Subject: crashed
To: None <tech-smp@netbsd.org>
From: DJ <slaktaren@chq.com>
List: tech-smp
Date: 11/19/2001 05:45:32
i just kernel paniced i think

i wasnt sitting at the box and i dont have a monitor hooked up to it, it just rebooted by itself... when it came back up i looked at /var/log/messages

Nov 19 05:36:05 inexistent /netbsd: fatal page fault in supervisor mode

not sure what this means... can anyone explain?


thanks,
dj


here is my dmesg output too...

NetBSD 1.5Y (INEXISTENT.MP) #11: Thu Nov  1 14:52:46 PST 2001
    slaktaren@inexistent.dnsalias.net:/usr/src/sys/arch/i386/compile/INEXISTENT.MP
total memory = 255 MB
avail memory = 235 MB
using 3297 buffers containing 13188 KB of memory
BIOS32 rev. 0 found at 0xfb590
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Celeron (Mendocino) (686-class), 551.28 MHz
cpu0: features 183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 183fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX,FXSR>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 128 KB 32b/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: calibrating local timer
cpu0: apic clock running at 100 MHz
cpu0: 8 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel Celeron (Mendocino) (686-class), 551.25 MHz
cpu1: features 183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 183fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX,FXSR>
cpu1: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu1: L2 cache 128 KB 32b/line 4-way
cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
mpbios: bus 0 is type PCI   
mpbios: bus 1 is type PCI   
mpbios: bus 2 is type ISA   
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: ATI Technologies Rage 128 4x AGP 4x (rev. 0x00)
wsdisplay0 at vga0 kbdmux -1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <Maxtor 91536U6>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 14648 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 30000096 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 1: <CD-ROM 24X/AKOx, , 16B1> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
Intel 82371AB USB Host Controller (PIIX4) (USB serial bus, revision 0x01) at pci0 dev 7 function 2 not configured
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
rtk0 at pci0 dev 11 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at apic 2 int 18 (irq 11)
rtk0: Ethernet address 00:50:ba:d3:d6:cb
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pciide1 at pci0 dev 19 function 0: Triones/Highpoint HPT366 IDE Controller
pciide1: bus-master DMA support present
pciide1: primary channel wired to native-PCI mode
pciide1: using apic 2 int 18 (irq 11) for native-PCI interrupt
pciide2 at pci0 dev 19 function 1: Triones/Highpoint HPT366 IDE Controller
pciide2: bus-master DMA support present
pciide2: primary channel wired to native-PCI mode
pciide2: using apic 2 int 18 (irq 11) for native-PCI interrupt
isa0 at pcib0
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: read port 0x203
isapnp0: No current device for tag, card 1
isapnp0: <Creative SB AWE64  PnP, CTL0045, , Audio> port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,5 not configured
isapnp0: <Creative SB AWE64  PnP, CTL7002, PNPB02F, Game> port 0x200/8 not configured
isapnp0: <Creative SB AWE64  PnP, CTL0022, , WaveTable> port 0x620/4 not configured
biomask 0 netmask 0 ttymask 0
ioapic0: enabling
ioapic0: WARNING: sharing interrupt between different IPLs (currently broken)
ioapic0: pin 18, ipls 70..80
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: CPU 1 running
IP Filter: v3.4.16 initialized.  Default = pass all, Logging = enabled
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0