Hello there,

	I've successflly compiled and ran the SMP kernel from -current.
But with SMP enabled, the keyboard does not work. I'm out of ideas, so I'd
like to hear from you.

	Dmesg follows. Compiled from GENERIC.MP, so keyboard should be
enabled by default :) Sorry for the big include. :)

---
NetBSD 1.6G (GENERIC.MP) #0: Fri Sep 27 14:57:07 BRT 2002
    root@unix:/usr/src/sys/arch/i386/compile/GENERIC.MP
total memory = 383 MB
avail memory = 349 MB
using 4935 buffers containing 19740 KB of memory
BIOS32 rev. 0 found at 0xfb220
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.1) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Pentium III (Coppermine) Pentium III (686-class), 1003.72 MHz
cpu0: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 387fbff<PGE,MCA,CMOV,FGPAT,PSE36,PN,MMX>
cpu0: features 387fbff<FXSR,SSE>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 256 KB 32b/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: serial number 0000-068A-0001-F67D-1888-C578
cpu0: calibrating local timer
cpu0: apic clock running at 133 MHz
cpu0: 8 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel Pentium III (Coppermine) Pentium III (686-class), 1003.65 MHz
cpu1: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 387fbff<PGE,MCA,CMOV,FGPAT,PSE36,PN,MMX>
cpu1: features 387fbff<FXSR,SSE>
cpu1: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu1: L2 cache 256 KB 32b/line 8-way
cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu1: serial number 0000-0686-0001-A4AA-7F1D-8117
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type ISA
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT82C691 (Apollo Pro) Host-PCI (rev. 0xc4)
agp0 at pchb0: aperture at 0xd8000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT82C598 (Apollo MVP3)
CPU-AGP B
ridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
Nvidia Corporation GeForce2 GTS (VGA display, revision 0xa4) at pci1 dev 0
funct
ion 0 not configured
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev.
0x40)
pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C686A (Apollo
KX133) ATA1
00 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <ST33210A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 3098 MB, 6296 cyl, 16 head, 63 sec, 512 bytes/sect x 6346368 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA
data
transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 1: <Hewlett-Packard CD-Writer Plus 9300,
YMVAW3SSAP, 1.0b
> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA
data
transfers)
VIA Technologies VT82C686A SMBus Controller (miscellaneous bridge,
revision 0x40
) at pci0 dev 7 function 4 not configured
auvia0 at pci0 dev 7 function 5: VIA VT82C686A AC'97 Audio (rev 0x50)
auvia0: interrupting at irq 10
auvia0: ALC38 codec; Realtek 3D
auvia0: warning: codec doesn't support hardware AC'97 2.0 Variable Rate
Audio
audio0 at auvia0: full duplex, mmap, independent
vga1 at pci0 dev 12 function 0: Cirrus Logic product 0x00d4 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ex0 at pci0 dev 13 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt
(rev. 0
x74)
ex0: interrupting at irq 11
ex0: MAC address 00:01:02:6d:bc:6e
bmtphy0 at ex0 phy 24: Broadcom 3c905C internal PHY, rev. 6
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask 0 netmask 0 ttymask 0
ioapic0: enabling
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: CPU 1 running
IP Filter: v3.4.27 initialized.  Default = pass all, Logging = enabled
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
---