Subject: Another success
To: None <tech-smp@netbsd.org>
From: John Klos <john@sixgirls.org>
List: tech-smp
Date: 06/08/2002 19:40:56
Hi,

I'm successfully running my first SMP NetBSD i386 machine. It's an old
(for i386, at least) SuperMicro P6DLS motherboard I got cheaply years ago
because it only takes Nintendo cartridge style CPUs with a bus speed of up
to 75 MHz. But it came with wide ultra SCSI built on the motherboard.

It's running one Pentium II at 412.5 MHz (366 MHz PII with a 75 MHz bus)
and a Celeron also at 412.5 MHz.

It's running a GENERIC.MP file for now. Great!

Next will come an Abit BP6 followed by some other SMP i386 board.

Does anyone have a dual or quad processor 604e card for an older PowerMac?

John Klos
Sixgirls Computing Labs


NetBSD 1.6_BETA1 (GENERIC.MP) #0: Sat Jun  8 20:07:10 UTC 2002
    jean@persephone.sixgirls.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
total memory = 127 MB
avail memory = 112 MB
using 1659 buffers containing 6636 KB of memory
BIOS32 rev. 0 found at 0xfdb70
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (INTEL    440LX       )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Celeron (Mendocino) (686-class), 412.53 MHz
cpu0: features 183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 183fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 183fbff<FXSR>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 128 KB 32b/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: calibrating local timer
cpu0: apic clock running at 74 MHz
cpu0: 8 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel Pentium II (Klamath) (686-class), 412.50 MHz
cpu1: features 80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 80fbff<PGE,MCA,CMOV,MMX>
cpu1: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type ISA
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443LX PCI AGP Controller (PAC) (rev. 0x03)
agp0 at pchb0: aperture at 0xe0000000, size 0x8000000
ppb0 at pci0 dev 1 function 0: Intel 82443LX AGP Interface (PAC) (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies 3D Rage IIC (AGP) (rev. 0x7a)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x01)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
pciide0: disabling primary channel (no drives)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: can't map i/o space
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x01) at pci0 dev 7 function 3 not configured
ahc1 at pci0 dev 14 function 0
pci_intr_map: bus 0 dev 14 func 0 pin 1; line 9
pci_intr_map: no MP mapping found
ahc1: interrupting at irq 9
ahc1: aic7880 Wide Channel A, SCSI Id=15, 16/255 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
ne2 at pci0 dev 15 function 0: RealTek 8029 Ethernet
ne2: Ethernet address 00:00:b4:b7:94:74
ne2: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto
pci_intr_map: bus 0 dev 15 func 0 pin 1; line 11
pci_intr_map: no MP mapping found
ne2: interrupting at irq 11
rtk0 at pci0 dev 18 function 0: RealTek 8139 10/100BaseTX
pci_intr_map: bus 0 dev 18 func 0 pin 1; line 5
pci_intr_map: no MP mapping found
rtk0: interrupting at irq 5
rtk0: Ethernet address 00:48:54:1f:4b:ca
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0 at pci0 dev 20 function 0: Intel i82557 Ethernet, rev 2
pci_intr_map: bus 0 dev 20 func 0 pin 1; line 9
pci_intr_map: no MP mapping found
fxp0: interrupting at irq 9
fxp0: Ethernet address 00:60:94:a5:9c:e5
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
ne1 at isa0 port 0x300-0x31f irq 10
ne1: NE2000 (RTL8019) Ethernet
ne1: Ethernet address 00:00:21:ea:06:20
ne1: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0xb0] auto
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: read port 0x203
ne3 at isapnp0 port 0x200/32 irq 3
ne3: NE2000 (RTL8019) Ethernet
ne3: Ethernet address 00:00:21:ea:06:20
ne3: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0xb0] auto
apm0 at mainbus0: Power Management spec V1.2
biomask 0 netmask 0 ttymask 0
ioapic0: enabling
ioapic0: WARNING: sharing interrupt between different IPLs (currently broken)
ioapic0: pin 3, ipls 80..e0
ioapic0: WARNING: sharing interrupt between different IPLs (currently broken)
ioapic0: pin 19, ipls 70..80
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <SEAGATE, SX423451W, 9E13> SCSI2 0/direct fixed
sd0: 22130 MB, 6876 cyl, 28 head, 235 sec, 512 bytes/sect x 45322644 sectors
sd0: sync (100.0ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
cpu1: CPU 1 running