tech-kern archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: HP Proliant won't reboot



From: "D'Arcy J.M. Cain" <darcy%NetBSD.org@localhost>
Subject: HP Proliant won't reboot
Date: Tue, 1 Apr 2014 10:03:58 -0400

> I am having a strange error.  I just picked up a HP Proliant G5 and
> installed NetBSD 6.1.3 AMD64 on it.  Everything is fine as far as
> installing and running goes but when I reboot it goes through most of
> the stuff, detaches a bunch of devices and then says "rebooting" and
> stops.  NumLock doesn't change the light and the system won't respond
> to the keyboard or the network.  Luckily it has already unmounted the
> drive so I can safely power cycle but that's going to be extremely
> inconvenient in a lights out situation.

Try to cold boot. if it works,try to update iLO firmware if you can. 
1. plug off power cable from power supply.
2. wait 3 min and pray.
3. plug in power cable and boot.

--
Jun Ebihara


Home | Main Index | Thread Index | Old Index