This is a multi-part message in MIME format.

------=_NextPart_000_0018_01C0903F.C05F8A00
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit


----- Original Message -----
From: "Ignatios Souvatzis" <ignatios@cs.uni-bonn.de>

>> I have a "Compex ReadyLing Express 10/100 PCI" NIC but I don't know how
to
>> configure this thing under NetBSD 1.5.

>How do the kernel startup messages mention it?

I attach the ouput of  "dmesg" Does it helps?
/Petros < pesid@kav.forthnet.gr >


------=_NextPart_000_0018_01C0903F.C05F8A00
Content-Type: text/plain;
	name="output.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="output.txt"

NetBSD 1.5 (GENERIC) #1: Sun Nov 19 21:42:11 MET 2000
    fvdl@sushi:/work/trees/netbsd-1-5/sys/arch/i386/compile/GENERIC
cpu0: AMD K6-2 (586-class)
total memory =3D 127 MB
avail memory =3D 113 MB
using 1658 buffers containing 6632 KB of memory
BIOS32 rev. 0 found at 0xfb210
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT82C597 (Apollo VP3) Host-PCI Bridge (rev. =
0x04)
ppb0 at pci0 dev 1 function 0: VIA Technologies VT82C598 (Apollo MVP3) =
PCI-AGP (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Nvidia Corporation RIVA TNT (rev. 0x04)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C586 (Apollo VP) PCI-ISA Bridge (rev. 0x47)
pciide0 at pci0 dev 7 function 1: VIA Tech VT82C586A IDE Controller =
(rev. 0x06)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <ST320423A>
wd0: drive supports 32-sector pio transfers, lba addressing
wd0: 19536 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 40011300 =
sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wd1 at pciide0 channel 0 drive 1: <WDC AC28400R>
wd1: drive supports 16-sector pio transfers, lba addressing
wd1: 8063 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 16514064 =
sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data =
transfers)
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (using DMA data =
transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <CD-RW  CRX100E, , 1.0m> type 5 cdrom =
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd1 at atapibus0 drive 1: <SAMSUNG DVD-ROM SD-606F, , FS14> type 5 cdrom =
removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data =
transfers)
cd1(pciide0:1:1): using PIO mode 4, DMA mode 2 (using DMA data =
transfers)
uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller =
(rev. 0x02)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pchb1 at pci0 dev 7 function 3
pchb1: VIA Technologies VT82C586 (Apollo VP) Power Management Controller =
(rev. 0x10)
bktr0 at pci0 dev 8 function 0
bktr0: interrupting at irq 11
bktr0: Miro TV, Philips PAL I tuner.
Creative Labs SBLive! EMU 10000 (audio multimedia, revision 0x06) at =
pci0 dev 9 function 0 not configured
Creative Labs PCI Gameport Joystick (miscellaneous input, revision 0x06) =
at pci0 dev 9 function 1 not configured
rtk0 at pci0 dev 10 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at irq 9
rtk0: Ethernet address 00:c0:26:2b:cd:b7
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask ed65 netmask ef65 ttymask ffe7
ugen0 at uhub0 port 1
ugen0: OmniVision OV511+ Camera, rev 1.00/1.00, addr 2
wd0: no disk label
boot device: wd1
root on wd1a dumps on wd1b
root file system type: ffs
wd0: no disk label
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
wd0: no disk label

------=_NextPart_000_0018_01C0903F.C05F8A00--