FWIW, I've never had good luck getting cdrecord to map things=20
directly. I've always had to specify the device on the command=20
line. (or add CDR_DEVICE=3D/dev/cd0d to /etc/default/cdrecord)

# cdrecord -D /dev/cd0d -prcap

On Tue, 25 Apr 2000 16:43:24 -0700 Emre <emre@titanium.2y.net>=20
wrote:

> Hi,
>=20
> I have a "Acer CRW6206A" cd burner, and I wanted to use cdrecord to burn =
some files onto
> a CD.  Somehow when I run "cdrecord -scanbus" I get:
>=20
> bash-2.04# cdrecord -scanbus
> Cdrecord 1.8.1a01 (i386-unknown-netbsd1.4X) Copyright (C) 1995-2000 J=F6r=
g Schilling
> cdrecord: No such file or directory. Cannot open SCSI driver.
> cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are=
 root.
>=20
> Is this device supported?  I pasted my dmesg output below.  Has anyone go=
tten this to
> work with this particular CD burner (or similar).  If so, I'd be more tha=
n thankful if
> anyone could point me in the right direction.
>=20
> Thanks,
>=20
>=20
> Here's my dmesg (I'm running NetBSD-current, with the latest ports...I us=
ed
> cdrecord-current...should I try the old cdrecord first? *wonders*):
>=20
> NetBSD 1.4X (PLASMA) #0: Sat Apr 22 17:44:42 PDT 2000
> root@titanium:/usr/src/src/sys/arch/i386/compile/PLASMA
> cpu0: family 5 model 6 step 2
> cpu0: AMD K6 (586-class)
> total memory =3D 65152 KB
> avail memory =3D 55804 KB
> using 840 buffers containing 3360 KB of memory
> BIOS32 rev. 0 found at 0xfb260
> mainbus0 (root)
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled
> pchb0 at pci0 dev 0 function 0
> pchb0: VIA Technologies VT82C597 (Apollo VP3) Host-PCI Bridge (rev. 0x04)
> ppb0 at pci0 dev 1 function 0: VIA Technologies VT82C598 (Apollo MVP3) PC=
I-AGP (rev.
> 0x00)
> pci1 at ppb0 bus 1
> pci1: i/o space, memory space enabled
> vga1 at pci1 dev 0 function 0: Nvidia Corporation & SGS Thomson Microelec=
tric Riva 12
> 8 (rev. 0x22)
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> pcib0 at pci0 dev 7 function 0
> pcib0: VIA Technologies VT82C586 (Apollo VP) PCI-ISA Bridge (rev. 0x47)
> pciide0 at pci0 dev 7 function 1: VIA Technologies VT82C586A IDE Controll=
er
> pciide0: bus-master DMA support present
> pciide0: primary channel configured to compatibility mode
> wd0 at pciide0 channel 0 drive 0: <Maxtor 90845D4>
> wd0: drive supports 16-sector pio transfers, lba addressing
> wd0: 8063 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 16514064 secto=
rs
> wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> pciide0: primary channel interrupting at irq 14
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data tran=
sfers)
> pciide0: secondary channel configured to compatibility mode
> atapibus0 at pciide0 channel 1
> cd0 at atapibus0 drive 0: <CRW6206A, , 1.2A> type 5 cdrom removable
> cd0: 32-bit data port
> cd0: drive supports PIO mode 4, DMA mode 2
> pciide0: secondary channel interrupting at irq 15
> cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
> uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller =
(rev. 0x02)
> uhci0: interrupting at irq 11
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> VIA Technologies VT82C586 (Apollo VP) Power Management Controller (miscel=
laneous brid
> ge, revision 0x10) at pci0 dev 7 function 3 not configured
> pcscp0 at pci0 dev 10 function 0
> pcscp0: interrupting at irq 10
> pcscp0: AM53C974, 40MHz, SCSI ID 7
> scsibus0 at pcscp0: 8 targets, 8 luns per target
> tlp0 at pci0 dev 11 function 0: Lite-On 82C169 Ethernet, pass 2.0
> tlp0: interrupting at irq 12
> tlp0: Ethernet address 00:a0:cc:53:8b:59
> ukphy0 at tlp0 phy 1: Generic IEEE 802.3u media interface
> ukphy0: OUI 0x001018, model 0x0021, rev. 2
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> bktr0 at pci0 dev 12 function 0
> bktr0: interrupting at irq 9
> bktr0: buffer size 3555328, addr 0x690000
> bktr: GPIO is 0x00fffffb
> subsystem 0x0070 0x13eb
> bktr0: Hauppauge Model 38061 B226
> Hauppauge WinCast/TV, Philips NTSC tuner, remote control.
> Brooktree product 0x0878 (miscellaneous multimedia, revision 0x02) at pci=
0 dev 12 fun
> ction 1 not configured
> isa0 at pcib0
> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
> com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
> pckbc0 at isa0 port 0x60-0x64
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> lpt1 at isa0 port 0x278-0x27b: polled
> sb0 at isa0 port 0x220-0x237 irq 5 drq 1 drq2 5: dsp v4.13
> audio0 at sb0: full duplex, mmap, independent
> midi0 at sb0: SB MIDI UART
> opl0 at sb0: model OPL3
> midi1 at opl0: SB Yamaha OPL3
> pcppi0 at isa0 port 0x61
> midi2 at pcppi0: PC speaker
> sysbeep0 at pcppi0
> isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
> npx0 at isa0 port 0xf0-0xff: using exception 16
> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
> isapnp0: no ISA Plug 'n Play devices found
> biomask efc5 netmask ffc5 ttymask ffc7
> scsibus0: waiting 2 seconds for devices to settle...
> probe(pcscp0:0:0): max sync rate 10.00MB/s
> sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST51080N, 0913> SCSI2 0/direct =
fixed
> sd0: 1030 MB, 4826 cyl, 4 head, 109 sec, 512 bytes/sect x 2109840 sectors
> sd0: no disk label
> boot device: wd0
> root on wd0a dumps on wd0b
> root file system type: ffs
>=20
>=20
> --=20
> DH/DSS key 0x69C2B37B/0xC34F4717 | http://ozone.dhs.org=20
> Fingerprint 4FAF 6F70 B407 08AE 86EF AC0E 130E 932C 69C2 B37B=20

Elfin.
----------------------
roskens@colltech.com