done and two questions:

1- If I disable the LVDS monitor in xorg.conf: Ignore option,  then
xrandr shows only one display and the resolution is configured at
1920x1080 the right resolution. What can I try to see if the detected
LVDS display that doesn't exist in my PC, is a fault of NetBSD code or
the Intel driver? Do you know some linux distribution with relase that
is similar to the code used in NetBSD 7 for test it?

@@ -1,7 +1,7 @@
 Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
-       Screen      1  "Screen1" RightOf "Screen0"
+#      Screen      1  "Screen1" RightOf "Screen0"
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
 EndSection
@@ -46,7 +46,8 @@
 EndSection

 Section "Monitor"
-       Identifier   "Monitor1"
+       Identifier   "LVDS1"
+       Option       "Ignore" "True"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
 EndSection
@@ -153,7 +154,7 @@
 Section "Screen"
        Identifier "Screen1"
        Device     "Card1"
-       Monitor    "Monitor1"
+       Monitor    "LVDS1"
        SubSection "Display"
                Viewport   0 0
                Depth     1

2- If I use AccelMethoed bitl, then artifacts in fonts in gtk2
applications don't appear anymore. Only appear artifacts in graphics
(icons) and photos.

3- Does it work intel driver in NetBSD 7 for other people without
artifacts at the moment?

4- Do I send my findings with gnats?

On Sun, Mar 1, 2015 at 8:03 PM, Jose Luis Rodriguez Garcia
<joseyluis%gmail.com@localhost> wrote:
> Two improvements:
> A)
> It detects now all the modes. Before I had to use a ModeLine entry in xorg.conf
>
> Now there isn't timeout message.
>
> Not it configures to 102x768 instead of 1920x1080. I have to use
> xrandr for choose the resolution or a entry in xorg.conf.
>
> The PC has only VGA ouput. There isn't LVDS1 output. It can be the
> cause of the problem. xrandr thinks that thre is a LVDS1 display
> connected with measures of 0mm x 0mm
>
> Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
> LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y
> axis) 0mm x 0mm
>    1024x768      60.00*+
>    800x600       60.32    56.25
>    640x480       59.94
> VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis)
> 510mm x 287mm
>    1920x1080     60.00 +
>    1280x1024     75.02    60.02
>    1152x864      75.00
>    1024x768      75.08    60.00*
>    800x600       75.00    60.32
>    640x480       75.00    60.00
>    720x400       70.08
>
> # xrandr --output VGA1 --mode 1920x1080
> pc2# xrandr
> Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 4096 x 4096
> LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y
> axis) 0mm x 0mm
>    1024x768      60.00*+
>    800x600       60.32    56.25
>    640x480       59.94
> VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y
> axis) 510mm x 287mm
>    1920x1080     60.00*+
>    1280x1024     75.02    60.02
>    1152x864      75.00
>    1024x768      75.08    60.00
>    800x600       75.00    60.32
>    640x480       75.00    60.00
>    720x400       70.08
>
>
> It is using NetBSD 7 binaries from December and kernel from HEAD: 201502280630Z
>
> B)
> After of this I have update the kernel to 201502282230Z/ (later of
> your mail, but it contains several changes that you have included
> after the mail).
>
> Now the playing of movies is more stable with mplayer. Now when I
> startup the browser, appears artifacts in the broser )as before), but
> the movie continues working. It is using the overlay mode of mplayer.
> Before it was broken when It appeared the first timeout or the same:
> artifacts, usually in less of one minute.
>
> Now the playing with mplayer seems more stable (it takes 10-40 minutes
> using browser, for than mplayer stops working).
>
> It continues have the same problem with artifacts.
>
> My PC is : http://www.shuttle.eu/products/slim/xs35v2/overview/
>
> It uses a GMA3510
> It is 64 bits
>
> I copy the dmesg output. You can ignore errores about the hard'disk
> )it is broken and nead ro fail totally=.
>
>
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
>     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
>     The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
>
> NetBSD 7.99.5 (GENERIC.201502282230Z) #0: Sat Feb 28 23:24:53 UTC 2015
>         snj%b45.netbsd.org@localhost:/home/builds/ab/HEAD/amd64/201502282230Z-obj/home/source/ab/HEAD/src/sys/arch/amd64/compile/GENERIC
> total memory = 4086 MB
> avail memory = 3949 MB
> timecounter: Timecounters tick every 10.000 msec
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> Standard XS35 (To Be Filled By O.E.M.)
> mainbus0 (root)
> ACPI: RSDP 0x00000000000F9ED0 000024 (v02 ACPIAM)
> ACPI: XSDT 0x00000000BF6B0100 00005C (v01 Shuttl Shuttle  20110321
> MSFT 00000097)
> ACPI: FACP 0x00000000BF6B0290 0000F4 (v04 032111 FACP1608 20110321
> MSFT 00000097)
> ACPI: DSDT 0x00000000BF6B05C0 006645 (v02 XS35V  XS35V10  00000200
> INTL 20051117)
> ACPI: FACS 0x00000000BF6BE000 000040
> ACPI: APIC 0x00000000BF6B0390 00006C (v02 032111 APIC1608 20110321
> MSFT 00000097)
> ACPI: MCFG 0x00000000BF6B0400 00003C (v01 032111 OEMMCFG  20110321
> MSFT 00000097)
> ACPI: SLIC 0x00000000BF6B0440 000176 (v01 Shuttl Shuttle  20110321
> MSFT 00000097)
> ACPI: OEMB 0x00000000BF6BE040 000072 (v01 032111 OEMB1608 20110321
> MSFT 00000097)
> ACPI: HPET 0x00000000BF6BA5C0 000038 (v01 032111 OEMHPET  20110321
> MSFT 00000097)
> ACPI: GSCI 0x00000000BF6BE0C0 002024 (v01 032111 GMCHSCI  20110321
> MSFT 00000097)
> ACPI: All ACPI Tables successfully acquired
> cpu0 at mainbus0 apid 0
> cpu0: Intel(R) Atom(TM) CPU D525   @ 1.80GHz, id 0x106ca
> cpu1 at mainbus0 apid 2
> cpu1: Intel(R) Atom(TM) CPU D525   @ 1.80GHz, id 0x106ca
> cpu2 at mainbus0 apid 1
> cpu2: Intel(R) Atom(TM) CPU D525   @ 1.80GHz, id 0x106ca
> cpu3 at mainbus0 apid 3
> cpu3: Intel(R) Atom(TM) CPU D525   @ 1.80GHz, id 0x106ca
> ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x20, 24 pins
> acpi0 at mainbus0: Intel ACPICA 20140926
> acpi0: X/RSDT: OemId <Shuttl,Shuttle ,20110321>, AslId <MSFT,00000097>
> ACPI Error: No handler for Region [ECRM] (0xfffffe813ecf3e08)
> [EmbeddedControl] (20140926/evregion-181)
> ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140926/exfldio-322)
> ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_._REG]
> (Node 0xfffffe813eceabd0), AE_NOT_EXIST (20140926/psparse-552)
> acpi0: SCI interrupting at int 9
> timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
> hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
> timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
> acpiec0 at acpi0 (EC0, PNP0C09)
> : io 0x62,0x66
> MCH (PNP0C01) at acpi0 not configured
> attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
> pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
> pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
> pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
> midi0 at pcppi1: PC speaker
> sysbeep0 at pcppi1
> RMSC (PNP0C02) at acpi0 not configured
> FWH (INT0800) at acpi0 not configured
> FWHE (PNP0C02) at acpi0 not configured
> OMSC (PNP0C02) at acpi0 not configured
> PCIE (PNP0C02) at acpi0 not configured
> acpivga0 at acpi0 (GFX0): ACPI Display Adapter
> acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
> acpiout1 at acpivga0 (LCD, 0x0410): ACPI Display Output Device
> acpiout1: brightness levels: [0-7]
> acpivga0: connected output devices:
> acpivga0:   0x0100 (acpiout0): VGA Analog Monitor, index 0, port 0,
> head 0, bios detect
> acpivga0:   0x0410 (acpiout1): Int. Digital Flat Panel, index 0, port
> 1, head 0, bios detect
> acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
> RMEM (PNP0C01) at acpi0 not configured
> acpibut1 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
> acpiwmi0 at acpi0 (AMW0, PNP0C14-1): ACPI WMI Interface
> wmieeepc0 at acpiwmi0: Asus Eee PC WMI mappings
> acpitz0 at acpi0 (TZ00)
> acpitz0: levels: critical 104.0 C, passive cooling
> ACPI: Enabled 3 GPEs in block 00 to 1F
> ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_]
> (20140926/hwxface-646)
> ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_]
> (20140926/hwxface-646)
> pckbd0 at pckbc1 (kbd slot)
> pckbc1: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> attimer1: attached to pcppi1
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> pchb0 at pci0 dev 0 function 0: vendor 8086 product a000 (rev. 0x02)
> agp0 at pchb0: i915-family chipset
> agp0: detected 7932k stolen memory
> agp0: BAR size 100000 mismatches detected GTT size 40000; trusting BAR
> agp0: aperture at 0xd0000000, size 0x10000000
> i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product a001 (rev. 0x02)
> drm: Memory usable by graphics device = 1024M
> drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
> drm: Driver supports precise vblank timestamp query.
> i915drmkms0: interrupting at ioapic0 pin 16 (i915)
> drm: initialized overlay support
> intelfb0 at i915drmkms0
> i915drmkms0: info: registered panic notifier
> intelfb0: framebuffer at 0xffff800048e12000, size 1920x1080, depth 32,
> stride 7680
> wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation),
> using wskbd0
> wsmux1: connecting to wsdisplay0
> vendor 8086 product a002 (miscellaneous display, revision 0x02) at
> pci0 dev 2 function 1 not configured
> hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
> hdaudio0: interrupting at ioapic0 pin 16
> hdafg0 at hdaudio0: vendor 111d product 7605
> hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
> hdafg0: ADC01 2ch: Mic In [Jack]
> hdafg0: ADC02 2ch: Mic In [Built-In]
> hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
> audio0 at hdafg0: full duplex, playback, capture, mmap, independent
> ppb0 at pci0 dev 28 function 0: vendor 8086 product 27d0 (rev. 0x02)
> ppb0: PCI Express capability version 1 <Root Port of PCI-E Root
> Complex> x1 @ 2.5GT/s
> pci1 at ppb0 bus 1
> pci1: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb1 at pci0 dev 28 function 1: vendor 8086 product 27d2 (rev. 0x02)
> ppb1: PCI Express capability version 1 <Root Port of PCI-E Root
> Complex> x1 @ 2.5GT/s
> pci2 at ppb1 bus 2
> pci2: i/o space, memory space enabled, rd/line, wr/inv ok
> vendor 197b product 2382 (miscellaneous system, revision 0x80) at pci2
> dev 0 function 0 not configured
> sdhc0 at pci2 dev 0 function 2: vendor 197b product 2381 (rev. 0x80)
> sdhc0: interrupting at ioapic0 pin 18
> sdhc0: SD Host Specification 2.0, rev.176
> sdhc0: using DMA transfer
> sdmmc0 at sdhc0 slot 0
> vendor 197b product 2383 (miscellaneous system, revision 0x80) at pci2
> dev 0 function 3 not configured
> jme0 at pci2 dev 0 function 5
> jme0: JMicron JMC250 Gigabit Ethernet Controller
> jme0: PCI device revision : 0x3, Chip revision: 0x23
> jme0: Ethernet address 80:ee:73:13:66:4f
> jme0: interrupting at ioapic0 pin 17
> ukphy0 at jme0 phy 1: OUI 0x00d831, model 0x0021, rev. 1
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> ppb2 at pci0 dev 28 function 3: vendor 8086 product 27d6 (rev. 0x02)
> ppb2: PCI Express capability version 1 <Root Port of PCI-E Root
> Complex> x1 @ 2.5GT/s
> pci3 at ppb2 bus 3
> pci3: i/o space, memory space enabled, rd/line, wr/inv ok
> vendor 10ec product 8176 (miscellaneous network, revision 0x01) at
> pci3 dev 0 function 0 not configured
> uhci0 at pci0 dev 29 function 0: vendor 8086 product 27c8 (rev. 0x02)
> uhci0: interrupting at ioapic0 pin 23
> usb0 at uhci0: USB revision 1.0
> uhci1 at pci0 dev 29 function 1: vendor 8086 product 27c9 (rev. 0x02)
> uhci1: interrupting at ioapic0 pin 19
> usb1 at uhci1: USB revision 1.0
> uhci2 at pci0 dev 29 function 2: vendor 8086 product 27ca (rev. 0x02)
> uhci2: interrupting at ioapic0 pin 18
> usb2 at uhci2: USB revision 1.0
> uhci3 at pci0 dev 29 function 3: vendor 8086 product 27cb (rev. 0x02)
> uhci3: interrupting at ioapic0 pin 16
> usb3 at uhci3: USB revision 1.0
> ehci0 at pci0 dev 29 function 7: vendor 8086 product 27cc (rev. 0x02)
> ehci0: interrupting at ioapic0 pin 23
> ehci0: EHCI version 1.0
> ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
> usb4 at ehci0: USB revision 2.0
> ppb3 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0xe2)
> pci4 at ppb3 bus 4
> pci4: i/o space, memory space enabled
> ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 27bc (rev. 0x02)
> timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
> ichlpcib0: 24-bit timer
> ichlpcib0: TCO (watchdog) timer configured.
> gpio0 at ichlpcib0: 64 pins
> piixide0 at pci0 dev 31 function 2: Intel 82801GB/GR Serial ATA/Raid
> Controller (ICH7) (rev. 0x02)
> piixide0: bus-master DMA support present
> piixide0: primary channel configured to compatibility mode
> piixide0: primary channel interrupting at ioapic0 pin 14
> atabus0 at piixide0 channel 0
> piixide0: secondary channel configured to compatibility mode
> piixide0: secondary channel interrupting at ioapic0 pin 15
> atabus1 at piixide0 channel 1
> ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 27da (rev. 0x02)
> ichsmb0: interrupting at ioapic0 pin 19
> iic0 at ichsmb0: I2C bus
> isa0 at ichlpcib0
> acpicpu0 at cpu0: ACPI CPU
> acpicpu0: C1: HLT, lat   0 us, pow     0 mW
> coretemp0 at cpu0: thermal sensor, 1 C resolution
> acpicpu1 at cpu1: ACPI CPU
> coretemp1 at cpu1: thermal sensor, 1 C resolution
> acpicpu2 at cpu2: ACPI CPU
> acpicpu3 at cpu3: ACPI CPU
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> uhub0 at usb1: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhub1 at usb2: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhub2 at usb4: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub2: 8 ports with 8 removable, self powered
> uhub3 at usb0: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> uhub4 at usb3: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub4: 2 ports with 2 removable, self powered
> IPsec: Initialized Security Association Processing.
> ehci0: handing over low speed device on port 1 to uhci0
> ehci0: handing over low speed device on port 5 to uhci2
> ehci0: handing over low speed device on port 6 to uhci2
> uhidev0 at uhub3 port 1 configuration 1 interface 0
> uhidev0: Padix Co. Ltd. USB, 3-axis, 4-button joystick, rev 1.01/1.00,
> addr 2, iclass 3/0
> uhid0 at uhidev0: input=6, output=0, feature=0
> uhidev1 at uhub1 port 1 configuration 1 interface 0
> uhidev1: Semi Tech Semi Tech PS/2 Keyboard - PS/2 Mouse, rev
> 1.01/0.01, addr 2, iclass 3/1
> ukbd0 at uhidev1: 8 modifier keys, 6 key codes
> wd0 at atabus0 drive 0
> wd0: <SAMSUNG HN-M101MBB>
> wd0: drive supports 16-sector PIO transfers, LBA48 addressing
> wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev2 at uhub1 port 1 configuration 1 interface 1
> uhidev2: Semi Tech Semi Tech PS/2 Keyboard - PS/2 Mouse, rev
> 1.01/0.01, addr 2, iclass 3/1
> ums0 at uhidev2: 3 buttons and Z dir
> wsmouse0 at ums0 mux 0
> wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
> wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
> uhidev3 at uhub1 port 2 configuration 1 interface 0
> uhidev3: vendor 1bcf USB Optical Mouse, rev 2.00/0.14, addr 3, iclass 3/1
> uhidev3: 1 report ids
> ums1 at uhidev3 reportid 1: 5 buttons, W and Z dirs
> wsmouse1 at ums1 mux 0
> atapibus0 at atabus1: 2 targets
> cd0 at atapibus0 drive 0: <HL-DT-STDVDRAM GT32N, KZ7B2I13217, 1.00>
> cdrom removable
> cd0: 32-bit data port
> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
> cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
> Kernelized RAIDframe activated
> pad0: outputs: 44100Hz, 16-bit, stereo
> audio1 at pad0: half duplex, playback, capture
> boot device: wd0
> root on wd0a dumps on wd0b
> root file system type: ffs
> kern.module.path=/stand/amd64/7.99.5/modules
> tap0: Ethernet address f2:0b:a4:50:17:2b
> tap1: Ethernet address f2:0b:a4:57:ee:a5
> tap2: Ethernet address f2:0b:a4:68:07:22
> tap5: Ethernet address f2:0b:a4:d3:9c:5c
> tap6: Ethernet address f2:0b:a4:c4:57:87
> tap7: Ethernet address f2:0b:a4:94:6e:f6
> wsdisplay0: screen 1 added (default, vt100 emulation)
> wsdisplay0: screen 2 added (default, vt100 emulation)
> wsdisplay0: screen 3 added (default, vt100 emulation)
> wsdisplay0: screen 4 added (default, vt100 emulation)
> wd0a: error reading fsbn 496459904 of 496459904-496459935 (wd0 bn
> 496459967; cn 492519 tn 12 sn 59), retrying
> wd0a: error reading fsbn 496459904 of 496459904-496459935 (wd0 bn
> 496459967; cn 492519 tn 12 sn 59), retrying
> wd0a: error reading fsbn 496459904 of 496459904-496459935 (wd0 bn
> 496459967; cn 492519 tn 12 sn 59), retrying
> wd0a: error reading fsbn 496459904 of 496459904-496459935 (wd0 bn
> 496459967; cn 492519 tn 12 sn 59), retrying
> wd0a: error reading fsbn 496459929 of 496459904-496459935 (wd0 bn
> 496459992; cn 492519 tn 13 sn 21), retrying
> wd0a: error reading fsbn 496459929 of 496459904-496459935 (wd0 bn
> 496459992; cn 492519 tn 13 sn 21)
> wmieeepc0: unknown key 0x01 for event 0xD2
> wmieeepc0: unknown key 0x01 for event 0xD2
> wmieeepc0: unknown key 0x01 for event 0xD2
> wmieeepc0: unknown key 0x01 for event 0xD2
> wmieeepc0: unknown key 0x01 for event 0xD2
> wmieeepc0: unknown key 0x01 for event 0xD2
> piixide0:0:0: lost interrupt
>         type: ata tc_bcount: 16384 tc_skip: 0
> piixide0:0:0: bus-master DMA error: missing interrupt, status=0x21
> piixide0:0:0: device timeout, c_bcount=16384, c_skip0
> wd0a: device timeout reading fsbn 1803646816 of 1803646816-1803646847
> (wd0 bn 1803646879; cn 1789332 tn 3 sn 34), retrying
> wd0: soft error (corrected)
> piixide0:0:0: lost interrupt
>         type: ata tc_bcount: 16384 tc_skip: 0
> piixide0:0:0: bus-master DMA error: missing interrupt, status=0x21
> piixide0:0:0: device timeout, c_bcount=16384, c_skip0
> wd0a: device timeout reading fsbn 1814725088 of 1814725088-1814725119
> (wd0 bn 1814725151; cn 1800322 tn 9 sn 8), retrying
> wd0: soft error (corrected)
> pc2#
Follow-Ups:
- Re: HEADS UP: graphics driver fixes
  - From: Taylor R Campbell
References:
- Re: HEADS UP: graphics driver fixes
  - From: Jose Luis Rodriguez Garcia
Prev by Date: re: requirements for MesaLib update in pkgsrc?
Next by Date: Re: HEADS UP: graphics driver fixes
Previous by Thread: Re: HEADS UP: graphics driver fixes
Next by Thread: Re: HEADS UP: graphics driver fixes
Indexes:
Home | Main Index | Thread Index | Old Index