System:
Dell PowerEdge 8450
4 x 700-Mhz Xeon (2MB L2 Cache)
24 gig RAM
Perc 2/QC RAID 1 on 2 34 Gig HD

Software:
NetBSD i386-current  20040317

Note, only 4 Gig of RAM showed up. This was explained in by Havard 
Eidnes in a previous post. Could someone explain about the 4 Gig RAM limit?

---
NetBSD 1.6ZK (GENERIC.MP) #0: Thu Mar 18 03:44:55 UTC 2004
    
autobuild@tgm.netbsd.org:/autobuild/HEAD/i386/OBJ/autobuild/HEAD/src/sys/arch/i386/compile/GENERIC.MP
total memory = 3839 MB
avail memory = 3750 MB
BIOS32 rev. 0 found at 0xfd7fc
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (INTEL    OCPRF100    )
cpu0 at mainbus0: apid 7 (boot processor)
cpu0: Intel Pentium III Xeon (686-class), 700.11 MHz, id 0x6a1
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383fbff<FXSR,SSE>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 2 MB 32b/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: calibrating local timer
cpu0: apic clock running at 100 MHz
cpu0: 64 page colors
cpu1 at mainbus0: apid 4 (application processor)
cpu1: starting
cpu1: Intel Pentium III Xeon (686-class), 700.07 MHz, id 0x6a1
cpu1: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu1: features 383fbff<FXSR,SSE>
cpu1: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu1: L2 cache 2 MB 32b/line 8-way
cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu2 at mainbus0: apid 5 (application processor)
cpu2: starting
cpu2: Intel Pentium III Xeon (686-class), 700.07 MHz, id 0x6a1
cpu2: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu2: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu2: features 383fbff<FXSR,SSE>
cpu2: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu2: L2 cache 2 MB 32b/line 8-way
cpu2: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu2: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu3 at mainbus0: apid 6 (application processor)
cpu3: starting
cpu3: Intel Pentium III Xeon (686-class), 700.07 MHz, id 0x6a1
cpu3: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu3: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu3: features 383fbff<FXSR,SSE>
cpu3: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu3: L2 cache 2 MB 32b/line 8-way
cpu3: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu3: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
mpbios: bus 0 is type PCI  
mpbios: bus 1 is type PCI  
mpbios: bus 2 is type PCI  
mpbios: bus 3 is type PCI  
mpbios: bus 4 is type ISA  
ioapic0 at mainbus0 apid 0 (I/O APIC)
ioapic0: pa 0xfec00000, version 13, 64 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
Compaq product 0xa0f7 (system subclass 0x04, revision 0x11) at pci0 dev 
0 function 0 not configured
aac0 at pci0 dev 4 function 0: Dell PERC 2/QC
aac0: interrupting at ioapic0 pin 61 (irq 15)
aac0: StrongARM SA110 at 233MHz, 32MB cache, required battery present, 
kernel 2.5-0
ld0 at aac0 unit 0: RAID 1 (Mirror)
ld0: 34998 MB, 8888 cyl, 128 head, 63 sec, 512 bytes/sect x 71677440 sectors
esiop0 at pci0 dev 10 function 0: Symbios Logic 53c896 (ultra2-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at ioapic0 pin 58 (irq 11)
scsibus0 at esiop0: 16 targets, 8 luns per target
esiop1 at pci0 dev 10 function 1: Symbios Logic 53c896 (ultra2-wide scsi)
esiop1: using on-board RAM
esiop1: interrupting at ioapic0 pin 18 (irq 11)
scsibus1 at esiop1: 16 targets, 8 luns per target
vga1 at pci0 dev 12 function 0: Cirrus Logic CL-GD5446 (rev. 0x45)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 15 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
piixide0 at pci0 dev 15 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 15 function 2: Intel 82371AB USB Host Controller 
(PIIX4) (rev. 0x01)
uhci0: interrupting at ioapic0 pin 49 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, 
revision 0x02) at pci0 dev 15 function 3 not configured
Corrollary product 0x1117 (RAM memory, revision 0x05) at pci0 dev 20 
function 0 not configured
Corrollary product 0x1117 (RAM memory, revision 0x05) at pci0 dev 20 
function 1 not configured
pchb0 at pci0 dev 24 function 0
pchb0: Compaq product 0x6010 (rev. 0x01)
pchb1 at pci0 dev 25 function 0
pchb1: Compaq product 0x6010 (rev. 0x01)
pchb2 at pci0 dev 26 function 0
pchb2: Compaq product 0x6010 (rev. 0x01)
pchb3 at pci0 dev 27 function 0
pchb3: Compaq product 0x6010 (rev. 0x01)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG SC-140B, , d005> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using 
DMA data transfers)
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
cpu1: CPU 4 running
cpu2: CPU 5 running
cpu3: CPU 6 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
---