[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
CVS commit: [netbsd-6] src/sys
Module Name: src
Committed By: bouyer
Date: Wed Sep 18 20:00:53 UTC 2013
src/sys/arch/sandpoint/stand/altboot [netbsd-6]: brdsetup.c rge.c
src/sys/dev/ic [netbsd-6]: rtl8169.c
Pull up following revision(s) (requested by phx in ticket #946):
sys/arch/sandpoint/stand/altboot/rge.c: revision 1.7
sys/arch/sandpoint/stand/altboot/brdsetup.c: revision 1.32
sys/dev/ic/rtl8169.c: revision 1.138
QNAP V200 boards have no EEPROM for the MAC address, so all devices default
to the same address (00:e0:4c:69:20:01).
Now we read the real MAC address from the flash ROM. It is stored at the
beginning of a 512-byte block in ASCII format. Some QNAP's have a broken
ext2 file system, so we cannot look for the file ETH0.MAC_ADDR therein,
but have to search the whole flash in 512-byte steps for candidates...
Make re(4) driver always use IDR register values for its MAC address.
Some sandpoint NAS firmwares set MAC address per their
firmware settings and don't use re(4)'s EEPROM values.
Per rtl8169 manuals re(4) chip reads EEPROM automatically after
hardware reset and Linux driver also uses IDR registers,
so this change should not affect existing other boards
which actually have vaild EEPROM.
Per discussion in old tech-kern@ thread:
Note rtl81x9.c is still shared among rtk(4) only for a multicast function
(to avoid boring refactoring work).
To generate a diff of this commit:
cvs rdiff -u -r1.27 -r188.8.131.52 \
cvs rdiff -u -r1.6 -r184.108.40.206 src/sys/arch/sandpoint/stand/altboot/rge.c
cvs rdiff -u -r220.127.116.11 -r18.104.22.168 src/sys/dev/ic/rtl8169.c
Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.
Main Index |
Thread Index |