> 
> C) THIS NEEDS TO BE TESTED THOROUGHLY.  I've got ~360k of `diff -c2'
> and I'm not even done yet.  The two low-level drivers with the most
> changes are being tested locally; so mainly the high-level drivers
> need to be tested on more devices.
> 
> 
> If you have suggestions on other things that need to be done, or how
> to do the above better, let me know...
> 
One other functional nit I've had is that all devices must be powered on
at probe time (boot). In many cases one might decide to power up the
tape drive later or that cdrom drive. It would be very nice to re-probe
when a device is powered on (or off). Another way might be to probe
at open.

Also were dk stats ever implemented for the scsi devices ?



=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
 John Brezak                    UUCP:     uunet!apollo.hp!brezak
 Hewlett Packard/Apollo         Internet: brezak@ch.hp.com
 300 Apollo Drive               Phone:    (508) 436-4915
 Chelmsford, Massachusetts      Fax:      (508) 436-5140