Subject: GENERIC.MPDEBUG on Intel PR440FX (dual PPro 200)
To: None <tech-smp@netbsd.org>
From: Erik E. Fair <fair@slow.clock.org>
List: tech-smp
Date: 05/07/2002 15:01:17
NetBSD 1.5ZC (GENERIC.MPDEBUG) #0: Mon May  6 19:18:51 PDT 2002
    root@slow.clock.org:/usr/obj/sys/arch/i386/compile/GENERIC.MPDEBUG
total memory = 127 MB
avail memory = 110 MB
using 1659 buffers containing 6636 KB of memory
BIOS32 rev. 0 found at 0xfd9f0
mainbus0 (root)
mainbus0: scanning 0x9fc00 to 0x9fff0 for MP signature
mainbus0: scanning 0x9f800 to 0x9fbf0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xf7ef0
mainbus0: MP config table at 0xf7f00, 244 bytes long
mainbus0: Intel MP Specification (Version 1.4) (INTEL    PR440FX     )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Pentium Pro (686-class), 198.69 MHz
cpu0: features fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features fbff<PGE,MCA,CMOV>
cpu0: I-cache 8 KB 32b/line 4-way, D-cache 8 KB 32b/line 2-way
cpu0: L2 cache 256 KB 32b/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: calibrating local timer
cpu0: apic clock running at 66 MHz
cpu0: 16 page colors
cpu0: kstack at 0xcab87000 for 8192 bytes
cpu0: idle pcb at 0xcab87000, idle sp at 0xcab88f98
cpu1 at mainbus0: apid 12 (application processor)
cpu1: starting
cpu1: Intel Pentium Pro (686-class), 198.67 MHz
cpu1: features fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features fbff<PGE,MCA,CMOV>
cpu1: I-cache 8 KB 32b/line 4-way, D-cache 8 KB 32b/line 2-way
cpu1: L2 cache 256 KB 32b/line 4-way
cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu1: kstack at 0xcab99000 for 8192 bytes
cpu1: idle pcb at 0xcab99000, idle sp at 0xcab9af98
mpbios: bus 0 is type PCI   
mpbios: bus 18 is type ISA   
ioapic0 at mainbus0 apid 13 (I/O APIC)
ioapic0: pa 0xfec00000, virtual wire mode, version 11, 24 pins
ioapic0: int0 attached to ExtINT (type 3<type=3=ExtINT> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int1 attached to isa0 irq 1 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int3 attached to isa0 irq 3 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int4 attached to isa0 irq 4 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int5 attached to isa0 irq 5 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int6 attached to isa0 irq 6 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int7 attached to isa0 irq 7 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int8 attached to isa0 irq 8 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int9 attached to isa0 irq 9 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int12 attached to isa0 irq 12 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int14 attached to isa0 irq 14 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int15 attached to isa0 irq 15 (type 0<type=0> flags 5<pol=1=Act Hi,trig=1=Edge>)
ioapic0: int19 attached to pci0 device 19 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int18 attached to pci0 device 17 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int16 attached to pci0 device 11 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int17 attached to pci0 device 9 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: int18 attached to pci0 device 6 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
mainbus0: MP WARNING: 120 bytes of extended entries not examined
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82441FX PCI and Memory Controller (PMC) (rev. 0x02)
fxp0 at pci0 dev 6 function 0: Intel i82557 Ethernet, rev 1
fxp0: interrupting at apic 13 int 18 (irq 10)
fxp0: detected 64 word EEPROM
fxp0: Ethernet address 00:a0:c9:06:ba:7c
nsphy0 at fxp0 phy 1: DP83840 10/100 media interface, rev. 0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371SB PCI-to-ISA Bridge (PIIX3) (rev. 0x01)
pciide0 at pci0 dev 7 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
pciide0: disabling primary channel (no drives)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 1: <CD-516E, , 1.0C> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: Intel 82371SB USB Host Controller (PIIX3) (rev. 0x01)
pci_intr_map: bus 0 dev 7 func 2 pin 4; line 11
pci_intr_map: no MP mapping found
isa_intr_establish: no MP mapping found
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ahc1 at pci0 dev 9 function 0
ahc1: interrupting at apic 13 int 17 (irq 10)
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
Texas Instruments TSB12LV26 OHCI IEEE 1394 Host Controller (Firewire serial bus, interface 0x10) at pci0 dev 11 function 0 not configured
ahc2 at pci0 dev 17 function 0
ahc2: interrupting at apic 13 int 18 (irq 10)
ahc2: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus1 at ahc2: 16 targets, 8 luns per target
vga1 at pci0 dev 19 function 0: Matrox MGA Millennium 2064W ("Storm") (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
lptprobe: mask ff data 55 failed
lptprobe: mask ff data 55 failed
seaprobe: board type unknown at address 0xc0758000
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: read port 0x203
wss1 at isapnp0 port 0x534/4,0x388/4,0x220/16 irq 5 drq 1,0
wss1: CS4236  Audio WSS/SB: CS4236
audio0 at wss1: full duplex, mmap
opl0 at wss1: model OPL3
midi1 at opl0: WSS Yamaha OPL3
joy0 at isapnp0 port 0x200/8
joy0: CS4236  Audio GAME
joy0: joystick not connected
isapnp0: <CS4236  Audio, CSC0010, , CTRL> port 0x120/8 not configured
isapnp0: <CS4236  Audio, CSC0003, , MPU> port 0x330/2 irq 9 not configured
biomask ffff netmask ffff ttymask ffff
cpu0: prelint0 700<vector=0,delmode=7,dest=0> 0<target=0>
cpu0: prelint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: timer0 300d0<vector=d0,delmode=0,masked,dest=0> 0<target=0>
cpu0: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu0: lint0 700<vector=0,delmode=7,dest=0> 0<target=0>
cpu0: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: enabling
ioapic0: int0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
ioapic0: int1 1a0<vector=a0,delmode=1,dest=0> 0<target=0>
ioapic0: int2 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int3 1e1<vector=e1,delmode=1,dest=0> 0<target=0>
ioapic0: int4 1e2<vector=e2,delmode=1,dest=0> 0<target=0>
ioapic0: int5 1c0<vector=c0,delmode=1,dest=0> 0<target=0>
ioapic0: int6 170<vector=70,delmode=1,dest=0> 0<target=0>
ioapic0: int7 1a1<vector=a1,delmode=1,dest=0> 0<target=0>
ioapic0: int8 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int9 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int10 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int11 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int12 1a2<vector=a2,delmode=1,dest=0> 0<target=0>
ioapic0: int13 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int14 10100<vector=0,delmode=1,masked,dest=0> 0<target=0>
ioapic0: int15 171<vector=71,delmode=1,dest=0> 0<target=0>
ioapic0: int16 1a100<vector=0,delmode=1,actlo,level,masked,dest=0> 0<target=0>
ioapic0: int17 a172<vector=72,delmode=1,actlo,level,dest=0> 0<target=0>
ioapic0: WARNING: sharing interrupt between different IPLs (currently broken)
ioapic0: pin 18, ipls 70..80
ioapic0: int18 a173<vector=73,delmode=1,actlo,level,dest=0> 0<target=0>
ioapic0: int19 1a100<vector=0,delmode=1,actlo,level,masked,dest=0> 0<target=0>
ioapic0: int20 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int21 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int22 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: int23 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <COMPAQ, 4345SS, C424> SCSI2 0/direct fixed
sd0: 4094 MB, 4811 cyl, 11 head, 158 sec, 512 bytes/sect x 8386000 sectors
sd0: sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
scsibus1: waiting 2 seconds for devices to settle...
udsbr0 at uhub0 port 2
udsbr0: GemTek Corp USB FM Radio, rev 1.00/4.10, addr 2
radio0 at udsbr0
boot device: sd0
root on sd0a dumps on sd0b
mountroot: trying coda...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying ntfs...
mountroot: trying nfs...
mountroot: trying lfs...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
cpu1: prelint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: prelint1 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: timer0 200d0<vector=d0,delmode=0,dest=0> 0<target=0>
cpu1: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: lint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: lint1 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: CPU 12 running
init: copying out flags `-s' 3
init: copying out path `/sbin/init' 11