--Multipart_Wed_May__7_10:17:48_2003-1
Content-Type: text/plain; charset=US-ASCII


Hmm. I'm running NetBSD-current (1.6R) on the same board
with 2 PentiumIII's.  MPBIOS enabled and MPACPI disabled.
The BIOS version is 14.3.

Note with MPACPI it stalls at `cpu1: CPU 0 running'.

-- 
Minoura Makoto <minoura@netbsd.org>


--Multipart_Wed_May__7_10:17:48_2003-1
Content-Type: text/plain; charset=US-ASCII

NetBSD 1.6R (NNN) #83: Thu May  1 12:41:36 JST 2003
	minoura@nnn:/usr/obj/sys/arch/i386/compile/NNN
total memory = 2047 MB
avail memory = 1898 MB
using 6144 buffers containing 102 MB of memory
BIOS32 rev. 0 found at 0xfd7e3
PCI BIOS rev. 2.1 found at 0xfdab0
PCI IRQ Routing Table rev. 1.0 found at 0xfdf00, size 224 bytes (12 entries)
PCI Interrupt Router at 000:18:0 (Intel 82371FB PCI-to-ISA Bridge (PIIX))
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (INTEL    Lancewood   )
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: Intel Pentium III (686-class), 796.58 MHz, id 0x683
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383fbff<FXSR,SSE>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 256 KB 32b/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: calibrating local timer
cpu0: apic clock running at 99 MHz
cpu0: 8 page colors
cpu1 at mainbus0: apid 0 (application processor)
cpu1: starting
cpu1: Intel Pentium III (686-class), 796.54 MHz, id 0x683
cpu1: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu1: features 383fbff<FXSR,SSE>
cpu1: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu1: L2 cache 256 KB 32b/line 8-way
cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
mpbios: bus 0 is type PCI   
mpbios: bus 1 is type PCI   
mpbios: bus 2 is type PCI   
mpbios: bus 3 is type ISA   
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040001>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0201 [EISA DMA Controller] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
npx0 at acpi0 (PNP0C04)
npx0: io 0xf0-0xff irq 13
npx0: using exception 16
PNP0100 [AT Timer] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
pckbc0 at acpi0 (PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
pckbc1 at acpi0 (PNP0F13): aux port
pckbc1: irq 12
PNP0A05 [Generic ACPI Bus] at acpi0 not configured
fdc0 at acpi0 (PNP0700)
fdc0: io 0x3f2-0x3f5 irq 6 drq 2
fdc0: ctl io 3f7 did't probe. Forced attach
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
lpt0 at acpi0 (PNP0401)
lpt0: io 0x378-0x37f,0x778-0x77f irq 7 drq 3
com0 at acpi0 (PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
com1 at acpi0 (PNP0501-2)
com1: io 0x2f8-0x2ff irq 3
com1: ns16550a, working fifo
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443GX Host Bridge/Controller (rev. 0x00)
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443GX AGP Interface (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ppb1 at pci1 dev 15 function 0: Digital Equipment product 0x0023 (rev. 0x06)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ahc0 at pci0 dev 12 function 0
ahc0: interrupting at apic 2 int 19 (irq 10)
ahc0: aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
ahc1 at pci0 dev 12 function 1
ahc1: interrupting at apic 2 int 19 (irq 10)
ahc1: aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs
scsibus1 at ahc1: 16 targets, 8 luns per target
fxp0 at pci0 dev 14 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at apic 2 int 21 (irq 11)
fxp0: Ethernet address 00:d0:b7:a9:c4:be
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 18 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 18 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
atapibus0 at pciide0 channel 0: 2 targets
cd0 at atapibus0 drive 0: <CD-540E, , 1.0A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: primary channel interrupting at irq 14
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
uhci0 at pci0 dev 18 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at apic 2 int 21 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 18 function 3 not configured
vga0 at pci0 dev 20 function 0: Cirrus Logic CL-GD5480 (rev. 0x23)
wsdisplay0 at vga0 kbdmux 1: console (80x24, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
ioapic0: enabling
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus1 target 1 lun 0: <SEAGATE, ST173404LC, 0004> disk fixed
sd0: 70007 MB, 14100 cyl, 24 head, 423 sec, 512 bytes/sect x 143374738 sectors
sd0: sync (50.00ns offset 63), 16-bit (40.000MB/s) transfers, tagged queueing
sd1 at scsibus1 target 2 lun 0: <SEAGATE, ST173404LC, 0004> disk fixed
sd1: 70007 MB, 14100 cyl, 24 head, 423 sec, 512 bytes/sect x 143374738 sectors
sd1: sync (50.00ns offset 63), 16-bit (40.000MB/s) transfers, tagged queueing
sd2 at scsibus1 target 3 lun 0: <SEAGATE, ST173404LC, 0004> disk fixed
sd2: 70007 MB, 14100 cyl, 24 head, 423 sec, 512 bytes/sect x 143374738 sectors
sd2: sync (50.00ns offset 63), 16-bit (40.000MB/s) transfers, tagged queueing
sd3 at scsibus1 target 4 lun 0: <SEAGATE, ST173404LC, 0004> disk fixed
sd3: 70007 MB, 14100 cyl, 24 head, 423 sec, 512 bytes/sect x 143374738 sectors
sd3: sync (50.00ns offset 63), 16-bit (40.000MB/s) transfers, tagged queueing
ses0 at scsibus1 target 9 lun 0: <VA Linux, Fullon 2x2, 1.01> processor fixed
ses0: SAF-TE Compliant Device
ses0: async, 8-bit transfers
sd0: no disk label
sd3: no disk label
boot device: sd1
root on sd1a dumps on sd1b
root file system type: ffs
cpu1: CPU 0 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x50, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

--Multipart_Wed_May__7_10:17:48_2003-1--