Subject: Re: dual pentium pro
To: None <tech-smp@netbsd.org>
From: Paul Kranenburg <pk@cs.few.eur.nl>
List: tech-smp
Date: 09/26/2003 16:19:28
> [...]
> > NetBSD 1.6X (GENERIC) #0: Fri Aug 29 22:08:38 CEST 2003
>               ^^^^^^^^^
> 
> hmm?

I'm sorry, I included the wrong log in the previous message.
Here's the correct one:


NetBSD 1.6ZC (GENERIC.MP) #0: Thu Sep 25 15:55:20 CEST 2003
	pk@longo:/usr/src/sys/arch/i386/compile/GENERIC.MP
total memory = 15996 KB
avail memory = 7332 KB
using 225 buffers containing 900 KB of memory
BIOS32 rev. 0 found at 0xf0000
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium Pro (686-class), 200.03 MHz, id 0x617
cpu0: features f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features f9ff<PGE,MCA,CMOV>
cpu0: I-cache 8 KB 32b/line 4-way, D-cache 8 KB 32b/line 2-way
cpu0: L2 cache 256 KB 32b/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 16 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ppb0 at pci0 dev 11 function 0: IBM 82351 PCI-PCI Bridge (rev. 0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
cac0 at pci1 dev 0 function 0: Compaq SMART-2/P
cac0: interrupting at irq 9
ld0 at cac0 unit 0: RAID5 array
ld0: 24563 MB, 6238 cyl, 128 head, 63 sec, 512 bytes/sect x 50306400 sectors
pceb0 at pci0 dev 15 function 0
pceb0: Intel 82375EB/SB PCI-EISA Bridge (PCEB) (rev. 0x15)
Intel 82451KX/GX Memory Controller (MC) (RAM memory, revision 0x04) at pci0 dev 20 function 0 not configured
pchb0 at pci0 dev 25 function 0
pchb0: Intel 82454KX/GX PCI Bridge (PB) (rev. 0x04)
pchb0: Compatibility PB (bus 0)
pchb1 at pci0 dev 26 function 0
pchb1: Intel 82454KX/GX PCI Bridge (PB) (rev. 0x04)
pchb1: Auxiliary PB (bus 2)
pci2 at pchb1 bus 2
pci2: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
siop0 at pci2 dev 10 function 0: Symbios Logic 53c825 (fast wide scsi)
siop0: interrupting at irq 10
scsibus0 at siop0: 16 targets, 8 luns per target
tl0 at pci2 dev 14 function 0
tl0: Compaq Netelligent 10/100 TX
tl0: Ethernet address 00:80:5f:be:88:ff
tl0: interrupting at irq 5
nsphy0 at tl0 phy 1: DP83840 10/100 media interface, rev. 0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy0 at tl0 phy 31: ThunderLAN 10BASE-T media interface, rev. 4
tlphy0: no media present
pceb1 at pci2 dev 15 function 0
pceb1: Intel 82375EB/SB PCI-EISA Bridge (PCEB) (rev. 0x15)
eisa0 at pceb1
eisa0: can't map I/O space for slot 6
isa0 at pceb1
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
lpt2 at isa0 port 0x3bc-0x3bf irq : polled
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
eisa at pceb0 not configured
isa at pceb0 not configured
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <COMPAQ, HC0183172A, 3208> disk fixed
sd0: 17366 MB, 6962 cyl, 24 head, 212 sec, 512 bytes/sect x 35566000 sectors
sd0: sync (100.00ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <COMPAQ, DGHS18Y, 01C0> disk fixed
sd1: 17366 MB, 8154 cyl, 20 head, 218 sec, 512 bytes/sect x 35566000 sectors
sd1: sync (100.00ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing
sd2 at scsibus0 target 2 lun 0: <COMPAQ, HC0183172A, 3208> disk fixed
sd2: 17366 MB, 6962 cyl, 24 head, 212 sec, 512 bytes/sect x 35566000 sectors
sd2: sync (100.00ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing
sd3 at scsibus0 target 3 lun 0: <COMPAQ, AB018322B6, A019> disk fixed
sd3: 17366 MB, 7001 cyl, 20 head, 254 sec, 512 bytes/sect x 35566000 sectors
sd3: sync (100.00ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing
cd0 at scsibus0 target 5 lun 0: <COMPAQ, CRD-254V, 1.06> cdrom removable
cd0: async, 8-bit transfers
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
tl0: transmit buffer underrun
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)