Subject: SMP on alpha, is it planned ?
To: None <tech-smp@netbsd.org>
From: None <pete.vickers@uk.adtranz.com>
List: tech-smp
Date: 10/05/2000 08:39:03
Hi Guys,

Got NetBSD 1.4.2 running on a "DIGITAL Server 5000 Model 5305 6533A 5/533 4MB,
531MHz" [with 2 CPUs @ 533MHz and 1GB RAM], although I guess only one CPU is
earning it's keep at present. I see there's is interst in SMP on sparc as well
as x86, what about alpha ?

anyway thanks for all the good work :-)


Pete

pete.vickers@uk.adtranz.com | DaimlerChrysler Rail Systems | +44 7710 010257



attached is the dmesg O/P FYI..
-----------------------------------------------------------------------------------------

sd1(ncr1:1:0): WIDE SCSI (16 bit) enabled
sd1(ncr1:1:0): 20.0 MB/s (100 ns, offset 16)
sd1: 8678MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
sd2 at scsibus1 targ 2 lun 0: <DEC, RZ2DC-PA (C) DEC, 5520> SCSI2 0/direct fixed
sd2(ncr1:2:0): WIDE SCSI (16 bit) enabled
sd2(ncr1:2:0): 20.0 MB/s (100 ns, offset 16)
sd2: 8678MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
ncr2 at pci1 dev 1 function 0: ncr 53c875 fast20 wide scsi
ncr2: interrupting at kn300 irq 41
ncr2: minsync=25, maxsync=254, maxoffs=16, 128 dwords burst, large dma fifo
ncr2: single-ended, open drain IRQ driver, using on-chip SRAM
ncr2: restart (scsi reset).
scsibus2 at ncr2: 16 targets, 8 luns per target
sd3 at scsibus2 targ 0 lun 0: <DEC, RZ2DC-PA (C) DEC, 5520> SCSI2 0/direct fixed
sd3(ncr2:0:0): WIDE SCSI (16 bit) enabled
sd3(ncr2:0:0): 20.0 MB/s (100 ns, offset 16)
sd3: 8678MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
sd4 at scsibus2 targ 1 lun 0: <DEC, RZ2DC-PA (C) DEC, 5520> SCSI2 0/direct fixed
sd4(ncr2:1:0): WIDE SCSI (16 bit) enabled
sd4(ncr2:1:0): 20.0 MB/s (100 ns, offset 16)
sd4: 8678MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
sd5 at scsibus2 targ 2 lun 0: <DEC, RZ2DC-PA (C) DEC, 5520> SCSI2 0/direct fixed
sd5(ncr2:2:0): WIDE SCSI (16 bit) enabled
sd5(ncr2:2:0): 20.0 MB/s (100 ns, offset 16)
sd5: 8678MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
de0 at pci1 dev 2 function 0
de0: interrupting at kn300 irq 42
de0: 21140A [10-100Mb/s] pass 2.2
de0: address 00:06:2b:00:07:63
de0: enabling 10baseT port
mcpcia1 at mcbus0 mid 4: PCI Bridge
mcpcia1: Horse Revision 3, Left Handed Saddle Revision 4, CAP Revision 2
pci2 at mcpcia1 bus 0
pci2: i/o enabled, memory enabled
pceb0 at pci2 dev 1 function 0: Intel 82375EB/SB PCI-EISA Bridge (PCEB) (rev. 0x
15)
vga0 at pci2 dev 2 function 0: S3 Trio32/64 (rev. 0x54)
wsdisplay0 at vga0: console (80x25, vt100 emulation)
ex0 at pci2 dev 3 function 0: 3Com 3c905B-TX 10/100 Ethernet
ex0: interrupting at kn300 irq 12
ex0: MAC address 00:50:04:4d:a1:6e
OUI 0x001018 model 0x0012 rev 0 at ex0 phy 24 not configured
eisa0 at pceb0
isa0 at pceb0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x3bc-0x3bf irq 7
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
mcbus0 mid 2: CPU 4MB BCache
stray kn300 irq 16
root on sd0a dumps on sd0b
wscons: wskbd0 glued to wsdisplay0 (console)
root file system type: ffs
stray kn300 irq 4
stray kn300 irq 4
syncing disks... 3 3 done

halted.

Unrecognized boot flag '0'.
[ preserving 323456 bytes of netbsd ELF symbol table ]
consinit: not using prom console
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4.2 (GENERIC) #1: Sat Mar  4 03:08:26 PST 2000
    toddpw@chewie.toddpw.net:/usr/src/sys/arch/alpha/compile/GENERIC
DIGITAL Server 5000 Model 5305 6533A 5/533 4MB, 531MHz
8192 byte page size, 2 processors.
real mem = 1073741824 (2121728 reserved for PROM, 1071620096 used by NetBSD)
avail mem = 936706048
using 13081 buffers containing 107159552 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164A-2 (pass 2)
cpu1 at mainbus0: ID 1, 21164A-2 (pass 2)
mcbus0 at mainbus0
mcmem0 at mcbus0 mid 1: Memory
mcpcia0 at mcbus0 mid 5: PCI Bridge
mcpcia0: Horse Revision 3, Left Handed Saddle Revision 4, CAP Revision 2
pci0 at mcpcia0 bus 0
pci0: i/o enabled, memory enabled
ncr0 at pci0 dev 1 function 0: ncr 53c810 fast10 scsi
ncr0: interrupting at kn300 irq 36
ncr0: minsync=25, maxsync=206, maxoffs=8, 16 dwords burst, normal dma fifo
ncr0: single-ended, open drain IRQ driver
ncr0: restart (scsi reset).
scsibus0 at ncr0: 8 targets, 8 luns per target
cd0 at scsibus0 targ 5 lun 0: <DEC, RRD46   (C) DEC, 1337> SCSI2 5/cdrom removab
le
probe(ncr0:5:1): 10.0 MB/s (100 ns, offset 8)
ppb0 at pci0 dev 2 function 0: Digital Equipment DECchip 21152 PCI-PCI Bridge (r
ev. 0x02)
pci1 at ppb0 bus 2
pci1: i/o enabled, memory enabled
ncr1 at pci1 dev 0 function 0: ncr 53c875 fast20 wide scsi
ncr1: interrupting at kn300 irq 40
ncr1: minsync=25, maxsync=254, maxoffs=16, 128 dwords burst, large dma fifo
ncr1: single-ended, open drain IRQ driver, using on-chip SRAM
ncr1: restart (scsi reset).
scsibus1 at ncr1: 16 targets, 8 luns per target
sd0 at scsibus1 targ 0 lun 0: <DEC, RZ2DC-PA (C) DEC, 5520> SCSI2 0/direct fixed
sd0(ncr1:0:0): WIDE SCSI (16 bit) enabled
sd0(ncr1:0:0): 20.0 MB/s (100 ns, offset 16)
sd0: 8678MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
sd1 at scsibus1 targ 1 lun 0: <DEC, RZ2DC-PA (C) DEC, 5520> SCSI2 0/direct fixed
sd1(ncr1:1:0): WIDE SCSI (16 bit) enabled
sd1(ncr1:1:0): 20.0 MB/s (100 ns, offset 16)
sd1: 8678MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
sd2 at scsibus1 targ 2 lun 0: <DEC, RZ2DC-PA (C) DEC, 5520> SCSI2 0/direct fixed
sd2(ncr1:2:0): WIDE SCSI (16 bit) enabled
sd2(ncr1:2:0): 20.0 MB/s (100 ns, offset 16)
sd2: 8678MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
ncr2 at pci1 dev 1 function 0: ncr 53c875 fast20 wide scsi
ncr2: interrupting at kn300 irq 41
ncr2: minsync=25, maxsync=254, maxoffs=16, 128 dwords burst, large dma fifo
ncr2: single-ended, open drain IRQ driver, using on-chip SRAM
ncr2: restart (scsi reset).
scsibus2 at ncr2: 16 targets, 8 luns per target
sd3 at scsibus2 targ 0 lun 0: <DEC, RZ2DC-PA (C) DEC, 5520> SCSI2 0/direct fixed
sd3(ncr2:0:0): WIDE SCSI (16 bit) enabled
sd3(ncr2:0:0): 20.0 MB/s (100 ns, offset 16)
sd3: 8678MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
sd4 at scsibus2 targ 1 lun 0: <DEC, RZ2DC-PA (C) DEC, 5520> SCSI2 0/direct fixed
sd4(ncr2:1:0): WIDE SCSI (16 bit) enabled
sd4(ncr2:1:0): 20.0 MB/s (100 ns, offset 16)
sd4: 8678MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
sd5 at scsibus2 targ 2 lun 0: <DEC, RZ2DC-PA (C) DEC, 5520> SCSI2 0/direct fixed
sd5(ncr2:2:0): WIDE SCSI (16 bit) enabled
sd5(ncr2:2:0): 20.0 MB/s (100 ns, offset 16)
sd5: 8678MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
de0 at pci1 dev 2 function 0
de0: interrupting at kn300 irq 42
de0: 21140A [10-100Mb/s] pass 2.2
de0: address 00:06:2b:00:07:63
de0: enabling 10baseT port
mcpcia1 at mcbus0 mid 4: PCI Bridge
mcpcia1: Horse Revision 3, Left Handed Saddle Revision 4, CAP Revision 2
pci2 at mcpcia1 bus 0
pci2: i/o enabled, memory enabled
pceb0 at pci2 dev 1 function 0: Intel 82375EB/SB PCI-EISA Bridge (PCEB) (rev. 0x
15)
vga0 at pci2 dev 2 function 0: S3 Trio32/64 (rev. 0x54)
wsdisplay0 at vga0: console (80x25, vt100 emulation)
ex0 at pci2 dev 3 function 0: 3Com 3c905B-TX 10/100 Ethernet
ex0: interrupting at kn300 irq 12
ex0: MAC address 00:50:04:4d:a1:6e
OUI 0x001018 model 0x0012 rev 0 at ex0 phy 24 not configured
eisa0 at pceb0
isa0 at pceb0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x3bc-0x3bf irq 7
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
mcbus0 mid 2: CPU 4MB BCache
stray kn300 irq 16
wscons: wskbd0 glued to wsdisplay0 (console)
root on sd0a dumps on sd0b
root file system type: ffs
lpt0 at isa0 port 0x3bc-0x3bf irq 7
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
mcbus0 mid 2: CPU 4MB BCache
stray kn300 irq 16
wscons: wskbd0 glued to wsdisplay0 (console)
root on sd0a dumps on sd0b
root file system type: ffs
stray kn300 irq 4
stray kn300 irq 4
stray kn300 irq 0
stray kn300 irq 4

-----------------------------------------------------------------------------------------



_____________________________________________________________________
This message has been checked for known viruses.