--NextPart-20070702194152-1288300
Content-Type: Text/Plain; charset=us-ascii

> On Mon,  2 Jul 2007 15:08:01 +0900 (JST)
> yamt@mwd.biglobe.ne.jp (YAMAMOTO Takashi) wrote:
> 
> > > Takashi, please use these patches and let me know if you have the
> > > same problem with sme_event_drvadd():
> > 
> > what you've committed is supposed to have the problem?
> 
> No, it shouldn't have any known problem. Anyway, if there's any problem
> I'll fix them, just let me know.
> 
> -- 
> Juan Romero Pardines	- The NetBSD Project
> http://plog.xtrarom.org	- NetBSD/pkgsrc news in Spanish

i've tried today's current with ENVSYS_DEBUG.  see the attached dmesg.

YAMAMOTO Takashi

--NextPart-20070702194152-1288300
Content-Type: Text/Plain; charset=us-ascii
Content-Disposition: attachment; filename="d"

 Controller] at acpi0 not configured
pcppi0 at acpi0 (PNP0800)
pcppi0: io 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
attimer0 at acpi0 (PNP0100): AT Timer
attimer0: io 0x40-0x5f irq 0
fdc0 at acpi0 (PNP0700)
fdc0: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
com0 at acpi0 (PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
com0: console
PNP0C01 [System Board] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0103 [HPET Timer] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
pcppi0: attached to attimer0
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel E7525 Memory Controller Hub (rev. 0x09)
ppb0 at pci0 dev 2 function 0: Intel E7525 PCI Express Port A (rev. 0x09)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci1 dev 0 function 0: Intel product 0x0330 (rev. 0x06)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
amr0 at pci2 dev 14 function 0: AMI RAID <PERC 4e/Di>
amr0: interrupting at ioapic1 pin 14 (irq 7)
amr0: firmware 516A, BIOS H418, 256MB RAM
ld0 at amr0 unit 0: RAID 5, optimal
ld0: 1117 GB, 145880 cyl, 255 head, 63 sec, 512 bytes/sect x 2343567360 sectors
ppb2 at pci1 dev 0 function 2: Intel product 0x0332 (rev. 0x06)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 4 function 0: Intel E7525 PCI Express Port B (rev. 0x09)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 5 function 0: Intel product 0x3598 (rev. 0x09)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci5 dev 0 function 0: Intel 6700PXH PCI Express-to-PCI Bridge #0 (rev. 0x09)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci6 dev 7 function 0: Intel i82541GI 1000BASE-T Ethernet, rev. 5
wm0: interrupting at ioapic2 pin 0 (irq 11)
wm0: 32-bit 66MHz PCI bus
wm0: 65536 word (16 address bits) SPI EEPROM
wm0: Ethernet address 00:11:43:e4:37:2e
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb6 at pci5 dev 0 function 2: Intel 6700PXH PCI Express-to-PCI Bridge #1 (rev. 0x09)
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
wm1 at pci7 dev 8 function 0: Intel i82541GI 1000BASE-T Ethernet, rev. 5
wm1: interrupting at ioapic2 pin 1 (irq 3)
wm1: 32-bit 66MHz PCI bus
wm1: 65536 word (16 address bits) SPI EEPROM
wm1: Ethernet address 00:11:43:e4:37:2f
igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb7 at pci0 dev 6 function 0: Intel product 0x3599 (rev. 0x09)
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
wm2 at pci8 dev 0 function 0: Intel i82572EI 1000baseT Ethernet, rev. 6
wm2: interrupting at ioapic0 pin 16 (irq 11)
wm2: PCI-Express bus
wm2: 65536 word (16 address bits) SPI EEPROM
wm2: Ethernet address 00:15:17:0b:eb:ef
igphy2 at wm2 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: Intel 82801EB/ER USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801EB/ER USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801EB/ER USB UHCI Controller (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18 (irq 7)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801EB/ER USB EHCI Controller (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23 (irq 5)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb8 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xc2)
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled
vga0 at pci9 dev 13 function 0: ATI Technologies Radeon 7000/VE QY (rev. 0x00)
wsdisplay0 at vga0
direct rendering for vga0 unsupported
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801EB LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801EB IDE Controller (ICH5) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at piixide0 channel 1
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
raidattach: Asked for 8 units
Kernelized RAIDframe activated
sme_event_register: dev=ipmi0 sensor=Temp snum=0 type=110 critval=0
sme_events_init: events framework initialized
sme_event_register: dev=ipmi0 sensor=Temp snum=0 type=130 critval=0
sme_event_drvadd: failed to add event (critover)
sme_event_drvadd: failed to add event (warnover)
sme_event_register: dev=ipmi0 sensor=Riser Temp snum=2 type=110 critval=0
sme_event_register: dev=ipmi0 sensor=Riser Temp snum=2 type=130 critval=0
sme_event_register: dev=ipmi0 sensor=Planar Temp snum=3 type=110 critval=0
sme_event_register: dev=ipmi0 sensor=Planar Temp snum=3 type=130 critval=0
sme_event_register: dev=ipmi0 sensor=Ambient Temp snum=4 type=110 critval=0
sme_event_register: dev=ipmi0 sensor=Ambient Temp snum=4 type=130 critval=0
sme_event_drvadd: failed to add event (critover)
sme_event_drvadd: failed to add event (warnover)
sme_event_drvadd: failed to add event (critover)
sme_event_drvadd: failed to add event (warnover)
sme_event_drvadd: failed to add event (critover)
sme_event_drvadd: failed to add event (warnover)
sme_event_drvadd: failed to add event (critover)
sme_event_drvadd: failed to add event (warnover)
sme_event_drvadd: failed to add event (critover)
sme_event_drvadd: failed to add event (warnover)
sme_event_drvadd: failed to add event (critover)
sme_event_drvadd: failed to add event (warnover)
sme_event_drvadd: failed to add event (critover)
sme_event_drvadd: failed to add event (warnover)
sme_event_drvadd: failed to add event (critover)
sme_event_drvadd: failed to add event (warnover)
sme_event_drvadd: failed to add event (critover)
sme_event_drvadd: failed to add event (warnover)
sme_event_register: dev=ipmi0 sensor=FAN 8 RPM snum=14 type=110 critval=0
sme_event_register: dev=ipmi0 sensor=FAN 8 RPM snum=14 type=130 critval=0
sme_event_register: dev=ipmi0 sensor=FAN 7 RPM snum=15 type=110 critval=0
sme_event_register: dev=ipmi0 sensor=FAN 7 RPM snum=15 type=130 critval=0
sme_event_register: dev=ipmi0 sensor=FAN 6 RPM snum=16 type=110 critval=0
sme_event_register: dev=ipmi0 sensor=FAN 6 RPM snum=16 type=130 critval=0
sme_event_register: dev=ipmi0 sensor=FAN 5 RPM snum=17 type=110 critval=0
sme_event_register: dev=ipmi0 sensor=FAN 5 RPM snum=17 type=130 critval=0
sme_event_register: dev=ipmi0 sensor=FAN 4 RPM snum=18 type=110 critval=0
sme_event_register: dev=ipmi0 sensor=FAN 4 RPM snum=18 type=130 critval=0
sme_event_register: dev=ipmi0 sensor=FAN 3 RPM snum=19 type=110 critval=0
sme_event_register: dev=ipmi0 sensor=FAN 3 RPM snum=19 type=130 critval=0
sme_event_register: dev=ipmi0 sensor=FAN 2 RPM snum=20 type=110 critval=0
sme_event_register: dev=ipmi0 sensor=FAN 2 RPM snum=20 type=130 critval=0
sme_event_register: dev=ipmi0 sensor=FAN 1 RPM snum=21 type=110 critval=0
sme_event_register: dev=ipmi0 sensor=FAN 1 RPM snum=21 type=130 critval=0
sme_event_drvadd: failed to add event (critover)
sme_event_drvadd: failed to add event (warnover)
sme_event_drvadd: failed to add event (critover)
sme_event_drvadd: failed to add event (warnover)
sme_event_drvadd: failed to add event (critover)
sme_event_drvadd: failed to add event (warnover)
sme_event_drvadd: failed to add event (critover)
sme_event_drvadd: failed to add event (warnover)
sme_event_drvadd: failed to add event (critover)
sme_event_drvadd: failed to add event (warnover)
sme_event_drvadd: failed to add event (critover)
sme_event_drvadd: failed to add event (warnover)
sme_event_register: dev=ipmi0 sensor=CMOS Battery snum=28 type=110 critval=0
sme_event_register: dev=ipmi0 sensor=CMOS Battery snum=28 type=130 critval=0
sme_event_drvadd: failed to add event (critover)
sme_event_drvadd: failed to add event (warnover)
sme_event_register: dev=ipmi0 sensor=Intrusion snum=30 type=110 critval=0
sme_event_register: dev=ipmi0 sensor=Intrusion snum=30 type=130 critval=0
sme_event_register: dev=ipmi0 sensor=Status  snum=31 type=110 critval=0
sme_event_register: dev=ipmi0 sensor=Status  snum=31 type=130 critval=0
sme_event_drvadd: failed to add event (critover)
sme_event_drvadd: failed to add event (warnover)
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD-ROM GCC-4243N, , A102> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhub4 at uhub3 port 3
uhub4: Dell product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 2 ports with 2 removable, self powered
Searching for RAID components...
boot device: wm0
root on wm0
mountroot: trying lfs...
mountroot: trying ffs...
mountroot: trying ext2fs...
mountroot: trying nfs...
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 172.17.80.51
nfs_boot: my_domain=local.valinux.co.jp lan
nfs_boot: my_addr=172.17.80.56
nfs_boot: my_mask=255.255.0.0
nfs_boot: gateway=172.17.0.254
sme_events_check: dev=ipmi0 sensor=Status  type=130
sme_events_check: dev=ipmi0 sensor=Status  type=110
sme_events_check: dev=ipmi0 sensor=Intrusion type=130
sme_events_check: dev=ipmi0 sensor=Intrusion type=110
sme_events_check: dev=ipmi0 sensor=CMOS Battery type=130
sme_events_check: dev=ipmi0 sensor=CMOS Battery type=110
sme_events_check: dev=ipmi0 sensor=FAN 1 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 1 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 2 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 2 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 3 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 3 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 4 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 4 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 5 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 5 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 6 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 6 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 7 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 7 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 8 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 8 RPM type=110
sme_events_check: dev=ipmi0 sensor=Ambient Temp type=130
sme_events_check: dev=ipmi0 sensor=Ambient Temp type=110
sme_events_check: dev=ipmi0 sensor=Planar Temp type=130
sme_events_check: dev=ipmi0 sensor=Planar Temp type=110
sme_events_check: dev=ipmi0 sensor=Riser Temp type=130
sme_events_check: dev=ipmi0 sensor=Riser Temp type=110
sme_events_check: dev=ipmi0 sensor=Temp type=130
sme_events_check: dev=ipmi0 sensor=Temp type=110
sme_events_worker: desc=Status  sensor=31 units=9 value_cur=0
sme_events_worker: desc=Status  sensor=31 units=9 value_cur=0
sme_events_worker: desc=Intrusion sensor=30 units=9 value_cur=0
sme_events_worker: desc=Intrusion sensor=30 units=9 value_cur=0
sme_events_worker: desc=CMOS Battery sensor=28 units=3 value_cur=0
sme_events_worker: desc=CMOS Battery sensor=28 units=3 value_cur=0
sme_events_worker: desc=FAN 1 RPM sensor=21 units=1 value_cur=0
sme_events_worker: desc=FAN 1 RPM sensor=21 units=1 value_cur=0
sme_events_worker: desc=FAN 2 RPM sensor=20 units=1 value_cur=0
sme_events_worker: desc=FAN 2 RPM sensor=20 units=1 value_cur=0
sme_events_worker: desc=FAN 3 RPM sensor=19 units=1 value_cur=0
sme_events_worker: desc=FAN 3 RPM sensor=19 units=1 value_cur=0
sme_events_worker: desc=FAN 4 RPM sensor=18 units=1 value_cur=0
sme_events_worker: desc=FAN 4 RPM sensor=18 units=1 value_cur=0
sme_events_worker: desc=FAN 5 RPM sensor=17 units=1 value_cur=0
sme_events_worker: desc=FAN 5 RPM sensor=17 units=1 value_cur=0
sme_events_worker: desc=FAN 6 RPM sensor=16 units=1 value_cur=0
sme_events_worker: desc=FAN 6 RPM sensor=16 units=1 value_cur=0
sme_events_worker: desc=FAN 7 RPM sensor=15 units=1 value_cur=0
sme_events_worker: desc=FAN 7 RPM sensor=15 units=1 value_cur=0
sme_events_worker: desc=FAN 8 RPM sensor=14 units=1 value_cur=0
sme_events_worker: desc=FAN 8 RPM sensor=14 units=1 value_cur=0
sme_events_worker: desc=Ambient Temp sensor=4 units=0 value_cur=0
sme_events_worker: desc=Ambient Temp sensor=4 units=0 value_cur=0
sme_events_worker: desc=Planar Temp sensor=3 units=0 value_cur=0
sme_events_worker: desc=Planar Temp sensor=3 units=0 value_cur=0
sme_events_worker: desc=Riser Temp sensor=2 units=0 value_cur=0
sme_events_worker: desc=Riser Temp sensor=2 units=0 value_cur=0
sme_events_worker: desc=Temp sensor=0 units=0 value_cur=0
sme_events_worker: desc=Temp sensor=0 units=0 value_cur=0
root on 172.17.80.51:/nfsroot
root time: 0x4688a43d
root file system type: nfs
init: copying out path `/sbin/init' 11
nfs server 172.17.80.51:/nfsroot: not responding
nfs server 172.17.80.51:/nfsroot: is alive again
sme_events_check: dev=ipmi0 sensor=Status  type=130
sme_events_check: dev=ipmi0 sensor=Status  type=110
sme_events_check: dev=ipmi0 sensor=Intrusion type=130
sme_events_check: dev=ipmi0 sensor=Intrusion type=110
sme_events_check: dev=ipmi0 sensor=CMOS Battery type=130
sme_events_check: dev=ipmi0 sensor=CMOS Battery type=110
sme_events_check: dev=ipmi0 sensor=FAN 1 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 1 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 2 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 2 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 3 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 3 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 4 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 4 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 5 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 5 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 6 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 6 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 7 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 7 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 8 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 8 RPM type=110
sme_events_check: dev=ipmi0 sensor=Ambient Temp type=130
sme_events_check: dev=ipmi0 sensor=Ambient Temp type=110
sme_events_check: dev=ipmi0 sensor=Planar Temp type=130
sme_events_check: dev=ipmi0 sensor=Planar Temp type=110
sme_events_check: dev=ipmi0 sensor=Riser Temp type=130
sme_events_check: dev=ipmi0 sensor=Riser Temp type=110
sme_events_check: dev=ipmi0 sensor=Temp type=130
sme_events_check: dev=ipmi0 sensor=Temp type=110
sme_events_worker: desc=Status  sensor=31 units=9 value_cur=0
sme_events_worker: desc=Status  sensor=31 units=9 value_cur=0
sme_events_worker: desc=Intrusion sensor=30 units=9 value_cur=0
sme_events_worker: desc=Intrusion sensor=30 units=9 value_cur=0
sme_events_worker: desc=CMOS Battery sensor=28 units=3 value_cur=0
sme_events_worker: desc=CMOS Battery sensor=28 units=3 value_cur=0
sme_events_worker: desc=FAN 1 RPM sensor=21 units=1 value_cur=0
sme_events_worker: desc=FAN 1 RPM sensor=21 units=1 value_cur=0
sme_events_worker: desc=FAN 2 RPM sensor=20 units=1 value_cur=0
sme_events_worker: desc=FAN 2 RPM sensor=20 units=1 value_cur=0
sme_events_worker: desc=FAN 3 RPM sensor=19 units=1 value_cur=0
sme_events_worker: desc=FAN 3 RPM sensor=19 units=1 value_cur=0
sme_events_worker: desc=FAN 4 RPM sensor=18 units=1 value_cur=0
sme_events_worker: desc=FAN 4 RPM sensor=18 units=1 value_cur=0
sme_events_worker: desc=FAN 5 RPM sensor=17 units=1 value_cur=0
sme_events_worker: desc=FAN 5 RPM sensor=17 units=1 value_cur=0
sme_events_worker: desc=FAN 6 RPM sensor=16 units=1 value_cur=0
sme_events_worker: desc=FAN 6 RPM sensor=16 units=1 value_cur=0
sme_events_worker: desc=FAN 7 RPM sensor=15 units=1 value_cur=1800
sme_events_worker: desc=FAN 7 RPM sensor=15 units=1 value_cur=1800
sme_events_worker: desc=FAN 8 RPM sensor=14 units=1 value_cur=1800
sme_events_worker: desc=FAN 8 RPM sensor=14 units=1 value_cur=1800
sme_events_worker: desc=Ambient Temp sensor=4 units=0 value_cur=0
sme_events_worker: desc=Ambient Temp sensor=4 units=0 value_cur=0
sme_events_worker: desc=Planar Temp sensor=3 units=0 value_cur=0
sme_events_worker: desc=Planar Temp sensor=3 units=0 value_cur=0
sme_events_worker: desc=Riser Temp sensor=2 units=0 value_cur=0
sme_events_worker: desc=Riser Temp sensor=2 units=0 value_cur=0
sme_events_worker: desc=Temp sensor=0 units=0 value_cur=0
sme_events_worker: desc=Temp sensor=0 units=0 value_cur=0
sme_events_check: dev=ipmi0 sensor=Status  type=130
sme_events_check: dev=ipmi0 sensor=Status  type=110
sme_events_check: dev=ipmi0 sensor=Intrusion type=130
sme_events_check: dev=ipmi0 sensor=Intrusion type=110
sme_events_check: dev=ipmi0 sensor=CMOS Battery type=130
sme_events_check: dev=ipmi0 sensor=CMOS Battery type=110
sme_events_check: dev=ipmi0 sensor=FAN 1 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 1 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 2 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 2 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 3 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 3 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 4 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 4 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 5 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 5 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 6 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 6 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 7 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 7 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 8 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 8 RPM type=110
sme_events_check: dev=ipmi0 sensor=Ambient Temp type=130
sme_events_check: dev=ipmi0 sensor=Ambient Temp type=110
sme_events_check: dev=ipmi0 sensor=Planar Temp type=130
sme_events_check: dev=ipmi0 sensor=Planar Temp type=110
sme_events_check: dev=ipmi0 sensor=Riser Temp type=130
sme_events_check: dev=ipmi0 sensor=Riser Temp type=110
sme_events_check: dev=ipmi0 sensor=Temp type=130
sme_events_check: dev=ipmi0 sensor=Temp type=110
sme_events_worker: desc=Status  sensor=31 units=9 value_cur=0
sme_events_worker: desc=Status  sensor=31 units=9 value_cur=0
sme_events_worker: desc=Intrusion sensor=30 units=9 value_cur=0
sme_events_worker: desc=Intrusion sensor=30 units=9 value_cur=0
sme_events_worker: desc=CMOS Battery sensor=28 units=3 value_cur=0
sme_events_worker: desc=CMOS Battery sensor=28 units=3 value_cur=0
sme_events_worker: desc=FAN 1 RPM sensor=21 units=1 value_cur=0
sme_events_worker: desc=FAN 1 RPM sensor=21 units=1 value_cur=0
sme_events_worker: desc=FAN 2 RPM sensor=20 units=1 value_cur=0
sme_events_worker: desc=FAN 2 RPM sensor=20 units=1 value_cur=0
sme_events_worker: desc=FAN 3 RPM sensor=19 units=1 value_cur=0
sme_events_worker: desc=FAN 3 RPM sensor=19 units=1 value_cur=0
sme_events_worker: desc=FAN 4 RPM sensor=18 units=1 value_cur=0
sme_events_worker: desc=FAN 4 RPM sensor=18 units=1 value_cur=0
sme_events_worker: desc=FAN 5 RPM sensor=17 units=1 value_cur=1800
sme_events_worker: desc=FAN 5 RPM sensor=17 units=1 value_cur=1800
sme_events_worker: desc=FAN 6 RPM sensor=16 units=1 value_cur=1800
sme_events_worker: desc=FAN 6 RPM sensor=16 units=1 value_cur=1800
sme_events_worker: desc=FAN 7 RPM sensor=15 units=1 value_cur=1800
sme_events_worker: desc=FAN 7 RPM sensor=15 units=1 value_cur=1800
sme_events_worker: desc=FAN 8 RPM sensor=14 units=1 value_cur=1800
sme_events_worker: desc=FAN 8 RPM sensor=14 units=1 value_cur=1800
sme_events_worker: desc=Ambient Temp sensor=4 units=0 value_cur=0
sme_events_worker: desc=Ambient Temp sensor=4 units=0 value_cur=0
sme_events_worker: desc=Planar Temp sensor=3 units=0 value_cur=0
sme_events_worker: desc=Planar Temp sensor=3 units=0 value_cur=0
sme_events_worker: desc=Riser Temp sensor=2 units=0 value_cur=0
sme_events_worker: desc=Riser Temp sensor=2 units=0 value_cur=0
sme_events_worker: desc=Temp sensor=0 units=0 value_cur=0
sme_events_worker: desc=Temp sensor=0 units=0 value_cur=0
sme_events_check: dev=ipmi0 sensor=Status  type=130
sme_events_check: dev=ipmi0 sensor=Status  type=110
sme_events_check: dev=ipmi0 sensor=Intrusion type=130
sme_events_check: dev=ipmi0 sensor=Intrusion type=110
sme_events_check: dev=ipmi0 sensor=CMOS Battery type=130
sme_events_check: dev=ipmi0 sensor=CMOS Battery type=110
sme_events_check: dev=ipmi0 sensor=FAN 1 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 1 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 2 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 2 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 3 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 3 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 4 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 4 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 5 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 5 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 6 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 6 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 7 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 7 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 8 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 8 RPM type=110
sme_events_check: dev=ipmi0 sensor=Ambient Temp type=130
sme_events_check: dev=ipmi0 sensor=Ambient Temp type=110
sme_events_check: dev=ipmi0 sensor=Planar Temp type=130
sme_events_check: dev=ipmi0 sensor=Planar Temp type=110
sme_events_check: dev=ipmi0 sensor=Riser Temp type=130
sme_events_check: dev=ipmi0 sensor=Riser Temp type=110
sme_events_check: dev=ipmi0 sensor=Temp type=130
sme_events_check: dev=ipmi0 sensor=Temp type=110
sme_events_worker: desc=Status  sensor=31 units=9 value_cur=0
sme_events_worker: desc=Status  sensor=31 units=9 value_cur=0
sme_events_worker: desc=Intrusion sensor=30 units=9 value_cur=0
sme_events_worker: desc=Intrusion sensor=30 units=9 value_cur=0
sme_events_worker: desc=CMOS Battery sensor=28 units=3 value_cur=0
sme_events_worker: desc=CMOS Battery sensor=28 units=3 value_cur=0
sme_events_worker: desc=FAN 1 RPM sensor=21 units=1 value_cur=0
sme_events_worker: desc=FAN 1 RPM sensor=21 units=1 value_cur=0
sme_events_worker: desc=FAN 2 RPM sensor=20 units=1 value_cur=0
sme_events_worker: desc=FAN 2 RPM sensor=20 units=1 value_cur=0
sme_events_worker: desc=FAN 3 RPM sensor=19 units=1 value_cur=1800
sme_events_worker: desc=FAN 3 RPM sensor=19 units=1 value_cur=1800
ipmi0: critical over limit on 'FAN 3 RPM'
sme_events_worker: desc=FAN 4 RPM sensor=18 units=1 value_cur=1800
sme_events_worker: desc=FAN 4 RPM sensor=18 units=1 value_cur=1800
ipmi0: critical over limit on 'FAN 4 RPM'
sme_events_worker: desc=FAN 5 RPM sensor=17 units=1 value_cur=1800
sme_events_worker: desc=FAN 5 RPM sensor=17 units=1 value_cur=1800
sme_events_worker: desc=FAN 6 RPM sensor=16 units=1 value_cur=1800
sme_events_worker: desc=FAN 6 RPM sensor=16 units=1 value_cur=1800
sme_events_worker: desc=FAN 7 RPM sensor=15 units=1 value_cur=1800
sme_events_worker: desc=FAN 7 RPM sensor=15 units=1 value_cur=1800
sme_events_worker: desc=FAN 8 RPM sensor=14 units=1 value_cur=1800
sme_events_worker: desc=FAN 8 RPM sensor=14 units=1 value_cur=1800
sme_events_worker: desc=Ambient Temp sensor=4 units=0 value_cur=0
sme_events_worker: desc=Ambient Temp sensor=4 units=0 value_cur=0
sme_events_worker: desc=Planar Temp sensor=3 units=0 value_cur=0
sme_events_worker: desc=Planar Temp sensor=3 units=0 value_cur=0
sme_events_worker: desc=Riser Temp sensor=2 units=0 value_cur=0
sme_events_worker: desc=Riser Temp sensor=2 units=0 value_cur=0
sme_events_worker: desc=Temp sensor=0 units=0 value_cur=0
sme_events_worker: desc=Temp sensor=0 units=0 value_cur=0
sme_events_check: dev=ipmi0 sensor=Status  type=130
sme_events_check: dev=ipmi0 sensor=Status  type=110
sme_events_check: dev=ipmi0 sensor=Intrusion type=130
sme_events_check: dev=ipmi0 sensor=Intrusion type=110
sme_events_check: dev=ipmi0 sensor=CMOS Battery type=130
sme_events_check: dev=ipmi0 sensor=CMOS Battery type=110
sme_events_check: dev=ipmi0 sensor=FAN 1 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 1 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 2 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 2 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 3 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 3 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 4 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 4 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 5 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 5 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 6 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 6 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 7 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 7 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 8 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 8 RPM type=110
sme_events_check: dev=ipmi0 sensor=Ambient Temp type=130
sme_events_check: dev=ipmi0 sensor=Ambient Temp type=110
sme_events_check: dev=ipmi0 sensor=Planar Temp type=130
sme_events_check: dev=ipmi0 sensor=Planar Temp type=110
sme_events_check: dev=ipmi0 sensor=Riser Temp type=130
sme_events_check: dev=ipmi0 sensor=Riser Temp type=110
sme_events_check: dev=ipmi0 sensor=Temp type=130
sme_events_check: dev=ipmi0 sensor=Temp type=110
sme_events_worker: desc=Status  sensor=31 units=9 value_cur=0
sme_events_worker: desc=Status  sensor=31 units=9 value_cur=0
sme_events_worker: desc=Intrusion sensor=30 units=9 value_cur=0
sme_events_worker: desc=Intrusion sensor=30 units=9 value_cur=0
sme_events_worker: desc=CMOS Battery sensor=28 units=3 value_cur=0
sme_events_worker: desc=CMOS Battery sensor=28 units=3 value_cur=0
sme_events_worker: desc=FAN 1 RPM sensor=21 units=1 value_cur=1800
sme_events_worker: desc=FAN 1 RPM sensor=21 units=1 value_cur=1800
ipmi0: critical over limit on 'FAN 1 RPM'
sme_events_worker: desc=FAN 2 RPM sensor=20 units=1 value_cur=1800
sme_events_worker: desc=FAN 2 RPM sensor=20 units=1 value_cur=1800
ipmi0: critical over limit on 'FAN 2 RPM'
sme_events_worker: desc=FAN 3 RPM sensor=19 units=1 value_cur=1800
sme_events_worker: desc=FAN 3 RPM sensor=19 units=1 value_cur=1800
sme_events_worker: desc=FAN 4 RPM sensor=18 units=1 value_cur=1800
sme_events_worker: desc=FAN 4 RPM sensor=18 units=1 value_cur=1800
sme_events_worker: desc=FAN 5 RPM sensor=17 units=1 value_cur=1800
sme_events_worker: desc=FAN 5 RPM sensor=17 units=1 value_cur=1800
sme_events_worker: desc=FAN 6 RPM sensor=16 units=1 value_cur=1800
sme_events_worker: desc=FAN 6 RPM sensor=16 units=1 value_cur=1800
sme_events_worker: desc=FAN 7 RPM sensor=15 units=1 value_cur=1800
sme_events_worker: desc=FAN 7 RPM sensor=15 units=1 value_cur=1800
sme_events_worker: desc=FAN 8 RPM sensor=14 units=1 value_cur=1800
sme_events_worker: desc=FAN 8 RPM sensor=14 units=1 value_cur=1800
sme_events_worker: desc=Ambient Temp sensor=4 units=0 value_cur=0
sme_events_worker: desc=Ambient Temp sensor=4 units=0 value_cur=0
sme_events_worker: desc=Planar Temp sensor=3 units=0 value_cur=0
sme_events_worker: desc=Planar Temp sensor=3 units=0 value_cur=0
sme_events_worker: desc=Riser Temp sensor=2 units=0 value_cur=0
sme_events_worker: desc=Riser Temp sensor=2 units=0 value_cur=0
sme_events_worker: desc=Temp sensor=0 units=0 value_cur=0
sme_events_worker: desc=Temp sensor=0 units=0 value_cur=0
sme_events_check: dev=ipmi0 sensor=Status  type=130
sme_events_check: dev=ipmi0 sensor=Status  type=110
sme_events_check: dev=ipmi0 sensor=Intrusion type=130
sme_events_check: dev=ipmi0 sensor=Intrusion type=110
sme_events_check: dev=ipmi0 sensor=CMOS Battery type=130
sme_events_check: dev=ipmi0 sensor=CMOS Battery type=110
sme_events_check: dev=ipmi0 sensor=FAN 1 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 1 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 2 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 2 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 3 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 3 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 4 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 4 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 5 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 5 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 6 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 6 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 7 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 7 RPM type=110
sme_events_check: dev=ipmi0 sensor=FAN 8 RPM type=130
sme_events_check: dev=ipmi0 sensor=FAN 8 RPM type=110
sme_events_check: dev=ipmi0 sensor=Ambient Temp type=130
sme_events_check: dev=ipmi0 sensor=Ambient Temp type=110
sme_events_check: dev=ipmi0 sensor=Planar Temp type=130
sme_events_check: dev=ipmi0 sensor=Planar Temp type=110
sme_events_check: dev=ipmi0 sensor=Riser Temp type=130
sme_events_check: dev=ipmi0 sensor=Riser Temp type=110
sme_events_check: dev=ipmi0 sensor=Temp type=130
sme_events_check: dev=ipmi0 sensor=Temp type=110
sme_events_worker: desc=Status  sensor=31 units=9 value_cur=0
sme_events_worker: desc=Status  sensor=31 units=9 value_cur=0
sme_events_worker: desc=Intrusion sensor=30 units=9 value_cur=0
sme_events_worker: desc=Intrusion sensor=30 units=9 value_cur=0
sme_events_worker: desc=CMOS Battery sensor=28 units=3 value_cur=0
sme_events_worker: desc=CMOS Battery sensor=28 units=3 value_cur=0
sme_events_worker: desc=FAN 1 RPM sensor=21 units=1 value_cur=1800
sme_events_worker: desc=FAN 1 RPM sensor=21 units=1 value_cur=1800
sme_events_worker: desc=FAN 2 RPM sensor=20 units=1 value_cur=1800
sme_events_worker: desc=FAN 2 RPM sensor=20 units=1 value_cur=1800
sme_events_worker: desc=FAN 3 RPM sensor=19 units=1 value_cur=1800
sme_events_worker: desc=FAN 3 RPM sensor=19 units=1 value_cur=1800
sme_events_worker: desc=FAN 4 RPM sensor=18 units=1 value_cur=1800
sme_events_worker: desc=FAN 4 RPM sensor=18 units=1 value_cur=1800
sme_events_worker: desc=FAN 5 RPM sensor=17 units=1 value_cur=1800
sme_events_worker: desc=FAN 5 RPM sensor=17 units=1 value_cur=1800
sme_events_worker: desc=FAN 6 RPM sensor=16 units=1 value_cur=1800
sme_events_worker: desc=FAN 6 RPM sensor=16 units=1 value_cur=1800
sme_events_worker: desc=FAN 7 RPM sensor=15 units=1 value_cur=1800
sme_events_worker: desc=FAN 7 RPM sensor=15 units=1 value_cur=1800
sme_events_worker: desc=FAN 8 RPM sensor=14 units=1 value_cur=1800
sme_events_worker: desc=FAN 8 RPM sensor=14 units=1 value_cur=1800
sme_events_worker: desc=Ambient Temp sensor=4 units=0 value_cur=0
sme_events_worker: desc=Ambient Temp sensor=4 units=0 value_cur=0
sme_events_worker: desc=Planar Temp sensor=3 units=0 value_cur=0
sme_events_worker: desc=Planar Temp sensor=3 units=0 value_cur=0
sme_events_worker: desc=Riser Temp sensor=2 units=0 value_cur=0
sme_events_worker: desc=Riser Temp sensor=2 units=0 value_cur=0
sme_events_worker: desc=Temp sensor=0 units=0 value_cur=0
sme_events_worker: desc=Temp sensor=0 units=0 value_cur=0

--NextPart-20070702194152-1288300--