--7iMSBzlTiPOCCT2k
Content-Type: multipart/mixed; boundary="FCuugMFkClbJLl1L"
Content-Disposition: inline


--FCuugMFkClbJLl1L
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: inline

Hi,

>Hello,
>I ported the current drm part of the nouveau project
>(">http://nouveau.freedesktop.org/) to NetBSD.
>
>Nouveau is a free project which aims at producing an open-source 3D
>acceleration support for nvidia cards.
>For the moment the material 3D rendering is only working with NV40
>chipset (GeForce 6x00 and 7x00). Can someone try nouveau on NetBSD
>with a NV40 chips ? Thanks.
>

I patched my 3.99.18 sources, build a kernel with "nouveau* at vga?" then
rebooted and the nvidia card is not recognised ; it is a "nVidia Quadro
NVS 110M / GeForce Go 7300(rev a1)" (according to Linux 2.6.20).

In dmesg, it appears as "NVIDIA product 0x01d1 (rev. 0xa1)" so maybe
I'll need some more things than just the patches you provided ?

Any idea ?

TIA,
	Jo


--FCuugMFkClbJLl1L
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: attachment; filename=dmesg

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.18 (D620-$Revision: 1.824 $) #1: Tue May  1 21:40:35 CEST 2007
	ptijo@atheria.tumfatig.net:/home/cvs/src-HEAD/sys/arch/i386/compile/D620
total memory = 1022 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 991 MB
sysctl_createv: sysctl_create(machine) returned 17
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xffa10
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: Intel Pentium M (Yonah) (686-class), 1664.53 MHz, id 0x6e8
cpu0: features bfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features bfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 c189<SSE3,MONITOR,EST,TM2,xTPR>
cpu0: "Genuine Intel(R) CPU           T2300  @ 1.66GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep (1404 mV) 1667 MHz
cpu0: unknown Enhanced SpeedStep CPU.
cpu0: using only highest and lowest power states.
cpu0: Enhanced SpeedStep frequencies available (MHz): 1667 1000
cpu0: Intel(R) On Demand Clock Modulation (state disabled)
cpu0: 64 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: not started
ioapic at mainbus0 apid 2 not configured
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <DELL  , M07    ,27d60c0b>, AslId <ASL ,00000061>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
mpacpi: could not get bus number, assuming bus 0
LNKB: ACPI: Found matching pin for 0.31.INTB at func 2: 3
LNKB: BIOS IRQ 3 for 0.31.INTB is invalid
LNKE: ACPI: Found matching pin for 0.29.INTA at func 0: 10
LNKF: ACPI: Found matching pin for 0.29.INTB at func 1: 11
LNKG: ACPI: Found matching pin for 0.29.INTC at func 2: 9
LNKH: ACPI: Found matching pin for 0.29.INTD at func 3: 5
LNKA: ACPI: Found matching pin for 0.28.INTA at func 0: 0
LNKB: ACPI: Found matching pin for 0.28.INTB at func 1: 0
LNKC: ACPI: Found matching pin for 0.28.INTC at func 2: 0
LNKF: ACPI: Found matching pin for 0.27.INTA at func 0: 11
LNKA: ACPI: Found matching pin for 0.1.INTA at func 0: 0
LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 9
LNKC: ACPI: Found matching pin for 3.1.INTA at func 0: 255
LNKB: ACPI: Found matching pin for 12.0.INTA at func 0: 3
LNKB: BIOS IRQ 3 for 12.0.INTA is invalid
LNKC: ACPI: Found matching pin for 9.0.INTA at func 0: 5
LNKC: BIOS IRQ 5 for 9.0.INTA is invalid
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
pnp0c14 at acpi0 not configured
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
acpibat1 at acpi0 (PNP0C0A-2): ACPI Battery (Control Method)
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0C01 [System Board] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
pckbc1 at acpi0 (PNP0F13): aux port
pckbc1: irq 12
pckbc2 at acpi0 (PNP0303): kbd port
pckbc2: io 0x60,0x64,0x62,0x66 irq 1
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53 irq 2
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61,0x63,0x65,0x67
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
PNP0C01 [System Board] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
hpet0 at acpi0 (PNP0103)
hpet0: mem 0xfed00000-0xfed003ff
hpet0: Found 64-bits HPET, will only use lowest 32-bits
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
com3 at acpi0 (PNP0501)
com3: io 0x3f8-0x3ff irq 4
com3: ns16550a, working fifo
PNP0C01 [System Board] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: passive cooling mode only
acpitz0: critical 126.0C
apm0 at acpi0: Power Management spec V1.2
acpiacad0: AC adapter online.
acpibat0: battery info: SMP, LION, DELL GD7756, 1859
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi1: attached to attimer1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82945GM/PM/GMS Host Bridge (rev. 0x03)
agp0 at pchb0: can't find internal VGA device config space
ppb0 at pci0 dev 1 function 0: Intel product 0x27a1 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga1 at pci1 dev 0 function 0: NVIDIA product 0x01d7 (rev. 0xa1)
vga1: WARNING: ignoring 64-bit BAR @ 0x14
vga1: WARNING: ignoring 64-bit BAR @ 0x1c
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
direct rendering for vga1 unsupported
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at irq 11
azalia0: host: Intel 82801GB/GR High Definition Audio Controller (rev. 1)
azalia0: host: High Definition Audio rev. 1.0
ppb1 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x01)
pci2 at ppb1 bus 11
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2 (rev. 0x01)
pci3 at ppb2 bus 12
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
wpi0 at pci3 dev 0 function 0: Intel PRO/Wireless LAN 3945ABG Mini-PCI Adapter (rev. 0x02)
LNKB: Picked IRQ 5 with weight 1
wpi0: interrupting at irq 5
wpi0: 802.11 address 00:13:02:a5:b6:ea
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb3 at pci0 dev 28 function 2: Intel 82801GB/GR PCI Express Port #3 (rev. 0x01)
pci4 at ppb3 bus 9
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci4 dev 0 function 0: Broadcom BCM5752 Gigabit Ethernet
LNKC: Picked IRQ 10 with weight 1
bge0: interrupting at irq 10
bge0: ASIC BCM5752 A2 (0x6002), Ethernet address 00:15:c5:3d:d4:af
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5752 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci2: interrupting at irq 9
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci3: interrupting at irq 5
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x01)
ehci0: interrupting at irq 10
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb4 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe1)
pci5 at ppb4 bus 3
pci5: i/o space, memory space enabled
cbb0 at pci5 dev 1 function 0: O2 Micro OZ6912/OZ6972 PCI-CardBus Bridge (rev. 0x40)
cbb0: interrupting at irq 10
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: Intel 82801GBM LPC Interface Bridge (rev. 0x01)
ichlpcib0: TCO (watchdog) timer configured.
ichlpcib0: No SpeedStep
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801GBM/GHM Serial ATA Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801GB/GR SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured
isa at ichlpcib0 not configured
isa0 at mainbus0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
WARNING: Callback scheduled before sysmon task queue thread present.
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Sigmatel STAC9220 (rev. 34.1)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia0: playback: max channels=2, encodings=1<PCM>
azalia0: playback: PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0: recording: max channels=2, encodings=1<PCM>
azalia0: recording: PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0: codec[1]: 0x14f1/0x2bfa (rev. 0.0)
azalia0: codec[1]: High Definition Audio rev. 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
audio0 at azalia0: full duplex, independent
Kernelized RAIDframe activated
Too many symbols for tree, skipping 1083 symbols
uhub5 at uhub0 port 2
uhub5: Dell product 0xa005, class 9/0, rev 2.00/50.18, addr 2
uhub5: 4 ports with 0 removable, self powered
wd0 at atabus0 drive 0: <Hitachi HTS541040G9SA00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <_NEC DVD+/-RW ND-6650A, , 102C> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhub6 at uhub5 port 3
uhub6: O2 Micro product 0x7761, class 9/0, rev 1.10/1.10, addr 3
uhub6: 3 ports with 2 removable, bus powered
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ugen0 at uhub6 port 2
ugen0: O2 O2Micro CCID SC Reader, rev 1.10/1.10, addr 4
ubt0 at uhub5 port 4
ubt0: Dell TrueMobile 350 Bluetooth USB Adapter, rev 2.00/24.22, addr 5
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

--FCuugMFkClbJLl1L--

--7iMSBzlTiPOCCT2k
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (NetBSD)

iD8DBQFGN50w0/VH7L7F7Y4RAkg4AJoDmbG6QagD906mtAAJsVhs7saHmACeIgyr
lJTKQGRNMderB+Bg7Oy28fs=
=LsSK
-----END PGP SIGNATURE-----

--7iMSBzlTiPOCCT2k--