CVS commit: src/sys/dev/ic

[Jason R Thorpe <thorpej%netbsd.org@localhost>]

Module Name:    src
Committed By:   thorpej
Date:           Fri Aug 29 05:50:42 UTC 2003

Modified Files:
        src/sys/dev/ic: aic79xx.c

Log Message:
Apply the following change from 06/28/2003 04:46:54 by gibbs to the
FreeBSD ahd driver:

Fix a race condition in the flushing of commands that
have completed across the bus but not to the host before
processing of an exception condition (busfree, bus reset,
etc.).  When flushing the controller of completed commands,
we also look for packetized commands that have completed
with good status and are stored in the "good status fifo".
The hardware will post to the good status fifo even if
data for that command is still active in a FIFO.  In
one particular failure case, a command outstanding on the
bus reconnected, transferred data into a FIFO, and provided
good status while the host driver was processing an expected
busfree event (PPR message negotiation).  This resulted in
an entry in the good status fifo that we completed, but
since the sequencer was paused, the data in the data FIFO
for this command had never been transferred to the host.
Once the busfree processing was complete, the sequencer
was unpaused, and the data completed its transfer to the
host.  In some instances, the client for the data was notified
of the completion and attempted to view the data before
it arrived.  This case only occurred during FreeBSD's
multi-target probe of the SCSI bus while some devices are
negotiating to go packetized and some devices are already
running in packetized.

The fix is to run and FIFOs active with a context in the
good status fifo to completion before completing the command
to the SCSI layer.  This requies duplicating the FIFO rundown
operations in the host driver that would usually be handled
by the firmware, but there is no other alternative.

Don't blindly shutdown the SCB dma engine when restarting
the sequencer.  We may be killing an operation that is
not supposed to be cancelled.  The cases where we need to
shutdown these dma engines are already handled elsewhere in
the driver.

Fix a few more ahd_in?() -> ahd_in?_scbram() instances.


To generate a diff of this commit:
cvs rdiff -r1.20 -r1.21 src/sys/dev/ic/aic79xx.c

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.