iwn0: fatal firmware error

["Jeremy C. Reed" <reed%reedmedia.net@localhost>]

Any ideas about this?

This is head from 201201200410Z on amd64.

The dmesg (twice) is at
http://reedmedia.net/~reed/dmesg.boot.txt

The package advertising says: Intel Centrino Wireless-N 1030 

iwn0 at pci2 dev 0 function 0: vendor 0x8086 product 0x008a (rev. 0x34)
iwn0: interrupting at ioapic0 pin 17
iwn0: MIMO 1T2R, BGN, address ac:72:89:ec:3b:1e
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 
24Mbps 36Mbps 48Mbps 54Mbps

iwn0: fatal firmware error
firmware error log:
  error type      = "UNKNOWN" (0x00001999)
  program counter = 0x00013688
  source line     = 0x0000012F
  error data      = 0x00000001000000A4
  branch link     = 0x0001367C0001367C
  interrupt link  = 0x0000C17A00000000
  time            = 28087
driver status:
  tx ring  0: qid=0  cur=0   queued=0  
  tx ring  1: qid=1  cur=0   queued=0  
  tx ring  2: qid=2  cur=0   queued=0  
  tx ring  3: qid=3  cur=0   queued=0  
  tx ring  4: qid=4  cur=2   queued=0  
  tx ring  5: qid=5  cur=0   queued=0  
  tx ring  6: qid=6  cur=0   queued=0  
  tx ring  7: qid=7  cur=0   queued=0  
  tx ring  8: qid=8  cur=0   queued=0  
  tx ring  9: qid=9  cur=0   queued=0  
  tx ring 10: qid=10 cur=0   queued=0  
  tx ring 11: qid=11 cur=0   queued=0  
  tx ring 12: qid=12 cur=0   queued=0 
  tx ring 13: qid=13 cur=0   queued=0  
  tx ring 14: qid=14 cur=0   queued=0  
  tx ring 15: qid=15 cur=0   queued=0  
  tx ring 16: qid=16 cur=0   queued=0  
  tx ring 17: qid=17 cur=0   queued=0  
  tx ring 18: qid=18 cur=0   queued=0  
  tx ring 19: qid=19 cur=0   queued=0  
  rx ring: cur=2
  802.11 state 0
iwn0: crystal calibration failed
iwn0: could not initialize hardware