CVS commit: src/sys/dev/pci/ixgbe

["SAITOH Masanobu" <msaitoh%netbsd.org@localhost>]

Module Name:    src
Committed By:   msaitoh
Date:           Wed Oct  4 07:13:00 UTC 2017

Modified Files:
        src/sys/dev/pci/ixgbe: ixgbe.c

Log Message:
- Remove half-duplex setting for more than 1000Mbps in ixgbe_add_media_types()
  because those medias are not in the spec.
- Add 2.5GBASE-T and 5GBASE-T support. Tested with X550-T1.

Example:
ixg0: flags=0x8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        capabilities=fff80<TSO4,IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx>
        capabilities=fff80<TCP4CSUM_Tx,UDP4CSUM_Rx,UDP4CSUM_Tx,TCP6CSUM_Rx>
        capabilities=fff80<TCP6CSUM_Tx,UDP6CSUM_Rx,UDP6CSUM_Tx,TSO6,LRO>
        enabled=7ff80<TSO4,IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx>
        enabled=7ff80<TCP4CSUM_Tx,UDP4CSUM_Rx,UDP4CSUM_Tx,TCP6CSUM_Rx>
        enabled=7ff80<TCP6CSUM_Tx,UDP6CSUM_Rx,UDP6CSUM_Tx,TSO6>
        ec_capabilities=7<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU>
        ec_enabled=7<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU>
        address: a0:36:9f:b0:f5:b0
        media: Ethernet 2.5GBASE-T full-duplex
        status: active
        supported Ethernet media:
                media 10Gbase-T
                media 10Gbase-T mediaopt full-duplex
                media 1000baseT
                media 1000baseT mediaopt full-duplex
                media 100baseTX
                media 100baseTX mediaopt full-duplex
                media 2.5GBASE-T mediaopt full-duplex
                media 5GBASE-T mediaopt full-duplex
                media autoselect
        inet 172.16.0.1/24 broadcast 172.16.0.255 flags 0x0
        inet6 fe80::a236:9fff:feb0:f5b0%ixg0/64 flags 0x0 scopeid 0x1


To generate a diff of this commit:
cvs rdiff -u -r1.102 -r1.103 src/sys/dev/pci/ixgbe/ixgbe.c

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.