Source-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[src-draft/trunk]: src/sys/dev/pci Fix locking.



details:   https://anonhg.NetBSD.org/src-all/rev/63c747f4e969
branches:  trunk
changeset: 378056:63c747f4e969
user:      Nathanial Sloss <nat%netbsd.org@localhost>
date:      Fri Apr 28 01:16:05 2023 +1000

description:
Fix locking.

diffstat:

 sys/dev/pci/if_iwn.c |  20 ++++++--------------
 1 files changed, 6 insertions(+), 14 deletions(-)

diffs (90 lines):

diff -r b1f6b191cebc -r 63c747f4e969 sys/dev/pci/if_iwn.c
--- a/sys/dev/pci/if_iwn.c      Thu Apr 27 23:44:42 2023 +1000
+++ b/sys/dev/pci/if_iwn.c      Fri Apr 28 01:16:05 2023 +1000
@@ -926,7 +926,9 @@ printf("SET_CHANNEL\n");
         * are already taken care of by their respective firmware commands.
         */
        if (ic->ic_opmode == IEEE80211_M_MONITOR) {
+               mutex_enter(&sc->sc_mtx);
                error = iwn_config(vap);
+               mutex_exit(&sc->sc_mtx);
                if (error != 0)
                device_printf(sc->sc_dev,
                    "%s: error %d settting channel\n", __func__, error);
@@ -2373,9 +2375,11 @@ iwn_calib_timeout(void *arg)
        if (++sc->calib_cnt >= 120) {
                uint32_t flags = 0;
 
+               mutex_enter(&sc->sc_mtx);
                DPRINTF(("sending request for statistics\n"));
                (void)iwn_cmd(sc, IWN_CMD_GET_STATISTICS, &flags,
                    sizeof flags, 1);
+               mutex_exit(&sc->sc_mtx);
                sc->calib_cnt = 0;
        }
        splx(s);
@@ -3899,9 +3903,7 @@ iwn_cmd(struct iwn_softc *sc, int code, 
        if (async)
                return 0;
 
-       mutex_enter(&sc->sc_mtx);
        error = cv_timedwait_sig(&sc->t_event, &sc->sc_mtx, hz);
-       mutex_exit(&sc->sc_mtx);
 
        return error;
 }
@@ -5818,11 +5820,9 @@ iwn5000_query_calibration(struct iwn_sof
                return error;
 
        /* Wait at most two seconds for calibration to complete. */
-       if (!(sc->sc_flags & IWN_FLAG_CALIB_DONE)) {
-               mutex_enter(&sc->sc_mtx);
+       if (!(sc->sc_flags & IWN_FLAG_CALIB_DONE))
                error = cv_timedwait_sig(&sc->t_event, &sc->sc_mtx, hz * 2);
-               mutex_exit(&sc->sc_mtx);
-       }
+
        return error;
 }
 
@@ -6153,14 +6153,11 @@ iwn4965_load_firmware(struct iwn_softc *
        IWN_WRITE(sc, IWN_RESET, 0);
 
        /* Wait at most one second for first alive notification. */
-       mutex_enter(&sc->sc_mtx);
        if ((error = cv_timedwait_sig(&sc->t_event, &sc->sc_mtx, hz)) != 0) {
-               mutex_exit(&sc->sc_mtx);
                aprint_error_dev(sc->sc_dev,
                    "timeout waiting for adapter to initialize\n");
                return error;
        }
-       mutex_exit(&sc->sc_mtx);
 
        /* Retrieve current temperature for initial TX power calibration. */
        sc->rawtemp = sc->ucode_info.temp[3].chan20MHz;
@@ -6223,9 +6220,7 @@ iwn5000_load_firmware_section(struct iwn
        iwn_nic_unlock(sc);
 
        /* Wait at most five seconds for FH DMA transfer to complete. */
-       mutex_enter(&sc->sc_mtx);
        error = cv_timedwait_sig(&sc->t_event, &sc->sc_mtx, hz * 5);
-       mutex_exit(&sc->sc_mtx);
 
        return error;
 }
@@ -6815,15 +6810,12 @@ iwn_hw_init(struct iwn_softc *sc)
                    "could not load firmware\n");
                return error;
        }
-       mutex_enter(&sc->sc_mtx);
        /* Wait at most one second for firmware alive notification. */
        if ((error = cv_timedwait_sig(&sc->t_event, &sc->sc_mtx, hz)) != 0) {
-               mutex_exit(&sc->sc_mtx);
                aprint_error_dev(sc->sc_dev,
                    "timeout waiting for adapter to initialize\n");
                return error;
        }
-       mutex_exit(&sc->sc_mtx);
 
        /* Do post-firmware initialization. */
        return ops->post_alive(sc);



Home | Main Index | Thread Index | Old Index