tech-kern archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

RE: Dell 1850 nics fail



 <20091023163204.GA2033%asim.lip6.fr@localhost>
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
MIME-Version: 1.0


>
> I guess it will work if you disable acpi.


Thanks Manuel.=A0 I was hoping for a more modern solution.




-no-acpi yields:



NetBSD 5.0.1_PATCH (PETER-FW) #0: Tue Oct 13 21:09:11 CDT 2009

=A0=A0=A0=A0=A0=A0=A0 peter@buster:/builds/netbsd-5-0/i386/obj/builds/netbs=
d-5-0/src/sys/arch/i386/compile/PETER-FW

total memory =3D 1023 MB

avail memory =3D 993 MB

timecounter: Timecounters tick every 10.000 msec

timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100

Dell Computer Corporation PowerEdge 1850

mainbus0 (root)

mainbus0: Intel MP Specification (Version 1.4) (DELL=A0=A0=A0=A0 PE 016C=A0=
=A0=A0=A0 )

cpu0 at mainbus0 apid 0: Intel 686-class=2C 2992MHz=2C id 0xf4a

cpu1 at mainbus0 apid 6: Intel 686-class=2C 2992MHz=2C id 0xf4a

mpbios: bus 0 is type PCI=A0=A0=20

mpbios: bus 1 is type PCI=A0=A0=20

mpbios: bus 2 is type PCI=A0=A0=20

mpbios: bus 3 is type PCI=A0=A0=20

mpbios: bus 4 is type PCI=A0=A0=20

mpbios: bus 5 is type PCI=A0=A0=20

mpbios: bus 6 is type PCI=A0=A0=20

mpbios: bus 7 is type PCI=A0=A0=20

mpbios: bus 8 is type PCI=A0=A0=20

mpbios: bus 9 is type PCI=A0=A0=20

mpbios: bus 10 is type ISA=A0=A0=20

ioapic0 at mainbus0 apid 8: pa 0xfec00000=2C version 20=2C 24 pins

ioapic1 at mainbus0 apid 9: pa 0xfec80000=2C version 20=2C 24 pins

ioapic2 at mainbus0 apid 10: pa 0xfec83000=2C version 20=2C 24 pins

ipmi0 at mainbus0

pci0 at mainbus0 bus 0: configuration mode 1

pci0: i/o space=2C memory space enabled=2C rd/line=2C rd/mult=2C wr/inv ok

pchb0 at pci0 dev 0 function 0

pchb0: vendor 0x8086 product 0x3590 (rev. 0x09)

ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x3595 (rev. 0x09)

pci1 at ppb0 bus 1

pci1: i/o space=2C memory space enabled=2C rd/line=2C wr/inv ok

ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x0330 (rev. 0x06)

ppb1: disabling notification events

pci2 at ppb1 bus 2

pci2: i/o space=2C memory space enabled=2C rd/line=2C wr/inv ok

wm0 at pci2 dev 12 function 0: Intel i82546EB 1000BASE-T Ethernet=2C rev. 1

wm0: interrupting at ioapic1 pin 7

wm0: 64-bit 100MHz PCIX bus

wm0: 256 word (8 address bits) MicroWire EEPROM

wm0: Ethernet address 00:04:23:e1:a3:b2

makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY=2C rev. 3

makphy0: 10baseT=2C 10baseT-FDX=2C 100baseTX=2C 100baseTX-FDX=2C 1000baseT=
=2C 1000baseT-FDX=2C auto

wm1 at pci2 dev 12 function 1: Intel i82546EB 1000BASE-T Ethernet=2C rev. 1

wm1: interrupting at ioapic1 pin 4

wm1: 64-bit 100MHz PCIX bus

wm1: 256 word (8 address bits) MicroWire EEPROM

wm1: Ethernet address 00:04:23:e1:a3:b3

makphy1 at wm1 phy 1: Marvell 88E1011 Gigabit PHY=2C rev. 3

makphy1: 10baseT=2C 10baseT-FDX=2C 100baseTX=2C 100baseTX-FDX=2C 1000baseT=
=2C 1000baseT-FDX=2C auto

amr0 at pci2 dev 14 function 0: AMI RAID <PERC 4e/Si>

amr0: interrupting at ioapic1 pin 14

amr0: firmware 5B2D=2C BIOS H435=2C 256MB RAM

ld0 at amr0 unit 0: RAID 1=2C optimal

ld0: 69880 MB=2C 8908 cyl=2C 255 head=2C 63 sec=2C 512 bytes/sect x 1431142=
40 sectors

ppb2 at pci1 dev 0 function 2: vendor 0x8086 product 0x0332 (rev. 0x06)

ppb2: disabling notification events

pci3 at ppb2 bus 3

pci3: i/o space=2C memory space enabled=2C rd/line=2C wr/inv ok

wm2 at pci3 dev 11 function 0: Intel i82546EB 1000BASE-T Ethernet=2C rev. 1

wm2: interrupting at ioapic1 pin 5

wm2: 64-bit 133MHz PCIX bus

wm2: 256 word (8 address bits) MicroWire EEPROM

wm2: Ethernet address 00:04:23:e0:8b:46

makphy2 at wm2 phy 1: Marvell 88E1011 Gigabit PHY=2C rev. 3

makphy2: 10baseT=2C 10baseT-FDX=2C 100baseTX=2C 100baseTX-FDX=2C 1000baseT=
=2C 1000baseT-FDX=2C auto

wm3 at pci3 dev 11 function 1: Intel i82546EB 1000BASE-T Ethernet=2C rev. 1

wm3: interrupting at ioapic1 pin 6

wm3: 64-bit 133MHz PCIX bus

wm3: 256 word (8 address bits) MicroWire EEPROM

wm3: Ethernet address 00:04:23:e0:8b:47

makphy3 at wm3 phy 1: Marvell 88E1011 Gigabit PHY=2C rev. 3

makphy3: 10baseT=2C 10baseT-FDX=2C 100baseTX=2C 100baseTX-FDX=2C 1000baseT=
=2C 1000baseT-FDX=2C auto

ppb3 at pci0 dev 4 function 0: vendor 0x8086 product 0x3597 (rev. 0x09)

pci4 at ppb3 bus 4

pci4: i/o space=2C memory space enabled=2C rd/line=2C wr/inv ok

ppb4 at pci0 dev 5 function 0: vendor 0x8086 product 0x3598 (rev. 0x09)

pci5 at ppb4 bus 5

pci5: i/o space=2C memory space enabled=2C rd/line=2C wr/inv ok

ppb5 at pci5 dev 0 function 0: vendor 0x8086 product 0x0329 (rev. 0x09)

ppb5: disabling notification events

pci6 at ppb5 bus 6

pci6: i/o space=2C memory space enabled=2C rd/line=2C wr/inv ok

wm4 at pci6 dev 7 function 0: Intel i82541GI 1000BASE-T Ethernet=2C rev. 5

wm4: interrupting at ioapic2 pin 0

wm4: 32-bit 66MHz PCI bus

wm4: 65536 word (16 address bits) SPI EEPROM

wm4: Ethernet address 00:14:22:14:74:e0

igphy0 at wm4 phy 1: Intel IGP01E1000 Gigabit PHY=2C rev. 0

igphy0: 10baseT=2C 10baseT-FDX=2C 100baseTX=2C 100baseTX-FDX=2C 1000baseT=
=2C 1000baseT-FDX=2C auto

ppb6 at pci5 dev 0 function 2: vendor 0x8086 product 0x032a (rev. 0x09)

ppb6: disabling notification events

pci7 at ppb6 bus 7

pci7: i/o space=2C memory space enabled=2C rd/line=2C wr/inv ok

wm5 at pci7 dev 8 function 0: Intel i82541GI 1000BASE-T Ethernet=2C rev. 5

wm5: interrupting at ioapic2 pin 1

wm5: 32-bit 66MHz PCI bus

wm5: 65536 word (16 address bits) SPI EEPROM

wm5: Ethernet address 00:14:22:14:74:e1

igphy1 at wm5 phy 1: Intel IGP01E1000 Gigabit PHY=2C rev. 0

igphy1: 10baseT=2C 10baseT-FDX=2C 100baseTX=2C 100baseTX-FDX=2C 1000baseT=
=2C 1000baseT-FDX=2C auto

ppb7 at pci0 dev 6 function 0: vendor 0x8086 product 0x3599 (rev. 0x09)

pci8 at ppb7 bus 8

pci8: i/o space=2C memory space enabled=2C rd/line=2C wr/inv ok

uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x24d2 (rev. 0x02)

uhci0: interrupting at ioapic0 pin 16

usb0 at uhci0: USB revision 1.0

uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x24d4 (rev. 0x02)

uhci1: interrupting at ioapic0 pin 19

usb1 at uhci1: USB revision 1.0

uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x24d7 (rev. 0x02)

uhci2: interrupting at ioapic0 pin 18

usb2 at uhci2: USB revision 1.0

ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x24dd (rev. 0x02)

ehci0: interrupting at ioapic0 pin 23

ehci0: EHCI version 1.0

ehci0: companion controllers=2C 2 ports each: uhci0 uhci1 uhci2

usb3 at ehci0: USB revision 2.0

ppb8 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xc2)

pci9 at ppb8 bus 9

pci9: i/o space=2C memory space enabled

vendor 0x1028 product 0x0011 (undefined subclass 0x00) at pci9 dev 5 functi=
on 0 not configured

vendor 0x1028 product 0x0012 (undefined subclass 0x00) at pci9 dev 5 functi=
on 1 not configured

vendor 0x1028 product 0x0014 (undefined subclass 0x00) at pci9 dev 5 functi=
on 2 not configured

cmdide0 at pci9 dev 6 function 0

cmdide0: Silicon Image 0680 (rev. 0x02)

cmdide0: bus-master DMA support present

cmdide0: primary channel wired to native-PCI mode

cmdide0: using ioapic0 pin 23 for native-PCI interrupt

atabus0 at cmdide0 channel 0

cmdide0: secondary channel wired to native-PCI mode

atabus1 at cmdide0 channel 1

vga1 at pci9 dev 13 function 0: vendor 0x1002 product 0x5159 (rev. 0x00)

wsdisplay0 at vga1 kbdmux 1

wsmux1: connecting to wsdisplay0

drm at vga1 not configured

ichlpcib0 at pci0 dev 31 function 0

ichlpcib0: vendor 0x8086 product 0x24d0 (rev. 0x02)

timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000

ichlpcib0: 24-bit timer

ichlpcib0: TCO (watchdog) timer configured.

piixide0 at pci0 dev 31 function 1

piixide0: Intel 82801EB IDE Controller (ICH5) (rev. 0x02)

piixide0: bus-master DMA support present

piixide0: primary channel configured to compatibility mode

piixide0: primary channel interrupting at ioapic0 pin 14

atabus2 at piixide0 channel 0

piixide0: secondary channel configured to compatibility mode

piixide0: secondary channel interrupting at ioapic0 pin 15

atabus3 at piixide0 channel 1

isa0 at ichlpcib0

com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a=2C working fifo

com0: console

pckbc0 at isa0 port 0x60-0x64

attimer0 at isa0 port 0x40-0x43: AT Timer

pcppi0 at isa0 port 0x61

midi0 at pcppi0: PC speaker (CPU-intensive output)

sysbeep0 at pcppi0

npx0 at isa0 port 0xf0-0xff

npx0: reported by CPUID=3B using exception 16

fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2

attimer0: attached to pcppi0

timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0

timecounter: Timecounter "TSC" frequency 2992791750 Hz quality 3000

fd0 at fdc0 drive 0: 1.44MB=2C 80 cyl=2C 2 head=2C 18 sec

uhub0 at usb0: vendor 0x8086 UHCI root hub=2C class 9/0=2C rev 1.00/1.00=2C=
 addr 1

uhub0: 2 ports with 2 removable=2C self powered

uhub1 at usb1: vendor 0x8086 UHCI root hub=2C class 9/0=2C rev 1.00/1.00=2C=
 addr 1

uhub1: 2 ports with 2 removable=2C self powered

uhub2 at usb2: vendor 0x8086 UHCI root hub=2C class 9/0=2C rev 1.00/1.00=2C=
 addr 1

uhub2: 2 ports with 2 removable=2C self powered

uhub3 at usb3: vendor 0x8086 EHCI root hub=2C class 9/0=2C rev 2.00/1.00=2C=
 addr 1

uhub3: 6 ports with 6 removable=2C self powered

atapibus0 at atabus0: 2 targets

IPsec: Initialized Security Association Processing.

sd0 at atapibus0 drive 0: <VIRTUALFLOPPY DRIVE=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0=A0 Flopp=2C =2C> disk removable

sd0: drive offline

sd0(cmdide0:0:0):=A0 Check Condition on CDB: 0x00 00 00 00 00 00

=A0=A0=A0 SENSE KEY:=A0 Not Ready

=A0=A0=A0=A0 ASC/ASCQ:=A0 Medium Not Present



sd0: unable to open device=2C error =3D 19

sd0: 32-bit data port

sd0: drive supports PIO mode 3

cd0 at atapibus0 drive 1: <VIRTUALCDROM DRIVE=2C =2C> cdrom removable

cd0: 32-bit data port

cd0: drive supports PIO mode 3

sd0(cmdide0:0:0): using PIO mode 3

cd0(cmdide0:0:1): using PIO mode 3

atapibus1 at atabus2: 2 targets

cd1 at atapibus1 drive 0: <HL-DT-ST=A0 GCR-8240N=2C =2C 1.06> cdrom removab=
le

cd1: 32-bit data port

cd1: drive supports PIO mode 4=2C DMA mode 2=2C Ultra-DMA mode 2 (Ultra/33)

cd1(piixide0:0:0): using PIO mode 4=2C Ultra-DMA mode 2 (Ultra/33) (using D=
MA)

uhub4 at uhub3 port 3: vendor 0x413c product 0xa001=2C class 9/0=2C rev 2.0=
0/0.00=2C addr 2

uhub4: multiple transaction translators

uhub4: 2 ports with 2 removable=2C self powered

uhidev0 at uhub0 port 1 configuration 1 interface 0

uhidev0: Dell DRAC4=2C rev 1.10/0.00=2C addr 2=2C iclass 3/1

ukbd0 at uhidev0

wskbd0 at ukbd0 mux 1

wskbd0: connecting to wsdisplay0

uhidev1 at uhub0 port 1 configuration 1 interface 1

uhidev1: Dell DRAC4=2C rev 1.10/0.00=2C addr 2=2C iclass 3/1

ums0 at uhidev1

ums0: X report 0x0002 not supported

ipmi0: version 1.5 interface KCS iobase 0xca8/8 spacing 4

Kernelized RAIDframe activated

pad0: outputs: 44100Hz=2C 16-bit=2C stereo

audio0 at pad0: half duplex

sd0(cmdide0:0:0):=A0 Check Condition on CDB: 0x00 00 00 00 00 00

=A0=A0=A0 SENSE KEY:=A0 Not Ready

=A0=A0=A0=A0 ASC/ASCQ:=A0 Medium Not Present



sd0(cmdide0:0:0):=A0 Check Condition on CDB: 0x00 00 00 00 00 00

=A0=A0=A0 SENSE KEY:=A0 Not Ready

=A0=A0=A0=A0 ASC/ASCQ:=A0 Medium Not Present



sd0(cmdide0:0:0):=A0 Check Condition on CDB: 0x00 00 00 00 00 00

=A0=A0=A0 SENSE KEY:=A0 Not Ready

=A0=A0=A0=A0 ASC/ASCQ:=A0 Medium Not Present



sd0(cmdide0:0:0):=A0 Check Condition on CDB: 0x00 00 00 00 00 00

=A0=A0=A0 SENSE KEY:=A0 Not Ready

=A0=A0=A0=A0 ASC/ASCQ:=A0 Medium Not Present



boot device: ld0

root on ld0a dumps on ld0b

root file system type: ffs

wsdisplay0: screen 1 added (80x25=2C vt100 emulation)

wsdisplay0: screen 2 added (80x25=2C vt100 emulation)

wsdisplay0: screen 3 added (80x25=2C vt100 emulation)

wsdisplay0: screen 4 added (80x25=2C vt100 emulation)


                                         =20
_________________________________________________________________
Windows 7: Simplify your PC. Learn more.
http://www.microsoft.com/Windows/windows-7/default.aspx?ocid=3DPID24727::T:=
WLMTAGL:ON:WL:en-US:WWL_WIN_evergreen1:102009=


Home | Main Index | Thread Index | Old Index