tech-kern archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
LG CRD-8322B does not work
Hi,
I have LG CRD-8322B CD-ROM drive that is shipped with Sun Ultra 5.
cd0 at atapibus0 drive 0: <CRD-8322B, 1998/09/24, 1.05> cdrom removable
I cannot boot NetBSD/sparc64 6.0.1 and 6.99.24 of 2014-06-19 from nyftp
on Sun Ultra 5.
I have set up netboot environment for Ultra 5, and I can run NetBSD
on Ultra 5.
And I have mounted CD-R of NetBSD/sparc64 6.0.1, and tried to umount
and I have gotten errors.
I have ported LG CRD-8322B CD-ROM drive to i386 machine.
And I have tried to umount CD-R, and I have gotten same error.
How to debug this issue?
P.S.
I have found a report of same problem in 2009.
https://mail-index.netbsd.org/port-sparc64/2009/08/12/msg001002.html
=== === Boot from CD-ROM === ===
Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 360MHz), No Keyboard
OpenBoot 3.19, 128 MB (50 ns) memory installed, Serial #11908981.
Ethernet address 8:0:20:b5:b7:75, Host ID: 80b5b775.
ok boot cdrom
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f File and args:
NetBSD IEEE 1275 Multi-FS Bootblock
Version $NetBSD: bootblk.fth,v 1.13 2010/06/24 00:54:12 eeh Exp $
>> NetBSD/sparc64 OpenFirmware Boot, Revision 1.16
=0x886da0
Loading netbsd: 8051960+552288+340352 [600336+392798]=0x9ccf68
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.0.1 (GENERIC)
total memory = 128 MB
avail memory = 112 MB
mainbus0 (root): SUNW,Ultra-5_10 (Sun Ultra 5/10 UPA/PCI): hostid 80b5b775
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 360 MHz, UPA id 0
cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64 b/l)
psycho0 at mainbus0 addr 0xfffc4000
psycho0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
pci0 at psycho0
ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI Bridge (rev. 0x13)
pci1 at ppb0 bus 1
ebus0 at pci1 dev 1 function 0
ebus0: Sun Microsystems PCIO Ebus2, revision 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003,
72c000-72c003, 72f000-72f003
power at ebus0 addr 724000-724003 ipl 25 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
sab0 at ebus0 addr 400000-40007f ipl 2b: rev 3.2
sabtty0 at sab0 port 0: console i/o
sabtty1 at sab0 port 1
com0 at ebus0 addr 3083f8-3083ff ipl 29: ns16550a, working fifo
kbd0 at com0
com1 at ebus0 addr 3062f8-3062ff ipl 2a: ns16550a, working fifo
ms0 at com1
wsmouse0 at ms0 mux 0
lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ipl 22
fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 27 not
configured
clock0 at ebus0 addr 0-1fff: mk48t59
flashprom at ebus0 addr 0-fffff not configured
audiocs0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f,
722000-722003 ipl 23 ipl 24: CS4231A
audio0 at audiocs0: full duplex, playback, capture
hme0 at pci1 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1
hme0: interrupting at ivec 3021
hme0: Ethernet address 08:00:20:b5:b7:75
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
machfb0 at pci1 dev 2 function 0: ATI Technologies 3D Rage Pro (rev. 0x5c)
machfb0: aperture size 01000000
machfb0: 16 MB aperture at 0xe1000000, 4 KB registers at 0xe2000000
machfb0: 128 KB ROM at 0xe1020000
CLOCK_CNTL: 00210a00
using clock 0
ref_div: 33
mclk_fb_div: 228
machfb0: 4096 KB SGRAM 98.924 MHz, maximum RAMDAC clock 230 MHz
post_div: 2 log2_post_div: 1 mclk_div: 228
vclk_ctl: 03
machfb0: initializing the DSP
machfb0: initial resolution 1152x864 at 8 bpp
machfb0: attached to /dev/fb0
post_div: 2 log2_post_div: 1 mclk_div: 228
vclk_ctl: 03
machfb0: initializing the DSP
wsdisplay1 at machfb0 kbdmux 1
direct rendering for machfb0 unsupported
cmdide0 at pci1 dev 3 function 0: CMD Technology PCI0646 (rev. 0x03)
cmdide0: primary channel configured to native-PCI mode
cmdide0: using ivec 1820 for native-PCI interrupt
atabus0 at cmdide0 channel 0
cmdide0: secondary channel configured to native-PCI mode
atabus1 at cmdide0 channel 1
ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI Bridge (rev. 0x13)
pci2 at ppb1 bus 2
Digital Equipment DC21554 PCI-PCI Bridge (miscellaneous bridge, revision 0x01)
at pci2 dev 3 function 0 not configured
pcons at mainbus0 not configured
No counter-timer -- using %tick at 360MHz as system clock.
wskbd0 at kbd0 mux 1
wd0 at atabus0 drive 0
kbd0: reset failed
wd0: <ST39140A>
wd0: 8693 MB, 17662 cyl, 16 head, 63 sec, 512 bytes/sect x 17803440 sectors
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <CRD-8322B, 1998/09/24, 1.05> cdrom removable
wd0: no disk label
wd0: no disk label
wdc_atapi_intr: bad data phase DATAOUT
cmdide0:1:0: reset failed
cmdide0:1:0: unbusy timed out
cmdide0:1:0: reset failed
cmdide0:1:0: unbusy timed out
cmdide0:1:0: reset failed
cmdide0:1:0: unbusy timed out
=== === umount CD-R === ===
# mount_cd9660 /dev/cd0a /mnt
# umount /mnt
wdc_atapi_intr: bad data phase DATAOUT
cmdide0:1:0: reset failed
cmdide0:1:0: unbusy timed out
(endless loop)
--
Ryo ONODERA // ryo_on%yk.rim.or.jp@localhost
PGP fingerprint = 82A2 DC91 76E0 A10A 8ABB FD1B F404 27FA C7D1 15F3
Home |
Main Index |
Thread Index |
Old Index