Subject: timeout delayed and mouse hangs with tl(4)
To: None <tech-kern@netbsd.org>
From: Mario Kemper <magick@zhadum.de>
List: tech-kern
Date: 02/10/2003 20:59:57
        Hello,

i installed a Compaq Dual Port Netelligent today. The first thing
i noticed are hundreds of "timeout delayed -x" Messages. 
The second thing is, that the mouse hangs when there's traffic on the line.
I use one port of the card for DSL via pppoe. The second port ist connected
to a switch.

This is what dmesg says:

tl0 at pci3 dev 0 function 0
tl0: Compaq Dual Port Netelligent 10/100 TX
tl0: Ethernet address 00:08:c7:5d:66:80
tl0: interrupting at apic 2 int 2 (irq 5)
nsphy0 at tl0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy0 at tl0 phy 31: ThunderLAN 10BASE-T media interface, rev. 5
tlphy0: 10base5
tl1 at pci3 dev 1 function 0
tl1: Compaq Dual Port Netelligent 10/100 TX
tl1: Ethernet address 00:08:c7:5d:66:00
tl1: interrupting at apic 2 int 4 (irq 9)
nsphy1 at tl1 phy 1: DP83840 10/100 media interface, rev. 1
nsphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy1 at tl1 phy 31: ThunderLAN 10BASE-T media interface, rev. 5
tlphy1: 10base5

irq 9 and 5 are shared with the USB controllers which could explain the
mouse hangs:
tl0: interrupting at apic 2 int 2 (irq 5)
tl1: interrupting at apic 2 int 4 (irq 9)
siop0: interrupting at apic 2 int 22 (irq 9)
pciide0: using apic 2 int 23 (irq 9) for native-PCI interrupt
bktr0: interrupting at apic 2 int 21 (irq 5)
uhci1: interrupting at apic 2 int 23 (irq 9)
ohci0: interrupting at apic 2 int 21 (irq 5)
ohci1: interrupting at apic 2 int 22 (irq 9)
ehci0: interrupting at apic 2 int 23 (irq 9)
tl0: interrupting at apic 2 int 2 (irq 5)
tl1: interrupting at apic 2 int 4 (irq 9)
siop0: interrupting at apic 2 int 22 (irq 9)
pciide0: using apic 2 int 23 (irq 9) for native-PCI interrupt
bktr0: interrupting at apic 2 int 21 (irq 5)
uhci1: interrupting at apic 2 int 23 (irq 9)

magick@bundy:~>uname -a
NetBSD bundy 1.6N NetBSD 1.6N (BUNDY) #9: Mon Feb 10 19:45:50 CET 2003     
root@:/usr/src/sys/arch/i386/compile/BUNDY i386

Can anybody tell me what happens? The card worked withoud problems in 
a friends pc under netbsd.


-- 
Mario Kemper
magick@zhadum.de