----Next_Part(Fri_Nov_10_22:42:02_2000_001)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

	Hi. This is HEO writing.

> 	I got other PC/AT machine, and same ATM NIC I/F Card.
> 	So I will try the card following environment.
> 	PC---(ATM)---PC

	I tried it.
	So other PC/AT works fine....

	I attach the PC-A's dmesg.

----------
	PC-A:(Troubled)
	Celeron300A
	Tyan S1846S TSUNAMI ATX
	ENI ENI-155P-MF-C

	PC-B:(Work)
	P6-200MHz
	ASUS P/I-XP55T2P4S
	ENI ENI-155P-MF-C

HEO

----Next_Part(Fri_Nov_10_22:42:02_2000_001)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="PC-A.dmesg.txt"

NetBSD 1.5_BETA (GENERIC) #1: Sat Oct 21 13:59:18 MEST 2000
    fvdl@sushi:/work/trees/netbsd-1-5/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II (Celeron) (686-class)
total memory = 65152 KB
avail memory = 55272 KB
using 840 buffers containing 3360 KB of memory
BIOS32 rev. 0 found at 0xfdb50
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <FUJITSU MPB3032ATU>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 3093 MB, 6704 cyl, 15 head, 63 sec, 512 bytes/sect x 6335280 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: can't map i/o space
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
vga1 at pci0 dev 16 function 0: Matrox MGA Millennium 2064W ("Storm") (rev. 0x01)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
vr0 at pci0 dev 17 function 0: VIA VT3043 (Rhine) 10/100 Ethernet
vr0: interrupting at irq 11
vr0: Ethernet address: 00:90:cc:01:19:a8
dmphy0 at vr0 phy 1: DM9101 10/100 media interface, rev. 2
dmphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1 at pci0 dev 18 function 0: VIA VT3043 (Rhine) 10/100 Ethernet
vr1: interrupting at irq 9
vr1: Ethernet address: 00:90:cc:01:19:77
dmphy1 at vr1 phy 1: DM9101 10/100 media interface, rev. 2
dmphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
en0 at pci0 dev 19 function 0
en0: interrupting at irq 15
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: unexpected timeout in tx DMA test
en0: WARNING: WMAYBE DMA test failed 56 time(s)
en0: ATM midway v0, board IDs 6.0, Utopia (pipelined), 512KB on-board RAM
en0: maximum DMA burst length = 64 bytes (must align)
en0: 7 32KB receive buffers, 8 32KB transmit buffers allocated
en0: End Station Identifier (mac address) 00:20:ea:01:1c:d8
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask 75e5 netmask ffe5 ttymask ffe7
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

----Next_Part(Fri_Nov_10_22:42:02_2000_001)----