tech-kern archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: nouveau: NVIDIA GeForce 6800 works well in DVI but not in VGA
Le 2018-12-29 17:23, Frédéric Fauberteau a écrit :
Hi,
Thanks for the work on nouveau that works fine for me now.
I have just a glitch (diagonal noise of dotted line) when the card is
plugged through VGA cable.
I would identify the problem but I have no idea where and how to start
investigation. Any help would be gratefully appreciated.
# pcictl /dev/pci0 list | grep NVIDIA
001:00:0: NVIDIA GeForce 6800 (VGA display, revision 0xa1)
[ 1.0000000] NetBSD 8.99.29 (DEBUG) #0: Sat Dec 29 14:12:14 UTC 2018
[ 1.0000000] root@lurker:/usr/obj/sys/arch/i386/compile/DEBUG
[...]
[ 1.0074185] nouveau0 at pci1 dev 0 function 0: vendor 10de product
0041 (rev. 0xa1)
[ 1.0074185] nouveau0: info: NVIDIA NV40 (440100a1)
Ok, by looking at the xorg log, I noticed that my kernel is brand new
but my packages are not.
It rebuild them and I give feedback after.
[ 730.944] Build Operating System: NetBSD-7.1.2-i386 The NetBSD
Foundation
[ 730.946] Current Operating System: NetBSD lurker 8.99.29 NetBSD
8.99.29 (DEBUG)
================================================================================
#
# dmesg
#
================================================================================
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014,
2015, 2016, 2017,
[ 1.0000000] 2018 The NetBSD Foundation, Inc. All rights
reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All
rights reserved.
[ 1.0000000] NetBSD 8.99.29 (DEBUG) #0: Sat Dec 29 14:12:14 UTC 2018
[ 1.0000000] root@lurker:/usr/obj/sys/arch/i386/compile/DEBUG
[ 1.0000000] total memory = 2047 MB
[ 1.0000000] avail memory = 1991 MB
[ 1.0000000] rnd: seeded with 128 bits
[ 1.0000000] timecounter: Timecounters tick every 10.000 msec
[ 1.0000000] Kernelized RAIDframe activated
[ 1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done
[ 1.0000000] timecounter: Timecounter "i8254" frequency 1193182 Hz
quality 100
[ 1.0000030] MICRO-STAR INTERNATIONAL CO., LTD KM400-8235 ( )
[ 1.0000030] mainbus0 (root)
[ 1.0000030] ACPI: RSDP 0x00000000000F6DD0 000014 (v00 KM400 )
[ 1.0000030] ACPI: RSDT 0x000000007FFF3000 00002C (v01 KM400 AWRDACPI
42302E31 AWRD 00000000)
[ 1.0000030] ACPI: FACP 0x000000007FFF3040 000074 (v01 KM400 AWRDACPI
42302E31 AWRD 00000000)
[ 1.0000030] ACPI: DSDT 0x000000007FFF30C0 004E67 (v01 KM400 AWRDACPI
00001000 MSFT 0100000E)
[ 1.0000030] ACPI: FACS 0x000000007FFF0000 000040
[ 1.0000030] ACPI: APIC 0x000000007FFF7F40 00005A (v01 KM400 AWRDACPI
42302E31 AWRD 00000000)
[ 1.0000030] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 1.0000030] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x3,
24 pins
[ 1.0000030] cpu0 at mainbus0 apid 0
[ 1.0000030] cpu0: AMD Duron(tm) processor, id 0x681
[ 1.0000030] cpu0: package 0, core 0, smt 0
[ 1.0000030] acpi0 at mainbus0: Intel ACPICA 20180810
[ 1.0000030] acpi0: X/RSDT: OemId <KM400 ,AWRDACPI,42302e31>, AslId
<AWRD,00000000>
[ 1.0000030] acpi0: SCI interrupting at int 9
[ 1.0000030] acpi0: fixed power button present
[ 1.0000030] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz
quality 1000
[ 1.0072953] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
[ 1.0072953] acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
[ 1.0072953] MEM (PNP0C01) at acpi0 not configured
[ 1.0072953] PMIO (PNP0C02) at acpi0 not configured
[ 1.0072953] SYSR (PNP0C02) at acpi0 not configured
[ 1.0072953] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
[ 1.0072953] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
[ 1.0072953] midi0 at pcppi1: PC speaker
[ 1.0072953] sysbeep0 at pcppi1
[ 1.0072953] COPR (PNP0C04) at acpi0 not configured
[ 1.0072953] FDC0 (PNP0700) at acpi0 not configured
[ 1.0072953] UAR1 (PNP0501) at acpi0 not configured
[ 1.0072953] UAR2 (PNP0501) at acpi0 not configured
[ 1.0072953] ECP1 (PNP0401) at acpi0 not configured
[ 1.0072953] acpifan0 at acpi0 (FAN, PNP0C0B): ACPI Fan
[ 1.0072953] acpitz0 at acpi0 (THRM): cpu0
[ 1.0072953] acpitz0: active cooling level 0: 85.0C
[ 1.0072953] acpitz0: levels: critical 85.0 C, passive 85.0 C
[ 1.0072953] apm0 at acpi0: Power Management spec V1.2
[ 1.0072953] ACPI: Enabled 1 GPEs in block 00 to 0F
[ 1.0072953] attimer1: attached to pcppi1
[ 1.0072953] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.0072953] pci0: i/o space, memory space enabled, rd/line, rd/mult,
wr/inv ok
[ 1.0072953] pchb0 at pci0 dev 0 function 0: vendor 1106 product 3205
(rev. 0x00)
[ 1.0072953] agp0 at pchb0: aperture at 0xe0000000, size 0x8000000
[ 1.0072953] ppb0 at pci0 dev 1 function 0: vendor 1106 product b198
(rev. 0x00)
[ 1.0072953] pci1 at ppb0 bus 1
[ 1.0072953] pci1: i/o space, memory space enabled
[ 1.0072953] pci1: info: NVIDIA NV40 (440100a1)
[ 1.0072953] nouveau0 at pci1 dev 0 function 0: vendor 10de product
0041 (rev. 0xa1)
[ 1.0072953] nouveau0: info: NVIDIA NV40 (440100a1)
[ 1.0072953] nouveau0: info: bios: trying PRAMIN...
[ 1.0072953] nouveau0: info: bios: 00000120: NPDE signature (4e494f50)
unknown
[ 1.0072953] nouveau0: info: bios: 00000000: type 00, 65536 bytes
[ 1.0072953] nouveau0: info: bios: 00000000: checksum failed
[ 1.0072953] nouveau0: info: bios: scored 3
[ 1.0072953] nouveau0: info: bios: trying PROM...
[ 1.0072953] nouveau0: info: bios: 00000120: NPDE signature (4e494f50)
unknown
[ 1.0072953] nouveau0: info: bios: 00000000: type 00, 65536 bytes
[ 1.0072953] nouveau0: info: bios: scored 4
[ 1.0072953] nouveau0: info: bios: trying ACPI...
[ 1.0072953] nouveau0: info: bios: using image from PROM
[ 1.0072953] nouveau0: info: bios: BIT signature found
[ 1.0072953] nouveau0: info: bios: version 05.40.02.57.00
[ 1.0072953] nouveau0: info: i2c: ccb 00: type 00 drive 37 sense 36
share ff auxch ff
[ 1.0072953] nouveau0: info: i2c: ccb 01: type 00 drive 3f sense 3e
share ff auxch ff
[ 1.0072953] nouveau0: info: i2c: ccb 02: type 00 drive 51 sense 50
share ff auxch ff
[ 1.0072953] nouveau0: info: volt: VID 00: 1100000uv
[ 1.0072953] nouveau0: info: volt: VID 01: 1200000uv
[ 1.0072953] nouveau0: info: volt: VID 02: 1400000uv
[ 1.0072953] nouveau0: info: clk: 0f: 325000 KHz
[ 1.0072953] nouveau0: info: clk: 11: 325000 KHz
[ 1.0072953] nouveau0: info: clk: 12: 600000 KHz
[ 1.0072953] nouveau0: info: clk: 20: core 325 MHz shader 325 MHz
memory 600 MHz
[ 1.0072953] nouveau0: info: disp: dcb 0 0/0 not supported
[ 1.0072953] nouveau0: info: disp: dcb 1 0/0 not supported
[ 1.0072953] nouveau0: info: disp: dcb 2 0/2 not supported
[ 1.0072953] nouveau0: info: disp: dcb 3 0/1 not supported
[ 1.0072953] kern info: nouveau: DRM:00000000:00000080: init
running...
[ 1.0072953] nouveau0: notice: tmr: unknown input clock freq
[ 1.0072953] nouveau0: info: tmr: input frequency : 0Hz
[ 1.0072953] nouveau0: info: tmr: numerator : 00000428
[ 1.0072953] nouveau0: info: tmr: denominator : 0000007d
[ 1.0072953] nouveau0: info: tmr: timer frequency : 0Hz
[ 1.0072953] nouveau0: info: tmr: time low : 441990bb
[ 1.0072953] nouveau0: info: tmr: time high : 00000000
[ 1.0072953] nouveau0: info: fb: 512 MiB GDDR3
[ 1.0072953] nouveau0: info: fb: 189440 compression tags
[ 1.0072953] nouveau0: info: volt: current voltage: 1100000uv
[ 1.0072953] nouveau0: info: i2c: bus 0002: probing monitoring devices
[ 1.0072953] nouveau0: info: i2c: bus 0002: no devices found.
[ 1.0072953] nouveau0: info: i2c: bus 0002: probing monitoring devices
[ 1.0072953] nouveau0: info: i2c: bus 0002: 40ms delay instead of 10ms
[ 1.0072953] nouveau0: info: i2c: bus 0002: 40ms delay instead of 10ms
[ 1.0072953] nouveau0: info: i2c: bus 0002: 40ms delay instead of 10ms
[ 1.0072953] nouveau0: info: i2c: bus 0002: no devices found.
[ 1.0072953] nouveau0: info: therm: FAN control: PWM
[ 1.0072953] nouveau0: info: therm: parsing the fan table failed
[ 1.0072953] nouveau0: info: therm: internal sensor: no
[ 1.0072953] nouveau0: info: therm: programmed thresholds [ 135(2),
95(3), 135(2), 135(5) ]
[ 1.0072953] nouveau0: info: clk: 00: 27000 KHz
[ 1.0072953] nouveau0: info: clk: 01: 100000 KHz
[ 1.0072953] nouveau0: info: clk: 0f: 324000 KHz
[ 1.0072953] nouveau0: info: clk: 11: 324000 KHz
[ 1.0072953] nouveau0: info: clk: 12: 598500 KHz
[ 1.0072953] nouveau0: info: clk: --: core 324 MHz shader 324 MHz
memory 598 MHz
[ 1.0072953] kern info: nouveau: DRM:00000000:00000080: init
children...
[ 1.0072953] kern info: nouveau: DRM:00000000:00000080: init completed
in 10928us
[ 1.0072953] Zone kernel: Available graphics memory: 780168 kiB
[ 1.0072953] nouveau0: info: DRM: VRAM: 508 MiB
[ 1.0072953] nouveau0: info: DRM: GART: 128 MiB
[ 1.0072953] nouveau0: info: DRM: TMDS table version 1.1
[ 1.0072953] nouveau0: info: DRM: DCB version 3.0
[ 1.0072953] nouveau0: info: DRM: DCB outp 00: 01000300 00000028
[ 1.0072953] nouveau0: info: DRM: DCB outp 01: 02011310 00000028
[ 1.0072953] nouveau0: info: DRM: DCB outp 02: 01011312 00000000
[ 1.0072953] nouveau0: info: DRM: DCB outp 03: 020223f1 0080c030
[ 1.0072953] nouveau0: info: DRM: DCB conn 00: 1000
[ 1.0072953] nouveau0: info: DRM: DCB conn 01: 1130
[ 1.0072953] nouveau0: info: DRM: DCB conn 02: 0212
[ 1.0072953] kern info: nouveau: DRM:00000000:00000046: init
running...
[ 1.0072953] kern info: nouveau: DRM:00000000:00000046: init
children...
[ 1.0072953] kern info: nouveau: DRM:00000000:00000046: init completed
in 112us
[ 1.0072953] nouveau0: info: DRM: Saving VGA fonts
[ 1.0072953] nouveau0: autoconfiguration error: warn: DRM: unknown
connector type 12
[ 1.0072953] kern info: [drm] Supports vblank timestamp caching Rev 2
(21.10.2013).
[ 1.0072953] kern info: [drm] Driver supports precise vblank timestamp
query.
[ 1.0072953] nouveau0: info: DRM: 0xD49C: Parsing digital output
script table
[ 1.0072953] kern info: nouveau: DRM:00000000:00000002: init
running...
[ 1.0072953] kern info: nouveau: DRM:00000000:00000002: init
children...
[ 1.0072953] kern info: nouveau: DRM:00000000:00000002: init completed
in 113us
[ 1.0072953] kern info: nouveau: DRM:00000000:00000002: fini
children...
[ 1.0072953] kern info: nouveau: DRM:00000000:00000002: fini
running...
[ 1.0072953] kern info: nouveau: DRM:00000000:00000002: fini completed
in 111us
[ 1.0072953] kern info: nouveau: DRM:00000000:00000002: destroy
children...
[ 1.0072953] kern info: nouveau: DRM:00000000:00000002: destroy
running...
[ 1.0072953] kern info: nouveau: DRM:00000000:00000002: destroy
completed in 120us...
[ 1.0072953] kern info: nouveau: DRM:00000000:00000002: init
running...
[ 1.0072953] kern info: nouveau: DRM:00000000:00000002: init
children...
[ 1.0072953] kern info: nouveau: DRM:00000000:00000002: init completed
in 113us
[ 1.0072953] kern info: nouveau: DRM:00000000:0000406e: init
running...
[ 1.0072953] kern info: nouveau: DRM:00000000:0000406e: init
children...
[ 1.0072953] kern info: nouveau: DRM:00000000:0000406e: init completed
in 116us
[ 1.0072953] kern info: nouveau: DRM:80000002:0000003d: init
running...
[ 1.0072953] kern info: nouveau: DRM:80000002:0000003d: init
children...
[ 1.0072953] kern info: nouveau: DRM:80000002:0000003d: init completed
in 113us
[ 1.0072953] kern info: nouveau: DRM:80000003:0000003d: init
running...
[ 1.0072953] kern info: nouveau: DRM:80000003:0000003d: init
children...
[ 1.0072953] kern info: nouveau: DRM:80000003:0000003d: init completed
in 112us
[ 1.0072953] kern info: nouveau: DRM:8000000f:00000002: init
running...
[ 1.0072953] kern info: nouveau: DRM:8000000f:00000002: init
children...
[ 1.0072953] kern info: nouveau: DRM:8000000f:00000002: init completed
in 112us
[ 1.0072953] kern info: nouveau: DRM:55550000:fffffffb: init
running...
[ 1.0072953] kern info: nouveau: DRM:00000000:00000000: init
running...
[ 1.0072953] kern info: nouveau: DRM:00000000:00000000: init
children...
[ 1.0072953] kern info: nouveau: DRM:00000000:00000000: init completed
in 112us
[ 1.0072953] kern info: nouveau: DRM:55550000:fffffffb: init
children...
[ 1.0072953] kern info: nouveau: DRM:55550000:fffffffb: init completed
in 464us
[ 1.0072953] kern info: nouveau: DRM:80000006:0000003d: init
running...
[ 1.0072953] kern info: nouveau: DRM:80000006:0000003d: init
children...
[ 1.0072953] kern info: nouveau: DRM:80000006:0000003d: init completed
in 112us
[ 1.0072953] kern info: nouveau: DRM:00000039:00000039: init
running...
[ 1.0072953] kern info: nouveau: DRM:00000000:00000000: init
running...
[ 1.0072953] kern info: nouveau: DRM:00000000:00000000: init
children...
[ 1.0072953] kern info: nouveau: DRM:00000000:00000000: init completed
in 112us
[ 1.0072953] kern info: nouveau: DRM:00000039:00000039: init
children...
[ 1.0072953] kern info: nouveau: DRM:00000039:00000039: init completed
in 469us
[ 1.0072953] nouveau0: info: DRM: MM: using M2MF for buffer copies
[ 1.0072953] nouveau0: info: DRM: Setting dpms mode 3 on TV encoder
(output 3)
[ 1.0072953] nouveaufb0 at nouveau0
[ 1.0072953] nouveaufb0: framebuffer at 0xdd454000, size 1680x1050,
depth 32, stride 6912
[ 1.0072953] wsdisplay0 at nouveaufb0 kbdmux 1: console (default,
vt100 emulation)
[ 1.0072953] wsmux1: connecting to wsdisplay0
[ 1.0072953] fwohci0 at pci0 dev 6 function 0: vendor 11c1 product
5811 (rev. 0x61)
[ 1.0072953] fwohci0: interrupting at ioapic0 pin 17
[ 1.0072953] fwohci0: OHCI version 1.0 (ROM=1)
[ 1.0072953] fwohci0: No. of Isochronous channels is 8.
[ 1.0072953] fwohci0: EUI64 00:60:1d:00:00:00:09:1d
[ 1.0072953] fwohci0: Phy 1394a available S400, 3 ports.
[ 1.0072953] fwohci0: Link S400, max_rec 2048 bytes.
[ 1.0072953] ieee1394if0 at fwohci0: IEEE1394 bus
[ 1.0072953] fwip0 at ieee1394if0: IP over IEEE1394
[ 1.0072953] fwohci0: Initiate bus reset
[ 1.0072953] fwohci0: Clear PME# now
[ 1.0072953] bktr0 at pci0 dev 7 function 0
[ 1.0072953] bktr0: interrupting at ioapic0 pin 18
[ 1.0072953] bktr0: Hauppauge Model 44346 C209
[ 1.0072953] bktr0: Detected a MSP3415D-B3 at 0x80
[ 1.0072953] bktr0: Hauppauge WinCast/TV, Philips SECAM tuner,
msp3400c stereo, remote control.
[ 1.0072953] vendor 109e product 0878 (miscellaneous multimedia,
revision 0x11) at pci0 dev 7 function 1 not configured
[ 1.0072953] viaide0 at pci0 dev 15 function 0: VIA Technologies
VT8237 SATA Controller (rev. 0x80)
[ 1.0072953] viaide0: bus-master DMA support present
[ 1.0072953] viaide0: primary channel wired to native-PCI mode
[ 1.0072953] viaide0: using ioapic0 pin 20 for native-PCI interrupt
[ 1.0072953] atabus0 at viaide0 channel 0
[ 1.0072953] viaide0: secondary channel wired to native-PCI mode
[ 1.0072953] atabus1 at viaide0 channel 1
[ 1.0072953] viaide1 at pci0 dev 15 function 1
[ 1.0072953] viaide1: VIA Technologies VT8237 ATA133 controller
[ 1.0072953] viaide1: bus-master DMA support present
[ 1.0072953] viaide1: primary channel configured to compatibility mode
[ 1.0072953] viaide1: primary channel interrupting at ioapic0 pin 14
[ 1.0072953] atabus2 at viaide1 channel 0
[ 1.0072953] viaide1: secondary channel configured to compatibility
mode
[ 1.0072953] viaide1: secondary channel interrupting at ioapic0 pin 15
[ 1.0072953] atabus3 at viaide1 channel 1
[ 1.0072953] uhci0 at pci0 dev 16 function 0: vendor 1106 product 3038
(rev. 0x81)
[ 1.0072953] uhci0: interrupting at ioapic0 pin 21
[ 1.0072953] usb0 at uhci0: USB revision 1.0
[ 1.0072953] uhci1 at pci0 dev 16 function 1: vendor 1106 product 3038
(rev. 0x81)
[ 1.0072953] uhci1: interrupting at ioapic0 pin 21
[ 1.0072953] usb1 at uhci1: USB revision 1.0
[ 1.0072953] uhci2 at pci0 dev 16 function 2: vendor 1106 product 3038
(rev. 0x81)
[ 1.0072953] uhci2: interrupting at ioapic0 pin 21
[ 1.0072953] usb2 at uhci2: USB revision 1.0
[ 1.0072953] uhci3 at pci0 dev 16 function 3: vendor 1106 product 3038
(rev. 0x81)
[ 1.0072953] uhci3: interrupting at ioapic0 pin 21
[ 1.0072953] usb3 at uhci3: USB revision 1.0
[ 1.0072953] ehci0 at pci0 dev 16 function 4: vendor 1106 product 3104
(rev. 0x86)
[ 1.0072953] ehci0: interrupting at ioapic0 pin 21
[ 1.0072953] ehci0: dropped intr workaround enabled
[ 1.0072953] ehci0: EHCI version 1.0
[ 1.0072953] ehci0: 4 companion controllers, 2 ports each: uhci0 uhci1
uhci2 uhci3
[ 1.0072953] usb4 at ehci0: USB revision 2.0
[ 1.0072953] viapcib0 at pci0 dev 17 function 0: vendor 1106 product
3227 (rev. 0x00)
[ 1.0072953] viapcib0: SMBus found at 0x5000 (revision 0x0)
[ 1.0072953] iic0 at viapcib0: I2C bus
[ 1.0072953] auvia0 at pci0 dev 17 function 5: VIA Technologies VT8237
AC'97 Audio (rev 0x60)
[ 1.0072953] auvia0: interrupting at ioapic0 pin 22
[ 1.0072953] auvia0: ac97: VIA Technologies unknown (0x56494170)
codec; headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
[ 1.0072953] auvia0: ac97: ext id
0x9c7<AC97_23,LDAC,SDAC,CDAC,SPDIF,DRA,VRA>
[ 1.0072953] audio0 at auvia0: full duplex, playback, capture, mmap,
independent
[ 1.0072953] auvia0: Virtual format configured - Format SLINEAR,
precision 16, channels 2, frequency 48000
[ 1.0072953] auvia0: Latency: 8 milliseconds
[ 1.0072953] vr0 at pci0 dev 18 function 0: vendor 1106 product 3065
(rev. 0x78)
[ 1.0072953] vr0: interrupting at ioapic0 pin 23
[ 1.0072953] vr0: Ethernet address 00:11:09:c1:44:a6
[ 1.0072953] ukphy0 at vr0 phy 1: OUI 0x0002c6, model 0x0032, rev. 10
[ 1.0072953] ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
auto
[ 1.0072953] isa0 at viapcib0
[ 1.0072953] lpt0 at isa0 port 0x378-0x37b irq 7
[ 1.0072953] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working
fifo
[ 1.0072953] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working
fifo
[ 1.0072953] pckbc0 at isa0 port 0x60-0x64
[ 1.0072953] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
[ 1.0072953] acpicpu0 at cpu0: ACPI CPU
[ 1.0072953] acpicpu0: C1: HLT, lat 0 us, pow 0 mW
[ 1.0072953] fwohci0: BUS reset
[ 1.0072953] fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
[ 1.0072953] ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
[ 1.0072953] ieee1394if0: bus manager 0
[ 1.0072953] timecounter: Timecounter "clockinterrupt" frequency 100
Hz quality 0
[ 1.6881290] uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class
9/0, rev 1.00/1.00, addr 1
[ 1.6881290] uhub0: 2 ports with 2 removable, self powered
[ 1.6881290] uhub1 at usb1: NetBSD (0000) UHCI root hub (0000), class
9/0, rev 1.00/1.00, addr 1
[ 1.6881290] uhub1: 2 ports with 2 removable, self powered
[ 1.6881290] uhub2 at usb2: NetBSD (0000) UHCI root hub (0000), class
9/0, rev 1.00/1.00, addr 1
[ 1.6881290] uhub2: 2 ports with 2 removable, self powered
[ 1.6881290] uhub3 at usb3: NetBSD (0000) UHCI root hub (0000), class
9/0, rev 1.00/1.00, addr 1
[ 1.6881290] uhub3: 2 ports with 2 removable, self powered
[ 1.7681850] uhub4 at usb4: NetBSD (0000) EHCI root hub (0000), class
9/0, rev 2.00/1.00, addr 1
[ 1.7681850] uhub4: 8 ports with 8 removable, self powered
[ 1.8182187] viaide0 port 0: device present, speed: 1.5Gb/s
[ 1.8282328] IPsec: Initialized Security Association Processing.
[ 1.9182862] wd0 at atabus0 drive 0
[ 1.9182862] wd0: <ST3250410AS>
[ 1.9182862] wd0: drive supports 16-sector PIO transfers, LBA48
addressing
[ 1.9182862] wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect
x 488397168 sectors
[ 1.9583161] wd0: GPT GUID: 22123798-18b8-4299-942e-b6424d6064f1
[ 1.9583161] dk0 at wd0: "nbsdroot", 41943040 blocks at 34, type: ffs
[ 1.9583161] dk1 at wd0: "nbsdswap", 8388608 blocks at 41943074, type:
swap
[ 1.9583161] wd0: 32-bit data port
[ 1.9583161] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 6 (Ultra/133), NCQ (32 tags)
[ 1.9683286] wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6
(Ultra/133) (using DMA)
[ 2.8089103] ehci0: handing over low speed device on port 4 to uhci1
[ 4.8003058] uhidev0 at uhub1 port 2 configuration 1 interface 0
[ 4.8003058] uhidev0: vendor 04d9 (0x4d9) USB Keyboard (0x1603), rev
1.10/3.10, addr 2, iclass 3/1
[ 4.8503410] ukbd0 at uhidev0: 8 Variable keys, 6 Array codes
[ 4.9303969] wd1 at atabus2 drive 0
[ 4.9303969] wd1: <ST380022A>
[ 4.9303969] wd1: drive supports 16-sector PIO transfers, LBA
addressing
[ 4.9303969] wd1: 76319 MB, 155061 cyl, 16 head, 63 sec, 512
bytes/sect x 156301488 sectors
[ 4.9704361] wd1: 32-bit data port
[ 4.9704361] wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 5 (Ultra/100)
[ 4.9704361] wd1(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 5
(Ultra/100) (using DMA)
[ 4.9704361] atapibus0 at atabus3: 2 targets
[ 4.9704361] cd0 at atapibus0 drive 1: <ASUS DRW-2014S1, , 1.01>
cdrom removable
[ 4.9808637] cd0: 32-bit data port
[ 4.9808637] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 4 (Ultra/66)
[ 4.9808637] wd2 at atabus3 drive 0
[ 4.9808637] wd2: <WDC WD400EB-00CPF0>
[ 4.9808637] wd2: drive supports 16-sector PIO transfers, LBA
addressing
[ 4.9808637] wd2: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect
x 78165360 sectors
[ 5.0304697] wd2: GPT GUID: 5d448892-ff01-4021-b17f-1bebf931e8ce
[ 5.0304697] wd2: 32-bit data port
[ 5.0404894] wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 5 (Ultra/100)
[ 5.0404894] wd2(viaide1:1:0): using PIO mode 4, Ultra-DMA mode 5
(Ultra/100) (using DMA)
[ 5.0404894] cd0(viaide1:1:1): using PIO mode 4, Ultra-DMA mode 4
(Ultra/66) (using DMA)
[ 5.1205340] WARNING: 1 error while detecting hardware; check system
log.
[ 5.1205340] boot device: wd0
[ 5.1205340] root on dk0 dumps on dk1
[ 5.1505529] mountroot: trying lfs...
[ 5.1505529] mountroot: trying ext2fs...
[ 5.1505529] mountroot: trying ffs...
[ 5.1605636] root file system type: ffs
[ 5.1605636] kern.module.path=/stand/i386/8.99.29/modules
[ 5.1905817] init: copying out path `/sbin/init' 11
[ 5.2606328] wskbd0 at ukbd0: console keyboard, using wsdisplay0
[ 5.2606328] uhidev1 at uhub1 port 2 configuration 1 interface 1
[ 5.2906547] WARNING: module error: vfs load failed for `usbverbose',
error 2
[ 5.2906547] uhidev1: vendor 04d9 (0x4d9) USB Keyboard (0x1603), rev
1.10/3.10, addr 2, iclass 3/0
[ 5.3506965] uhidev1: 2 report ids
[ 5.3506965] uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
[ 5.3707213] uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
[ 11.1347536] vr0: link state UP (was UNKNOWN)
[ 11.8652568] vr0: link state DOWN (was UP)
[ 15.8680608] vr0: link state UP (was DOWN)
[ 18.9001920] wsdisplay0: screen 1 added (default, vt100 emulation)
[ 18.9102078] wsdisplay0: screen 2 added (default, vt100 emulation)
[ 18.9202244] wsdisplay0: screen 3 added (default, vt100 emulation)
[ 18.9202244] wsdisplay0: screen 4 added (default, vt100 emulation)
[ 234.8815293] in6_ifadd: 2a01:e35:8b4a:9540:211:9ff:fec1:44a6 is
already configured
================================================================================
#
# Xorg.0.log
#
================================================================================
[ 730.941]
X.Org X Server 1.20.0
X Protocol Version 11, Revision 0
[ 730.944] Build Operating System: NetBSD-7.1.2-i386 The NetBSD
Foundation
[ 730.946] Current Operating System: NetBSD lurker 8.99.29 NetBSD
8.99.29 (DEBUG) #0: Sat Dec 29 14:12:14 UTC 2018
root@lurker:/usr/obj/sys/arch/i386/compile/DEBUG i386
[ 730.949] Build Date: 21 July 2018 08:11:42AM
[ 730.950]
[ 730.951] Current version of pixman: 0.34.0
[ 730.953] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 730.954] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 730.966] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 29
15:20:13 2018
[ 730.968] (==) Using config file: "/etc/xorg.conf"
[ 730.969] (==) No Layout section. Using the first Screen section.
[ 730.969] (==) No screen section available. Using defaults.
[ 730.969] (**) |-->Screen "Default Screen Section" (0)
[ 730.969] (**) | |-->Monitor "<default monitor>"
[ 730.971] (==) No device specified for screen "Default Screen
Section".
Using the first device section listed.
[ 730.971] (**) | |-->Device "card0"
[ 730.971] (==) No monitor specified for screen "Default Screen
Section".
Using a default monitor configuration.
[ 730.971] (==) Not automatically adding devices
[ 730.971] (==) Not automatically enabling devices
[ 730.971] (==) Not automatically adding GPU devices
[ 730.971] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 730.972] (WW) The directory "/usr/local/pkg/share/fonts/X11/100dpi"
does not exist.
[ 730.972] Entry deleted from font path.
[ 730.972] (WW) The directory "/usr/local/pkg/share/fonts/X11/75dpi"
does not exist.
[ 730.972] Entry deleted from font path.
[ 730.972] (WW) The directory "/usr/local/pkg/share/fonts/X11/misc"
does not exist.
[ 730.972] Entry deleted from font path.
[ 730.972] (WW) The directory "/usr/local/pkg/share/fonts/X11/TTF"
does not exist.
[ 730.972] Entry deleted from font path.
[ 730.972] (WW) The directory "/usr/local/pkg/share/fonts/X11/Type1"
does not exist.
[ 730.973] Entry deleted from font path.
[ 730.973] (WW) The directory
"/usr/local/pkg/share/fonts/X11/cyrillic" does not exist.
[ 730.973] Entry deleted from font path.
[ 730.973] (WW) The directory "/usr/local/pkg/share/fonts/X11/misc"
does not exist.
[ 730.973] Entry deleted from font path.
[ 730.974] (WW) The directory "/usr/pkg/share/fonts/X11/OTF" does not
exist.
[ 730.974] Entry deleted from font path.
[ 730.975] (WW) `fonts.dir' not found (or not valid) in
"/usr/pkg/share/fonts/X11/cyrillic".
[ 730.975] Entry deleted from font path.
[ 730.975] (Run 'mkfontdir' on "/usr/pkg/share/fonts/X11/cyrillic").
[ 730.975] (WW) The directory "/usr/pkg/lib/X11/fonts/misc" does not
exist.
[ 730.975] Entry deleted from font path.
[ 730.976] (WW) The directory "/usr/pkg/lib/X11/fonts/TTF" does not
exist.
[ 730.976] Entry deleted from font path.
[ 730.976] (WW) The directory "/usr/pkg/lib/X11/fonts/OTF" does not
exist.
[ 730.976] Entry deleted from font path.
[ 730.976] (WW) The directory "/usr/pkg/lib/X11/fonts/Type1" does not
exist.
[ 730.976] Entry deleted from font path.
[ 730.976] (WW) The directory "/usr/pkg/lib/X11/fonts/100dpi" does not
exist.
[ 730.976] Entry deleted from font path.
[ 730.977] (WW) The directory "/usr/pkg/lib/X11/fonts/75dpi" does not
exist.
[ 730.977] Entry deleted from font path.
[ 730.977] (WW) The directory "/usr/pkg/lib/X11/fonts/cyrillic" does
not exist.
[ 730.977] Entry deleted from font path.
[ 730.977] (**) FontPath set to:
/usr/pkg/share/fonts/X11/misc,
/usr/pkg/share/fonts/X11/TTF,
/usr/pkg/share/fonts/X11/Type1,
/usr/pkg/share/fonts/X11/100dpi,
/usr/pkg/share/fonts/X11/75dpi
[ 730.977] (==) ModulePath set to "/usr/pkg/lib/xorg/modules"
[ 730.977] (==) |-->Input Device "mouse0"
[ 730.977] (==) |-->Input Device "keyboard0"
[ 730.977] (==) No Layout section. Using the first mouse device.
[ 730.978] (==) No Layout section. Using the first keyboard device.
[ 730.978] (II) Loader magic: 0x82564a0
[ 730.978] (II) Module ABI versions:
[ 730.978] X.Org ANSI C Emulation: 0.4
[ 730.978] X.Org Video Driver: 24.0
[ 730.978] X.Org XInput driver : 24.1
[ 730.978] X.Org Server Extension : 10.0
[ 730.988] (--) PCI: (0@0:7:0) 109e:036e:0070:13eb rev 17, Mem @
0xeb001000/4096
[ 730.988] (--) PCI:*(1@1:0:0) 10de:0041:1acc:680a rev 161, Mem @
0xe8000000/16777216, 0xc0000000/536870912, 0xe9000000/16777216
[ 730.989] (II) LoadModule: "glx"
[ 730.992] (II) Loading /usr/pkg/lib/xorg/modules/extensions/libglx.so
[ 731.011] (II) Module glx: vendor="X.Org Foundation"
[ 731.011] compiled for 1.20.0, module version = 1.0.0
[ 731.011] ABI class: X.Org Server Extension, version 10.0
[ 731.012] (II) LoadModule: "nouveau"
[ 731.013] (II) Loading
/usr/pkg/lib/xorg/modules/drivers/nouveau_drv.so
[ 731.015] (II) Module nouveau: vendor="X.Org Foundation"
[ 731.015] compiled for 1.20.0, module version = 1.0.15
[ 731.015] Module class: X.Org Video Driver
[ 731.015] ABI class: X.Org Video Driver, version 24.0
[ 731.015] (II) LoadModule: "mouse"
[ 731.021] (II) Loading /usr/pkg/lib/xorg/modules/input/mouse_drv.so
[ 731.022] (II) Module mouse: vendor="X.Org Foundation"
[ 731.022] compiled for 1.20.0, module version = 1.9.3
[ 731.022] Module class: X.Org XInput Driver
[ 731.022] ABI class: X.Org XInput driver, version 24.1
[ 731.022] (II) LoadModule: "kbd"
[ 731.028] (II) Loading /usr/pkg/lib/xorg/modules/input/kbd_drv.so
[ 731.029] (II) Module kbd: vendor="X.Org Foundation"
[ 731.029] compiled for 1.20.0, module version = 1.9.0
[ 731.029] Module class: X.Org XInput Driver
[ 731.029] ABI class: X.Org XInput driver, version 24.1
[ 731.029] (II) NOUVEAU driver Date: Fri Apr 21 14:41:17 2017 -0400
[ 731.029] (II) NOUVEAU driver for NVIDIA chipset families :
[ 731.029] RIVA TNT (NV04)
[ 731.030] RIVA TNT2 (NV05)
[ 731.030] GeForce 256 (NV10)
[ 731.030] GeForce 2 (NV11, NV15)
[ 731.031] GeForce 4MX (NV17, NV18)
[ 731.031] GeForce 3 (NV20)
[ 731.031] GeForce 4Ti (NV25, NV28)
[ 731.032] GeForce FX (NV3x)
[ 731.032] GeForce 6 (NV4x)
[ 731.032] GeForce 7 (G7x)
[ 731.033] GeForce 8 (G8x)
[ 731.033] GeForce GTX 200 (NVA0)
[ 731.033] GeForce GTX 400 (NVC0)
[ 731.034] (--) Using wscons driver on /dev/ttyE1 in pcvt
compatibility mode (version 3.32)
[ 731.088] (II) [drm] nouveau interface version: 1.3.1
[ 731.096] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
support
[ 731.096] (II) Loading sub module "dri2"
[ 731.096] (II) LoadModule: "dri2"
[ 731.097] (II) Module "dri2" already built-in
[ 731.106] (--) NOUVEAU(0): Chipset: "NVIDIA NV40"
[ 731.106] (II) NOUVEAU(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 731.106] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 731.106] (==) NOUVEAU(0): RGB weight 888
[ 731.106] (==) NOUVEAU(0): Default visual is TrueColor
[ 731.107] (**) NOUVEAU(0): Option "HWcursor" "on"
[ 731.107] (**) NOUVEAU(0): Option "ShadowFB" "off"
[ 731.107] (**) NOUVEAU(0): Option "PageFlip" "on"
[ 731.107] (**) NOUVEAU(0): Option "AccelMethod" "none"
[ 731.107] (**) NOUVEAU(0): Option "DRI" "2"
[ 731.107] (**) NOUVEAU(0): Using HW cursor
[ 731.107] (**) NOUVEAU(0): Allowed maximum DRI level 2.
[ 731.108] (**) NOUVEAU(0): Page flipping enabled
[ 731.108] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 731.108] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 731.108] (II) NOUVEAU(0): Initializing outputs ...
[ 731.129] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 731.140] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 731.151] (II) NOUVEAU(0): Output TV-1 has no monitor section
[ 731.151] (II) NOUVEAU(0): 3 crtcs needed for screen.
[ 731.151] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 731.152] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 731.174] (II) NOUVEAU(0): EDID for output VGA-1
[ 731.174] (II) NOUVEAU(0): Manufacturer: VSC Model: 6b20 Serial#:
16843009
[ 731.174] (II) NOUVEAU(0): Year: 2007 Week: 46
[ 731.174] (II) NOUVEAU(0): EDID Version: 1.3
[ 731.174] (II) NOUVEAU(0): Analog Display Input, Input Voltage
Level: 0.700/0.300 V
[ 731.174] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
[ 731.175] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 49 vert.: 29
[ 731.175] (II) NOUVEAU(0): Gamma: 2.20
[ 731.175] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[ 731.175] (II) NOUVEAU(0): Default color space is primary color space
[ 731.175] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 731.175] (II) NOUVEAU(0): redX: 0.651 redY: 0.330 greenX: 0.267
greenY: 0.630
[ 731.175] (II) NOUVEAU(0): blueX: 0.145 blueY: 0.080 whiteX: 0.313
whiteY: 0.329
[ 731.175] (II) NOUVEAU(0): Supported established timings:
[ 731.176] (II) NOUVEAU(0): 720x400@70Hz
[ 731.176] (II) NOUVEAU(0): 640x480@60Hz
[ 731.176] (II) NOUVEAU(0): 640x480@67Hz
[ 731.176] (II) NOUVEAU(0): 640x480@72Hz
[ 731.176] (II) NOUVEAU(0): 640x480@75Hz
[ 731.176] (II) NOUVEAU(0): 800x600@56Hz
[ 731.176] (II) NOUVEAU(0): 800x600@60Hz
[ 731.176] (II) NOUVEAU(0): 800x600@72Hz
[ 731.176] (II) NOUVEAU(0): 800x600@75Hz
[ 731.176] (II) NOUVEAU(0): 832x624@75Hz
[ 731.176] (II) NOUVEAU(0): 1024x768@60Hz
[ 731.176] (II) NOUVEAU(0): 1024x768@70Hz
[ 731.176] (II) NOUVEAU(0): 1024x768@75Hz
[ 731.177] (II) NOUVEAU(0): 1280x1024@75Hz
[ 731.177] (II) NOUVEAU(0): 1152x864@75Hz
[ 731.177] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 731.177] (II) NOUVEAU(0): Supported standard timings:
[ 731.177] (II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60
vid: 179
[ 731.177] (II) NOUVEAU(0): #1: hsize: 1600 vsize 1200 refresh: 60
vid: 16553
[ 731.177] (II) NOUVEAU(0): #2: hsize: 1440 vsize 900 refresh: 60
vid: 149
[ 731.177] (II) NOUVEAU(0): #3: hsize: 1400 vsize 1050 refresh: 60
vid: 16528
[ 731.177] (II) NOUVEAU(0): #4: hsize: 1280 vsize 1024 refresh: 60
vid: 32897
[ 731.177] (II) NOUVEAU(0): #5: hsize: 1280 vsize 960 refresh: 60
vid: 16513
[ 731.177] (II) NOUVEAU(0): #6: hsize: 1152 vsize 864 refresh: 75
vid: 20337
[ 731.178] (II) NOUVEAU(0): Supported detailed timing:
[ 731.178] (II) NOUVEAU(0): clock: 146.2 MHz Image Size: 495 x 291
mm
[ 731.178] (II) NOUVEAU(0): h_active: 1680 h_sync: 1784 h_sync_end
1960 h_blank_end 2240 h_border: 0
[ 731.178] (II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end
1059 v_blanking: 1089 v_border: 0
[ 731.178] (II) NOUVEAU(0): Serial No: QRB074601301
[ 731.178] (II) NOUVEAU(0): Ranges: V min: 50 V max: 75 Hz, H min: 24
H max: 82 kHz, PixClock max 175 MHz
[ 731.178] (II) NOUVEAU(0): Monitor name: VX2240w
[ 731.178] (II) NOUVEAU(0): EDID (in hex):
[ 731.178] (II) NOUVEAU(0): 00ffffffffffff005a63206b01010101
[ 731.179] (II) NOUVEAU(0): 2e1101030e311d782ee525a65444a125
[ 731.179] (II) NOUVEAU(0): 145054bfef80b300a940950090408180
[ 731.179] (II) NOUVEAU(0): 8140714f010121399030621a274068b0
[ 731.179] (II) NOUVEAU(0): 3600ef231100001c000000ff00515242
[ 731.179] (II) NOUVEAU(0): 3037343630313330310a000000fd0032
[ 731.179] (II) NOUVEAU(0): 4b185211000a202020202020000000fc
[ 731.179] (II) NOUVEAU(0): 00565832323430770a2020202020006c
[ 731.179] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 731.179] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680
1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 731.180] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600
1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 731.180] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400
1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 731.180] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 731.180] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 731.180] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440
1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 731.180] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280
1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 731.180] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152
1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 731.180] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024
1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 731.180] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024
1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 731.181] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024
1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 731.181] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864
928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 731.181] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856
976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 731.181] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 731.181] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 731.181] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 731.181] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 731.181] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664
704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 731.181] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704
768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 731.181] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 731.181] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 731.192] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 731.202] (II) NOUVEAU(0): EDID for output TV-1
[ 731.202] (II) NOUVEAU(0): Output VGA-1 connected
[ 731.203] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[ 731.203] (II) NOUVEAU(0): Output TV-1 disconnected
[ 731.203] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 731.203] (II) NOUVEAU(0): Output VGA-1 using initial mode 1680x1050
+0+0
[ 731.203] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 731.203] (II) NOUVEAU(0): Virtual size is 1680x1050 (pitch 0)
[ 731.203] (**) NOUVEAU(0): Driver mode "1680x1050": 146.2 MHz
(scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 731.203] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680
1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 731.203] (**) NOUVEAU(0): Driver mode "1600x1200": 162.0 MHz
(scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
[ 731.204] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600
1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 731.204] (**) NOUVEAU(0): Driver mode "1400x1050": 121.8 MHz
(scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 731.204] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400
1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 731.204] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz
(scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 731.204] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 731.204] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz
(scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 731.204] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 731.204] (**) NOUVEAU(0): Driver mode "1440x900": 106.5 MHz (scaled
from 0.0 MHz), 55.9 kHz, 59.9 Hz
[ 731.204] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440
1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 731.205] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled
from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 731.205] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280
1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 731.205] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled
from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 731.205] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152
1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 731.205] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled
from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 731.205] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024
1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 731.205] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled
from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 731.205] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024
1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 731.205] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled
from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 731.205] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024
1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 731.205] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled
from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 731.206] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864
928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 731.206] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled
from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 731.206] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856
976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 731.206] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled
from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 731.206] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 731.206] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled
from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 731.206] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 731.206] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled
from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 731.206] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 731.206] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled
from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 731.207] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 731.207] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled
from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 731.207] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664
704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 731.207] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled
from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 731.207] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704
768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 731.207] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled
from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 731.207] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 731.207] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled
from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 731.207] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 731.207] (==) NOUVEAU(0): DPI set to (96, 96)
[ 731.207] (II) Loading sub module "fb"
[ 731.208] (II) LoadModule: "fb"
[ 731.210] (II) Loading /usr/pkg/lib/xorg/modules/libfb.so
[ 731.213] (II) Module fb: vendor="X.Org Foundation"
[ 731.213] compiled for 1.20.0, module version = 1.0.0
[ 731.213] ABI class: X.Org ANSI C Emulation, version 0.4
[ 731.213] (II) Loading sub module "shadowfb"
[ 731.213] (II) LoadModule: "shadowfb"
[ 731.217] (II) Loading /usr/pkg/lib/xorg/modules/libshadowfb.so
[ 731.218] (II) Module shadowfb: vendor="X.Org Foundation"
[ 731.218] compiled for 1.20.0, module version = 1.0.0
[ 731.218] ABI class: X.Org ANSI C Emulation, version 0.4
[ 731.218] (**) NOUVEAU(0): [COPY] acceleration disabled
[ 731.220] (II) NOUVEAU(0): Hardware support for Present enabled
[ 731.220] (==) NOUVEAU(0): Backing store enabled
[ 731.220] (==) NOUVEAU(0): Silken mouse enabled
[ 731.220] (==) NOUVEAU(0): DPMS enabled
[ 731.223] (II) Initializing extension Generic Event Extension
[ 731.223] (II) Initializing extension SHAPE
[ 731.223] (II) Initializing extension MIT-SHM
[ 731.224] (II) Initializing extension XInputExtension
[ 731.224] (II) Initializing extension XTEST
[ 731.226] (II) Initializing extension BIG-REQUESTS
[ 731.226] (II) Initializing extension SYNC
[ 731.226] (II) Initializing extension XKEYBOARD
[ 731.226] (II) Initializing extension XC-MISC
[ 731.226] (II) Initializing extension XFIXES
[ 731.227] (II) Initializing extension RENDER
[ 731.227] (II) Initializing extension RANDR
[ 731.227] (II) Initializing extension COMPOSITE
[ 731.227] (II) Initializing extension DAMAGE
[ 731.227] (II) Initializing extension MIT-SCREEN-SAVER
[ 731.227] (II) Initializing extension DOUBLE-BUFFER
[ 731.227] (II) Initializing extension RECORD
[ 731.227] (II) Initializing extension DPMS
[ 731.227] (II) Initializing extension Present
[ 731.228] (II) Initializing extension DRI3
[ 731.228] (II) Initializing extension X-Resource
[ 731.228] (II) Initializing extension XVideo
[ 731.228] (II) Initializing extension XVideo-MotionCompensation
[ 731.228] (II) Initializing extension GLX
[ 731.228] (II) AIGLX: Screen 0 is not DRI2 capable
[ 731.558] (II) IGLX: Loaded and initialized swrast
[ 731.558] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 731.558] (II) Initializing extension XFree86-VidModeExtension
[ 731.558] (II) Initializing extension XFree86-DGA
[ 731.558] (II) Initializing extension XFree86-DRI
[ 731.558] (II) Initializing extension DRI2
[ 731.626] (II) NOUVEAU(0): NVEnterVT is called.
[ 731.692] (II) NOUVEAU(0): Setting screen physical size to 444 x 277
[ 731.693] resize called 1680 1050
[ 732.201] (II) Using input driver 'mouse' for 'mouse0'
[ 732.201] (**) Option "CorePointer" "on"
[ 732.202] (**) mouse0: always reports core events
[ 732.202] (**) Option "Device" "/dev/wsmouse"
[ 732.202] (==) mouse0: Protocol: "WSMouse"
[ 732.202] (**) mouse0: always reports core events
[ 732.203] (==) mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 732.203] (**) mouse0: ZAxisMapping: buttons 4 and 5
[ 732.203] (**) mouse0: Buttons: 9
[ 732.203] (II) XINPUT: Adding extended input device "mouse0" (type:
MOUSE, id 6)
[ 732.204] (**) mouse0: (accel) keeping acceleration scheme 1
[ 732.204] (**) mouse0: (accel) acceleration profile 0
[ 732.204] (**) mouse0: (accel) acceleration factor: 2.000
[ 732.204] (**) mouse0: (accel) acceleration threshold: 4
[ 732.205] (II) Using input driver 'kbd' for 'keyboard0'
[ 732.205] (**) Option "CoreKeyboard" "on"
[ 732.205] (**) keyboard0: always reports core events
[ 732.205] (**) keyboard0: always reports core events
[ 732.206] (**) Option "Protocol" "standard"
[ 732.206] (**) Option "XkbRules" "base"
[ 732.206] (**) Option "XkbModel" "pc105"
[ 732.206] (**) Option "XkbLayout" "fr"
[ 732.206] (**) Option "XkbVariant" "latin9"
[ 732.206] (II) XINPUT: Adding extended input device "keyboard0"
(type: KEYBOARD, id 7)
[ 789.092] (II) UnloadModule: "kbd"
[ 789.092] (II) UnloadModule: "mouse"
[ 789.110] (II) NOUVEAU(0): NVLeaveVT is called.
[ 789.337] (II) Server terminated successfully (0). Closing log file.
Home |
Main Index |
Thread Index |
Old Index